| From | <> | Subject | Re: [PATCH v13 15/15] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode | Date | Wed, 30 Sep 2020 09:12:17 +0000 |
| |
On 9/16/20 3:44 PM, Pratyush Yadav wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Since this flash doesn't have a Profile 1.0 table, the Octal DTR > capabilities are enabled in the post SFDP fixup, along with the 8D-8D-8D > fast read settings. > > Enable Octal DTR mode with 20 dummy cycles to allow running at the > maximum supported frequency of 200Mhz. > > The flash supports the soft reset sequence. So, add the flag in the > flash's info. > > Signed-off-by: Pratyush Yadav <p.yadav@ti.com> > --- > drivers/mtd/spi-nor/micron-st.c | 102 +++++++++++++++++++++++++++++++- > 1 file changed, 101 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c > index ef3695080710..cc02c1418d1d 100644 > --- a/drivers/mtd/spi-nor/micron-st.c > +++ b/drivers/mtd/spi-nor/micron-st.c > @@ -8,10 +8,110 @@
similar comments to those in 14/15 apply here as well. Looks good. I couldn't find datasheets for neither of flashes though.
Cheers, ta
|