lkml.org 
[lkml]   [2020]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/8] rtc: rx8010: don't use magic values for time buffer length
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The time buffer len is used directly in this driver. For readability
it's better to define a constant.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/rtc/rtc-rx8010.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c
index 67ff06a76629..f3bed7be2533 100644
--- a/drivers/rtc/rtc-rx8010.c
+++ b/drivers/rtc/rtc-rx8010.c
@@ -48,6 +48,8 @@

#define RX8010_ALARM_AE BIT(7)

+#define RX8010_TIME_BUF_LEN 7
+
static const struct i2c_device_id rx8010_id[] = {
{ "rx8010", 0 },
{ }
@@ -108,7 +110,7 @@ static irqreturn_t rx8010_irq_1_handler(int irq, void *dev_id)
static int rx8010_get_time(struct device *dev, struct rtc_time *dt)
{
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
- u8 date[7];
+ u8 date[RX8010_TIME_BUF_LEN];
int flagreg, err;

flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
@@ -121,8 +123,8 @@ static int rx8010_get_time(struct device *dev, struct rtc_time *dt)
}

err = i2c_smbus_read_i2c_block_data(rx8010->client, RX8010_SEC,
- 7, date);
- if (err != 7)
+ RX8010_TIME_BUF_LEN, date);
+ if (err != RX8010_TIME_BUF_LEN)
return err < 0 ? err : -EIO;

dt->tm_sec = bcd2bin(date[RX8010_SEC - RX8010_SEC] & 0x7f);
@@ -139,7 +141,7 @@ static int rx8010_get_time(struct device *dev, struct rtc_time *dt)
static int rx8010_set_time(struct device *dev, struct rtc_time *dt)
{
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
- u8 date[7];
+ u8 date[RX8010_TIME_BUF_LEN];
int ctrl, flagreg, err;

if ((dt->tm_year < 100) || (dt->tm_year > 199))
@@ -164,7 +166,8 @@ static int rx8010_set_time(struct device *dev, struct rtc_time *dt)
date[RX8010_WDAY - RX8010_SEC] = bin2bcd(1 << dt->tm_wday);

err = i2c_smbus_write_i2c_block_data(rx8010->client,
- RX8010_SEC, 7, date);
+ RX8010_SEC, RX8010_TIME_BUF_LEN,
+ date);
if (err < 0)
return err;

--
2.26.1
\
 
 \ /
  Last update: 2020-09-04 17:23    [W:0.094 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site