lkml.org 
[lkml]   [2020]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 80/80] ARM: dts: bcm2711: Enable the display pipeline
From
Date
Hi,

Am 30.09.20 um 18:38 schrieb Nathan Chancellor:
> On Wed, Sep 30, 2020 at 04:07:58PM +0200, Maxime Ripard wrote:
>> Hi Nathan,
>>
>> On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
>>> On Thu, Sep 03, 2020 at 10:01:52AM +0200, Maxime Ripard wrote:
>>>> Now that all the drivers have been adjusted for it, let's bring in the
>>>> necessary device tree changes.
>>>>
>>>> The VEC and PV3 are left out for now, since it will require a more specific
>>>> clock setup.
>>>>
>>>> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
>>>> Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
>>>> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
>>>> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
>>>> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
>>> Apologies if this has already been reported or have a solution but this
>>> patch (and presumably series) breaks output to the serial console after
>>> a certain point during init. On Raspbian, I see systemd startup messages
>>> then the output just turns into complete garbage. It looks like this
>>> patch is merged first in linux-next, which is why my bisect fell on the
>>> DRM merge. I am happy to provide whatever information could be helpful
>>> for debugging this. I am on the latest version of the firmware
>>> (currently 26620cc9a63c6cb9965374d509479b4ee2c30241).
>> Unfortunately, the miniUART is in the same clock tree than the core
>> clock and will thus have those kind of issues when the core clock is
>> changed (which is also something that one should expect when using the
>> DRM or other drivers).
>>
>> The only real workaround there would be to switch to one of the PL011
>> UARTs. I guess we can also somehow make the UART react to the core clock
>> frequency changes, but that's going to require some effort
>>
>> Maxime
> Ack, thank you for the reply! There does not really seem to be a whole
> ton of documentation around using one of the other PL011 UARTs so for
> now, I will just revert this commit locally.

there was a patch series & discussion about this topic, but we finally
didn't find a rock solid solution.

You can have a look at "[RFC 5/5] serial: 8250: bcm2835aux: add notifier
to follow clock changes" from 3.4.2019 on linux-rpi-kernel.

Best regards

>
> Cheers,
> Nathan

\
 
 \ /
  Last update: 2020-09-30 18:58    [W:0.201 / U:12.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site