lkml.org 
[lkml]   [2020]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 11/21] spi: dw: Unmask IRQs after enabling the chip
Date
It's theoretically erroneous to enable IRQ before the chip is turned on.
If IRQ handler gets executed before the chip is enabled, then any data
written to the Tx FIFO will be just ignored.

I say "theoretically" because we haven't noticed any problem with that,
but let's fix it anyway just in case...

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
drivers/spi/spi-dw-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index db3fec4195f7..58a7c7465c61 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -376,8 +376,6 @@ static int dw_spi_transfer_one(struct spi_controller *master,
spi_enable_chip(dws, 1);
return ret;
}
- } else {
- dw_spi_irq_setup(dws);
}

spi_enable_chip(dws, 1);
@@ -385,6 +383,8 @@ static int dw_spi_transfer_one(struct spi_controller *master,
if (dws->dma_mapped)
return dws->dma_ops->dma_transfer(dws, transfer);

+ dw_spi_irq_setup(dws);
+
return 1;
}

--
2.27.0
\
 
 \ /
  Last update: 2020-09-30 20:56    [W:0.146 / U:1.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site