lkml.org 
[lkml]   [2020]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v14 09/15] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE
Date
From: Tudor Ambarus <tudor.ambarus@microchip.com>

We don't want to enter a stateful mode, where a X-X-X I/O mode
is entered by setting a non-volatile bit, because in case of a
reset or a crash, once in the non-volatile mode, we may not be able
to recover in bootloaders and we may break the SPI NOR boot.

Forbid by default the I/O modes that are set via a non-volatile bit.

SPI_NOR_IO_MODE_EN_VOLATILE should be set just for the flashes that
don't define the optional SFDP SCCR Map, so that we don't pollute the
flash info flags.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
---
drivers/mtd/spi-nor/core.c | 6 ++++++
drivers/mtd/spi-nor/core.h | 6 ++++++
2 files changed, 12 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 6b54a923002a..b42d59ab2724 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3085,6 +3085,9 @@ static int spi_nor_octal_dtr_enable(struct spi_nor *nor, bool enable)
nor->write_proto == SNOR_PROTO_8_8_8_DTR))
return 0;

+ if (!(nor->flags & SNOR_F_IO_MODE_EN_VOLATILE))
+ return 0;
+
ret = nor->params->octal_dtr_enable(nor, enable);
if (ret)
return ret;
@@ -3422,6 +3425,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (info->flags & SPI_NOR_4B_OPCODES)
nor->flags |= SNOR_F_4B_OPCODES;

+ if (info->flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+ nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+
ret = spi_nor_set_addr_width(nor);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 5cfe2db9ee13..105a4ddeb309 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -26,6 +26,7 @@ enum spi_nor_option_flags {
SNOR_F_HAS_SR_TB_BIT6 = BIT(11),
SNOR_F_HAS_4BIT_BP = BIT(12),
SNOR_F_HAS_SR_BP3_BIT6 = BIT(13),
+ SNOR_F_IO_MODE_EN_VOLATILE = BIT(14),
};

struct spi_nor_read_command {
@@ -322,6 +323,11 @@ struct flash_info {
*/
#define SPI_NOR_OCTAL_DTR_READ BIT(19) /* Flash supports octal DTR Read. */
#define SPI_NOR_OCTAL_DTR_PP BIT(20) /* Flash supports Octal DTR Page Program */
+#define SPI_NOR_IO_MODE_EN_VOLATILE BIT(21) /*
+ * Flash enables the best
+ * available I/O mode via a
+ * volatile bit.
+ */

/* Part specific fixup hooks. */
const struct spi_nor_fixups *fixups;
--
2.28.0
\
 
 \ /
  Last update: 2020-09-30 20:58    [W:0.169 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site