lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH next 3/6] ARM: dts: beagle-x15: switch to new cpsw switch drv
Date
Switch all TI AM5728 BeagleBoard-X15 boards to use new cpsw switch driver.
Those boards have 2 Ext. port wired and configured in dual_mac mode by
default. Hence, dual_mac mode has been preserved the same way between
legacy and new driver it's safe to switch drivers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index b3a0206ebd6c..79338fb7dbee 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -451,7 +451,7 @@
<&dra7_pmx_core 0x3f8>;
};

-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@1 {
reg = <1>;
};
@@ -461,21 +461,20 @@
};
};

-&mac {
+&mac_sw {
status = "okay";
- dual_emac;
};

-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-rxid";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};

-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&phy1>;
phy-mode = "rgmii-rxid";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};

&mmc1 {
--
2.17.1
\
 
 \ /
  Last update: 2020-09-07 22:22    [W:0.103 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site