lkml.org 
[lkml]   [2020]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/5] dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC
Date
Document the PCIe DT bindings for SM8250 SoC. The PCIe IP is similar to
the one used on SDM845, hence just add the compatible along with the
optional "atu" register region.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Documentation/devicetree/bindings/pci/qcom,pcie.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 02bc81bb8b2d..3b55310390a0 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -13,6 +13,7 @@
- "qcom,pcie-ipq8074" for ipq8074
- "qcom,pcie-qcs404" for qcs404
- "qcom,pcie-sdm845" for sdm845
+ - "qcom,pcie-sm8250" for sm8250

- reg:
Usage: required
@@ -27,6 +28,7 @@
- "dbi" DesignWare PCIe registers
- "elbi" External local bus interface registers
- "config" PCIe configuration space
+ - "atu" ATU address space (optional)

- device_type:
Usage: required
@@ -131,7 +133,7 @@
- "slave_bus" AXI Slave clock

-clock-names:
- Usage: required for sdm845
+ Usage: required for sdm845 and sm8250
Value type: <stringlist>
Definition: Should contain the following entries
- "aux" Auxiliary clock
@@ -206,7 +208,7 @@
- "ahb" AHB reset

- reset-names:
- Usage: required for sdm845
+ Usage: required for sdm845 and sm8250
Value type: <stringlist>
Definition: Should contain the following entries
- "pci" PCIe core reset
--
2.17.1
\
 
 \ /
  Last update: 2020-09-30 17:10    [W:0.087 / U:9.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site