lkml.org 
[lkml]   [2020]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 04/10] rpmsg: Move common structures and defines to headers
On Mon, Sep 21, 2020 at 06:09:54PM -0600, Mathieu Poirier wrote:
> From: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
>
> virtio_rpmsg_bus.c keeps RPMsg protocol structure declarations and
> common defines like the ones, needed for name-space announcements,
> internal. Move them to common headers instead.
>
> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
> [Renamed header file from linux/rpmsg/rpmsg_virtio.h to linux/rpmsg_ns.h]

No, this isn't only for the name-service, the message header is common
for all RPMsg messages.

Thanks
Guennadi

> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> ---
> drivers/rpmsg/virtio_rpmsg_bus.c | 78 +-----------------------------
> include/linux/rpmsg_ns.h | 83 ++++++++++++++++++++++++++++++++
> include/uapi/linux/rpmsg.h | 3 ++
> 3 files changed, 88 insertions(+), 76 deletions(-)
> create mode 100644 include/linux/rpmsg_ns.h
>
> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
> index e87cf0b79542..eaf3b2c012c8 100644
> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> @@ -19,6 +19,7 @@
> #include <linux/mutex.h>
> #include <linux/of_device.h>
> #include <linux/rpmsg.h>
> +#include <linux/rpmsg_ns.h>
> #include <linux/scatterlist.h>
> #include <linux/slab.h>
> #include <linux/sched.h>
> @@ -27,6 +28,7 @@
> #include <linux/virtio_ids.h>
> #include <linux/virtio_config.h>
> #include <linux/wait.h>
> +#include <uapi/linux/rpmsg.h>
>
> #include "rpmsg_internal.h"
>
> @@ -70,58 +72,6 @@ struct virtproc_info {
> struct rpmsg_endpoint *ns_ept;
> };
>
> -/* The feature bitmap for virtio rpmsg */
> -#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
> -
> -/**
> - * struct rpmsg_hdr - common header for all rpmsg messages
> - * @src: source address
> - * @dst: destination address
> - * @reserved: reserved for future use
> - * @len: length of payload (in bytes)
> - * @flags: message flags
> - * @data: @len bytes of message payload data
> - *
> - * Every message sent(/received) on the rpmsg bus begins with this header.
> - */
> -struct rpmsg_hdr {
> - __virtio32 src;
> - __virtio32 dst;
> - __virtio32 reserved;
> - __virtio16 len;
> - __virtio16 flags;
> - u8 data[];
> -} __packed;
> -
> -/**
> - * struct rpmsg_ns_msg - dynamic name service announcement message
> - * @name: name of remote service that is published
> - * @addr: address of remote service that is published
> - * @flags: indicates whether service is created or destroyed
> - *
> - * This message is sent across to publish a new service, or announce
> - * about its removal. When we receive these messages, an appropriate
> - * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
> - * or ->remove() handler of the appropriate rpmsg driver will be invoked
> - * (if/as-soon-as one is registered).
> - */
> -struct rpmsg_ns_msg {
> - char name[RPMSG_NAME_SIZE];
> - __virtio32 addr;
> - __virtio32 flags;
> -} __packed;
> -
> -/**
> - * enum rpmsg_ns_flags - dynamic name service announcement flags
> - *
> - * @RPMSG_NS_CREATE: a new remote service was just created
> - * @RPMSG_NS_DESTROY: a known remote service was just destroyed
> - */
> -enum rpmsg_ns_flags {
> - RPMSG_NS_CREATE = 0,
> - RPMSG_NS_DESTROY = 1,
> -};
> -
> /**
> * struct virtio_rpmsg_channel - rpmsg channel descriptor
> * @rpdev: the rpmsg channel device
> @@ -139,27 +89,6 @@ struct virtio_rpmsg_channel {
> #define to_virtio_rpmsg_channel(_rpdev) \
> container_of(_rpdev, struct virtio_rpmsg_channel, rpdev)
>
> -/*
> - * We're allocating buffers of 512 bytes each for communications. The
> - * number of buffers will be computed from the number of buffers supported
> - * by the vring, upto a maximum of 512 buffers (256 in each direction).
> - *
> - * Each buffer will have 16 bytes for the msg header and 496 bytes for
> - * the payload.
> - *
> - * This will utilize a maximum total space of 256KB for the buffers.
> - *
> - * We might also want to add support for user-provided buffers in time.
> - * This will allow bigger buffer size flexibility, and can also be used
> - * to achieve zero-copy messaging.
> - *
> - * Note that these numbers are purely a decision of this driver - we
> - * can change this without changing anything in the firmware of the remote
> - * processor.
> - */
> -#define MAX_RPMSG_NUM_BUFS (512)
> -#define MAX_RPMSG_BUF_SIZE (512)
> -
> /*
> * Local addresses are dynamically allocated on-demand.
> * We do not dynamically assign addresses from the low 1024 range,
> @@ -167,9 +96,6 @@ struct virtio_rpmsg_channel {
> */
> #define RPMSG_RESERVED_ADDRESSES (1024)
>
> -/* Address 53 is reserved for advertising remote services */
> -#define RPMSG_NS_ADDR (53)
> -
> static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
> static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len);
> static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len,
> diff --git a/include/linux/rpmsg_ns.h b/include/linux/rpmsg_ns.h
> new file mode 100644
> index 000000000000..aabc6c3c0d6d
> --- /dev/null
> +++ b/include/linux/rpmsg_ns.h
> @@ -0,0 +1,83 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef _LINUX_RPMSG_NS_H
> +#define _LINUX_RPMSG_NS_H
> +
> +#include <linux/mod_devicetable.h>
> +#include <linux/types.h>
> +#include <linux/virtio_types.h>
> +
> +/**
> + * struct rpmsg_hdr - common header for all rpmsg messages
> + * @src: source address
> + * @dst: destination address
> + * @reserved: reserved for future use
> + * @len: length of payload (in bytes)
> + * @flags: message flags
> + * @data: @len bytes of message payload data
> + *
> + * Every message sent(/received) on the rpmsg bus begins with this header.
> + */
> +struct rpmsg_hdr {
> + __virtio32 src;
> + __virtio32 dst;
> + __virtio32 reserved;
> + __virtio16 len;
> + __virtio16 flags;
> + u8 data[];
> +} __packed;
> +
> +/**
> + * struct rpmsg_ns_msg - dynamic name service announcement message
> + * @name: name of remote service that is published
> + * @addr: address of remote service that is published
> + * @flags: indicates whether service is created or destroyed
> + *
> + * This message is sent across to publish a new service, or announce
> + * about its removal. When we receive these messages, an appropriate
> + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
> + * or ->remove() handler of the appropriate rpmsg driver will be invoked
> + * (if/as-soon-as one is registered).
> + */
> +struct rpmsg_ns_msg {
> + char name[RPMSG_NAME_SIZE];
> + __virtio32 addr;
> + __virtio32 flags;
> +} __packed;
> +
> +/**
> + * enum rpmsg_ns_flags - dynamic name service announcement flags
> + *
> + * @RPMSG_NS_CREATE: a new remote service was just created
> + * @RPMSG_NS_DESTROY: a known remote service was just destroyed
> + */
> +enum rpmsg_ns_flags {
> + RPMSG_NS_CREATE = 0,
> + RPMSG_NS_DESTROY = 1,
> +};
> +
> +/*
> + * We're allocating buffers of 512 bytes each for communications. The
> + * number of buffers will be computed from the number of buffers supported
> + * by the vring, upto a maximum of 512 buffers (256 in each direction).
> + *
> + * Each buffer will have 16 bytes for the msg header and 496 bytes for
> + * the payload.
> + *
> + * This will utilize a maximum total space of 256KB for the buffers.
> + *
> + * We might also want to add support for user-provided buffers in time.
> + * This will allow bigger buffer size flexibility, and can also be used
> + * to achieve zero-copy messaging.
> + *
> + * Note that these numbers are purely a decision of this driver - we
> + * can change this without changing anything in the firmware of the remote
> + * processor.
> + */
> +#define MAX_RPMSG_NUM_BUFS 512
> +#define MAX_RPMSG_BUF_SIZE 512
> +
> +/* Address 53 is reserved for advertising remote services */
> +#define RPMSG_NS_ADDR 53
> +
> +#endif
> diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
> index e14c6dab4223..d669c04ef289 100644
> --- a/include/uapi/linux/rpmsg.h
> +++ b/include/uapi/linux/rpmsg.h
> @@ -24,4 +24,7 @@ struct rpmsg_endpoint_info {
> #define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info)
> #define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2)
>
> +/* The feature bitmap for virtio rpmsg */
> +#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
> +
> #endif
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2020-09-30 08:54    [W:0.201 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site