lkml.org 
[lkml]   [2020]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v14 11/15] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT
Date
A Soft Reset sequence will return the flash to Power-on-Reset (POR)
state. It consists of two commands: Soft Reset Enable and Soft Reset.
Find out if the sequence is supported from BFPT DWORD 16.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
---
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/sfdp.c | 4 ++++
drivers/mtd/spi-nor/sfdp.h | 2 ++
3 files changed, 7 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 105a4ddeb309..0a775a7b5606 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -27,6 +27,7 @@ enum spi_nor_option_flags {
SNOR_F_HAS_4BIT_BP = BIT(12),
SNOR_F_HAS_SR_BP3_BIT6 = BIT(13),
SNOR_F_IO_MODE_EN_VOLATILE = BIT(14),
+ SNOR_F_SOFT_RESET = BIT(15),
};

struct spi_nor_read_command {
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index 0b5b9ea44cfc..f6d77004fd4e 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -608,6 +608,10 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
break;
}

+ /* Soft Reset support. */
+ if (bfpt.dwords[BFPT_DWORD(16)] & BFPT_DWORD16_SWRST_EN_RST)
+ nor->flags |= SNOR_F_SOFT_RESET;
+
/* Stop here if not JESD216 rev C or later. */
if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
index 6d7243067252..89152ae1cf3e 100644
--- a/drivers/mtd/spi-nor/sfdp.h
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -90,6 +90,8 @@ struct sfdp_bfpt {
#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */

+#define BFPT_DWORD16_SWRST_EN_RST BIT(12)
+
#define BFPT_DWORD18_CMD_EXT_MASK GENMASK(30, 29)
#define BFPT_DWORD18_CMD_EXT_REP (0x0UL << 29) /* Repeat */
#define BFPT_DWORD18_CMD_EXT_INV (0x1UL << 29) /* Invert */
--
2.28.0
\
 
 \ /
  Last update: 2020-09-30 20:59    [W:0.228 / U:1.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site