lkml.org 
[lkml]   [2020]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/6] dt-bindings: iio: sx9310: Add various settings as DT properties
Date
We need to set various bits in the hardware registers for this device to
operate properly depending on how it is installed. Add a handful of DT
properties to configure these things.

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
.../iio/proximity/semtech,sx9310.yaml | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index 5739074d3592..a85b8fa25861 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -40,6 +40,61 @@ properties:
"#io-channel-cells":
const: 1

+ semtech,cs0-ground:
+ description: Indicates the CS0 sensor is connected to ground.
+ type: boolean
+
+ semtech,combined-sensors:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ List of which sensors are combined and represented by CS3.
+ Possible values are -
+ 3 - CS3 (internal)
+ 0 1 - CS0 + CS1
+ 1 2 - CS1 + CS2 (default)
+ 0 1 2 3 - CS0 + CS1 + CS2 + CS3
+ minItems: 1
+ maxItems: 4
+
+ semtech,resolution:
+ description:
+ Capacitance measure resolution. Refer to datasheet for more details.
+ enum:
+ - coarsest
+ - very-coarse
+ - coarse
+ - medium-coarse
+ - medium
+ - fine
+ - very-fine
+ - finest
+
+ semtech,startup-sensor:
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Sensor used for start-up proximity detection. The combined
+ sensor is represented by the value 3. This is used for initial
+ compensation.
+
+ semtech,proxraw-strength:
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [0, 2, 4, 8]
+ default: 2
+ description:
+ PROXRAW filter strength. A value of 0 represents off, and other values
+ represent 1-1/N.
+
+ semtech,avg-pos-strength:
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+ default: 16
+ description:
+ Average positive filter strength. A value of 0 represents off and
+ UINT_MAX (4294967295) represents infinite. Other values
+ represent 1-1/N.
+
required:
- compatible
- reg
@@ -61,5 +116,11 @@ examples:
vdd-supply = <&pp3300_a>;
svdd-supply = <&pp1800_prox>;
#io-channel-cells = <1>;
+ semtech,cs0-ground;
+ semtech,combined-sensors = <1 2 3>;
+ semtech,resolution = "fine";
+ semtech,startup-sensor = <1>;
+ semtech,proxraw-strength = <2>;
+ semtech,avg-pos-strength = <64>;
};
};
--
Sent by a computer, using git, on the internet
\
 
 \ /
  Last update: 2020-09-30 09:58    [W:0.119 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site