lkml.org 
[lkml]   [2020]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RFC v2 11/11] scsi: storvsc: Support PAGE_SIZE larger than 4K
Date
From: Boqun Feng <boqun.feng@gmail.com> Sent: Tuesday, September 1, 2020 8:01 PM
>
> Hyper-V always use 4k page size (HV_HYP_PAGE_SIZE), so when
> communicating with Hyper-V, a guest should always use HV_HYP_PAGE_SIZE
> as the unit for page related data. For storvsc, the data is
> vmbus_packet_mpb_array. And since in scsi_cmnd, sglist of pages (in unit
> of PAGE_SIZE) is used, we need convert pages in the sglist of scsi_cmnd
> into Hyper-V pages in vmbus_packet_mpb_array.
>
> This patch does the conversion by dividing pages in sglist into Hyper-V
> pages, offset and indexes in vmbus_packet_mpb_array are recalculated
> accordingly.
>
> Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
> ---
> drivers/scsi/storvsc_drv.c | 60 ++++++++++++++++++++++++++++++++++----
> 1 file changed, 54 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
> index 8f5f5dc863a4..3f6610717d4e 100644
> --- a/drivers/scsi/storvsc_drv.c
> +++ b/drivers/scsi/storvsc_drv.c
> @@ -1739,23 +1739,71 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct
> scsi_cmnd *scmnd)
> payload_sz = sizeof(cmd_request->mpb);
>
> if (sg_count) {
> - if (sg_count > MAX_PAGE_BUFFER_COUNT) {
> + unsigned int hvpg_idx = 0;
> + unsigned int j = 0;
> + unsigned long hvpg_offset = sgl->offset & ~HV_HYP_PAGE_MASK;
> + unsigned int hvpg_count = HVPFN_UP(hvpg_offset + length);
>
> - payload_sz = (sg_count * sizeof(u64) +
> + if (hvpg_count > MAX_PAGE_BUFFER_COUNT) {
> +
> + payload_sz = (hvpg_count * sizeof(u64) +
> sizeof(struct vmbus_packet_mpb_array));
> payload = kzalloc(payload_sz, GFP_ATOMIC);
> if (!payload)
> return SCSI_MLQUEUE_DEVICE_BUSY;
> }
>
> + /*
> + * sgl is a list of PAGEs, and payload->range.pfn_array
> + * expects the page number in the unit of HV_HYP_PAGE_SIZE (the
> + * page size that Hyper-V uses, so here we need to divide PAGEs
> + * into HV_HYP_PAGE in case that PAGE_SIZE > HV_HYP_PAGE_SIZE.
> + */
> payload->range.len = length;
> - payload->range.offset = sgl[0].offset;
> + payload->range.offset = sgl[0].offset & ~HV_HYP_PAGE_MASK;
> + hvpg_idx = sgl[0].offset >> HV_HYP_PAGE_SHIFT;
>
> cur_sgl = sgl;
> - for (i = 0; i < sg_count; i++) {
> - payload->range.pfn_array[i] =
> - page_to_pfn(sg_page((cur_sgl)));
> + for (i = 0, j = 0; i < sg_count; i++) {
> + /*
> + * "PAGE_SIZE / HV_HYP_PAGE_SIZE - hvpg_idx" is the #
> + * of HV_HYP_PAGEs in the current PAGE.
> + *
> + * "hvpg_count - j" is the # of unhandled HV_HYP_PAGEs.
> + *
> + * As shown in the following, the minimal of both is
> + * the # of HV_HYP_PAGEs, we need to handle in this
> + * PAGE.
> + *
> + * |------------------ PAGE ----------------------|
> + * | PAGE_SIZE / HV_HYP_PAGE_SIZE in total |
> + * |hvpg|hvpg| ... |hvpg|... |hvpg|
> + * ^ ^
> + * hvpg_idx |
> + * ^ |
> + * +---(hvpg_count - j)--+
> + *
> + * or
> + *
> + * |------------------ PAGE ----------------------|
> + * | PAGE_SIZE / HV_HYP_PAGE_SIZE in total |
> + * |hvpg|hvpg| ... |hvpg|... |hvpg|
> + * ^ ^
> + * hvpg_idx |
> + * ^ |
> + * +---(hvpg_count - j)------------------------+
> + */
> + unsigned int nr_hvpg = min((unsigned int)(PAGE_SIZE / HV_HYP_PAGE_SIZE) - hvpg_idx,
> + hvpg_count - j);
> + unsigned int k;
> +
> + for (k = 0; k < nr_hvpg; k++) {
> + payload->range.pfn_array[j] =
> + page_to_hvpfn(sg_page((cur_sgl))) + hvpg_idx + k;
> + j++;
> + }
> cur_sgl = sg_next(cur_sgl);
> + hvpg_idx = 0;
> }

This code works; I don't see any errors. But I think it can be made simpler based
on doing two things:
1) Rather than iterating over the sg_count, and having to calculate nr_hvpg on
each iteration, base the exit decision on having filled up the pfn_array[]. You've
already calculated the exact size of the array that is needed given the data
length, so it's easy to exit when the array is full.
2) In the inner loop, iterate from hvpg_idx to PAGE_SIZE/HV_HYP_PAGE_SIZE
rather than from 0 to a calculated value.

Also, as an optimization, pull page_to_hvpfn(sg_page((cur_sgl)) out of the
inner loop.

I think this code does it (though I haven't tested it):

for (j = 0; ; sgl = sg_next(sgl)) {
unsigned int k;
unsigned long pfn;

pfn = page_to_hvpfn(sg_page(sgl));
for (k = hvpg_idx; k < (unsigned int)(PAGE_SIZE /HV_HYP_PAGE_SIZE); k++) {
payload->range.pfn_array[j] = pfn + k;
if (++j == hvpg_count)
goto done;
}
hvpg_idx = 0;
}
done:

This approach also makes the limit of the inner loop a constant, and that
constant will be 1 when page size is 4K. So the compiler should be able to
optimize away the loop in that case.

Michael






> }
>
> --
> 2.28.0

\
 
 \ /
  Last update: 2020-09-05 04:56    [W:0.125 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site