lkml.org 
[lkml]   [2020]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 06/13] PCI/ERR: Limit AER resets in pcie_do_recovery()
Date
From: Sean V Kelley <sean.v.kelley@intel.com>

In some cases a bridge may not exist as the hardware
controlling may be handled only by firmware and so is
not visible to the OS. This scenario is also possible
in future use cases involving non-native use of RCECs
by firmware. So explicitly apply conditional logic
around these resets by limiting them to root ports and
downstream ports.

Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
---
drivers/pci/pcie/err.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index c6922c099c76..9e552330155b 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -203,9 +203,12 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
pci_dbg(dev, "broadcast resume message\n");
pci_walk_bus(bus, report_resume, &status);

- if (pcie_aer_is_native(dev))
- pcie_clear_device_status(dev);
- pci_aer_clear_nonfatal_status(dev);
+ if (type == PCI_EXP_TYPE_ROOT_PORT ||
+ type == PCI_EXP_TYPE_DOWNSTREAM) {
+ if (pcie_aer_is_native(bridge))
+ pcie_clear_device_status(bridge);
+ pci_aer_clear_nonfatal_status(bridge);
+ }
pci_info(dev, "device recovery successful\n");
return status;

--
2.28.0
\
 
 \ /
  Last update: 2020-09-30 23:59    [W:0.145 / U:4.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site