lkml.org 
[lkml]   [2020]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 01/10] vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
From
Date
Hi Diana,

On 8/26/20 11:33 AM, Diana Craciun wrote:
> From: Bharat Bhushan <Bharat.Bhushan@nxp.com>
>
> DPAA2 (Data Path Acceleration Architecture) consists in
> mechanisms for processing Ethernet packets, queue management,
> accelerators, etc.
>
> The Management Complex (mc) is a hardware entity that manages the DPAA2
> hardware resources. It provides an object-based abstraction for software
> drivers to use the DPAA2 hardware. The MC mediates operations such as
> create, discover, destroy of DPAA2 objects.
> The MC provides memory-mapped I/O command interfaces (MC portals) which
> DPAA2 software drivers use to operate on DPAA2 objects.
>
> A DPRC is a container object that holds other types of DPAA2 objects.
> Each object in the DPRC is a Linux device and bound to a driver.
> The MC-bus driver is a platform driver (different from PCI or platform
> bus). The DPRC driver does runtime management of a bus instance. It
> performs the initial scan of the DPRC and handles changes in the DPRC
> configuration (adding/removing objects).
>
> All objects inside a container share the same hardware isolation
> context, meaning that only an entire DPRC can be assigned to
> a virtual machine.
> When a container is assigned to a virtual machine, all the objects
> within that container are assigned to that virtual machine.
> The DPRC container assigned to the virtual machine is not allowed
> to change contents (add/remove objects) by the guest. The restriction
> is set by the host and enforced by the mc hardware.
>
> The DPAA2 objects can be directly assigned to the guest. However
> the MC portals (the memory mapped command interface to the MC) need
> to be emulated because there are commands that configure the
> interrupts and the isolation IDs which are virtual in the guest.
>
> Example:
> echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override
> echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind
>
> The dprc.2 is bound to the VFIO driver and all the objects within
> dprc.2 are going to be bound to the VFIO driver.
>
> This patch adds the infrastructure for VFIO support for fsl-mc
> devices. Subsequent patches will add support for binding and secure
> assigning these devices using VFIO.
>
> More details about the DPAA2 objects can be found here:
> Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
>
> Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
> ---
> MAINTAINERS | 6 +
> drivers/vfio/Kconfig | 1 +
> drivers/vfio/Makefile | 1 +
> drivers/vfio/fsl-mc/Kconfig | 9 ++
> drivers/vfio/fsl-mc/Makefile | 4 +
> drivers/vfio/fsl-mc/vfio_fsl_mc.c | 160 ++++++++++++++++++++++
> drivers/vfio/fsl-mc/vfio_fsl_mc_private.h | 14 ++
> include/uapi/linux/vfio.h | 1 +
> 8 files changed, 196 insertions(+)
> create mode 100644 drivers/vfio/fsl-mc/Kconfig
> create mode 100644 drivers/vfio/fsl-mc/Makefile
> create mode 100644 drivers/vfio/fsl-mc/vfio_fsl_mc.c
> create mode 100644 drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3b186ade3597..f3f9ea108588 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -18229,6 +18229,12 @@ F: drivers/vfio/
> F: include/linux/vfio.h
> F: include/uapi/linux/vfio.h
>
> +VFIO FSL-MC DRIVER
> +M: Diana Craciun <diana.craciun@oss.nxp.com>
> +L: kvm@vger.kernel.org
> +S: Maintained
> +F: drivers/vfio/fsl-mc/
> +
> VFIO MEDIATED DEVICE DRIVERS
> M: Kirti Wankhede <kwankhede@nvidia.com>
> L: kvm@vger.kernel.org
> diff --git a/drivers/vfio/Kconfig b/drivers/vfio/Kconfig
> index fd17db9b432f..5533df91b257 100644
> --- a/drivers/vfio/Kconfig
> +++ b/drivers/vfio/Kconfig
> @@ -47,4 +47,5 @@ menuconfig VFIO_NOIOMMU
> source "drivers/vfio/pci/Kconfig"
> source "drivers/vfio/platform/Kconfig"
> source "drivers/vfio/mdev/Kconfig"
> +source "drivers/vfio/fsl-mc/Kconfig"
> source "virt/lib/Kconfig"
> diff --git a/drivers/vfio/Makefile b/drivers/vfio/Makefile
> index de67c4725cce..fee73f3d9480 100644
> --- a/drivers/vfio/Makefile
> +++ b/drivers/vfio/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_VFIO_SPAPR_EEH) += vfio_spapr_eeh.o
> obj-$(CONFIG_VFIO_PCI) += pci/
> obj-$(CONFIG_VFIO_PLATFORM) += platform/
> obj-$(CONFIG_VFIO_MDEV) += mdev/
> +obj-$(CONFIG_VFIO_FSL_MC) += fsl-mc/
> diff --git a/drivers/vfio/fsl-mc/Kconfig b/drivers/vfio/fsl-mc/Kconfig
> new file mode 100644
> index 000000000000..b1a527d6b6f2
> --- /dev/null
> +++ b/drivers/vfio/fsl-mc/Kconfig
> @@ -0,0 +1,9 @@
> +config VFIO_FSL_MC
> + tristate "VFIO support for QorIQ DPAA2 fsl-mc bus devices"
> + depends on VFIO && FSL_MC_BUS && EVENTFD
> + help
> + Driver to enable support for the VFIO QorIQ DPAA2 fsl-mc
> + (Management Complex) devices. This is required to passthrough
> + fsl-mc bus devices using the VFIO framework.
> +
> + If you don't know what to do here, say N.
> diff --git a/drivers/vfio/fsl-mc/Makefile b/drivers/vfio/fsl-mc/Makefile
> new file mode 100644
> index 000000000000..0c6e5d2ddaae
> --- /dev/null
> +++ b/drivers/vfio/fsl-mc/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +
> +vfio-fsl-mc-y := vfio_fsl_mc.o
> +obj-$(CONFIG_VFIO_FSL_MC) += vfio-fsl-mc.o
> diff --git a/drivers/vfio/fsl-mc/vfio_fsl_mc.c b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
> new file mode 100644
> index 000000000000..8b53c2a25b32
> --- /dev/null
> +++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
> @@ -0,0 +1,160 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright 2013-2016 Freescale Semiconductor Inc.
> + * Copyright 2016-2017,2019-2020 NXP
> + */
> +
> +#include <linux/device.h>
> +#include <linux/iommu.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/vfio.h>
> +#include <linux/fsl/mc.h>
> +
> +#include "vfio_fsl_mc_private.h"
> +
> +static int vfio_fsl_mc_open(void *device_data)
> +{
> + if (!try_module_get(THIS_MODULE))
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +static void vfio_fsl_mc_release(void *device_data)
> +{
> + module_put(THIS_MODULE);
> +}
> +
> +static long vfio_fsl_mc_ioctl(void *device_data, unsigned int cmd,
> + unsigned long arg)
> +{
> + switch (cmd) {
> + case VFIO_DEVICE_GET_INFO:
> + {
> + return -ENOTTY;
> + }
> + case VFIO_DEVICE_GET_REGION_INFO:
> + {
> + return -ENOTTY;
> + }
> + case VFIO_DEVICE_GET_IRQ_INFO:
> + {
> + return -ENOTTY;
> + }
> + case VFIO_DEVICE_SET_IRQS:
> + {
> + return -ENOTTY;
> + }
> + case VFIO_DEVICE_RESET:
> + {
> + return -ENOTTY;
> + }
> + default:
> + return -ENOTTY;
> + }
> +}
> +
> +static ssize_t vfio_fsl_mc_read(void *device_data, char __user *buf,
> + size_t count, loff_t *ppos)
> +{
> + return -EINVAL;
> +}
> +
> +static ssize_t vfio_fsl_mc_write(void *device_data, const char __user *buf,
> + size_t count, loff_t *ppos)
> +{
> + return -EINVAL;
> +}
> +
> +static int vfio_fsl_mc_mmap(void *device_data, struct vm_area_struct *vma)
> +{
> + return -EINVAL;
> +}
> +
> +static const struct vfio_device_ops vfio_fsl_mc_ops = {
> + .name = "vfio-fsl-mc",
> + .open = vfio_fsl_mc_open,
> + .release = vfio_fsl_mc_release,
> + .ioctl = vfio_fsl_mc_ioctl,
> + .read = vfio_fsl_mc_read,
> + .write = vfio_fsl_mc_write,
> + .mmap = vfio_fsl_mc_mmap,
> +};
> +
> +static int vfio_fsl_mc_probe(struct fsl_mc_device *mc_dev)
> +{
> + struct iommu_group *group;
> + struct vfio_fsl_mc_device *vdev;
> + struct device *dev = &mc_dev->dev;
> + int ret;
> +
> + group = vfio_iommu_group_get(dev);
> + if (!group) {
> + dev_err(dev, "%s: VFIO: No IOMMU group\n", __func__);
> + return -EINVAL;
> + }
> +
> + vdev = devm_kzalloc(dev, sizeof(*vdev), GFP_KERNEL);
> + if (!vdev) {
> + vfio_iommu_group_put(group, dev);
> + return -ENOMEM;
> + }
> +
> + vdev->mc_dev = mc_dev;
> +
> + ret = vfio_add_group_dev(dev, &vfio_fsl_mc_ops, vdev);
> + if (ret) {
> + dev_err(dev, "%s: Failed to add to vfio group\n", __func__);
> + vfio_iommu_group_put(group, dev);
> + return ret;
> + }
> +
> + return ret;
nit: introduce out_group_put: as in other files
This will be usable also in subsequent patches
> +}
> +
> +static int vfio_fsl_mc_remove(struct fsl_mc_device *mc_dev)
> +{
> + struct vfio_fsl_mc_device *vdev;
> + struct device *dev = &mc_dev->dev;
> +
> + vdev = vfio_del_group_dev(dev);
> + if (!vdev)
> + return -EINVAL;
> +
> + vfio_iommu_group_put(mc_dev->dev.iommu_group, dev);
> +
> + return 0;
> +}
> +
> +/*
> + * vfio-fsl_mc is a meta-driver, so use driver_override interface to
> + * bind a fsl_mc container with this driver and match_id_table is NULL.
> + */
> +static struct fsl_mc_driver vfio_fsl_mc_driver = {
> + .probe = vfio_fsl_mc_probe,
> + .remove = vfio_fsl_mc_remove,
> + .match_id_table = NULL,
not needed?
> + .driver = {
> + .name = "vfio-fsl-mc",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init vfio_fsl_mc_driver_init(void)
> +{
> + return fsl_mc_driver_register(&vfio_fsl_mc_driver);
> +}
> +
> +static void __exit vfio_fsl_mc_driver_exit(void)
> +{
> + fsl_mc_driver_unregister(&vfio_fsl_mc_driver);
> +}
> +
> +module_init(vfio_fsl_mc_driver_init);
> +module_exit(vfio_fsl_mc_driver_exit);
> +
> +MODULE_LICENSE("GPL v2");
Don't you need MODULE_LICENSE("Dual BSD/GPL"); ?
> +MODULE_DESCRIPTION("VFIO for FSL-MC devices - User Level meta-driver");
> diff --git a/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
> new file mode 100644
> index 000000000000..e79cc116f6b8
> --- /dev/null
> +++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
> @@ -0,0 +1,14 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
> +/*
> + * Copyright 2013-2016 Freescale Semiconductor Inc.
> + * Copyright 2016,2019-2020 NXP
> + */
> +
> +#ifndef VFIO_FSL_MC_PRIVATE_H
> +#define VFIO_FSL_MC_PRIVATE_H
> +
> +struct vfio_fsl_mc_device {
> + struct fsl_mc_device *mc_dev;
> +};
> +
> +#endif /* VFIO_FSL_MC_PRIVATE_H */
> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> index 920470502329..95deac891378 100644
> --- a/include/uapi/linux/vfio.h
> +++ b/include/uapi/linux/vfio.h
> @@ -201,6 +201,7 @@ struct vfio_device_info {
> #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */
> #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */
> #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */
> +#define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6) /* vfio-fsl-mc device */
> __u32 num_regions; /* Max region index + 1 */
> __u32 num_irqs; /* Max IRQ index + 1 */
> };
>
Thanks

Eric

\
 
 \ /
  Last update: 2020-09-03 17:00    [W:0.706 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site