lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 07/17] ARM: debug: add UART early console support for SD5203
From
Date
Hi Zhen Lei,

On 2020/9/29 22:14, Zhen Lei wrote:
> From: Kefeng Wang <wangkefeng.wang@huawei.com>
>
> Add support of early console for SD5203.
>
> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

Thanks!
Applied to the hisilicon arm32 SoC tree.

Best Regards,
Wei

> ---
> arch/arm/Kconfig.debug | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 80000a66a4e3549..d27a7764c3bfb46 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -1086,6 +1086,14 @@ choice
> on SA-11x0 UART ports. The kernel will check for the first
> enabled UART in a sequence 3-1-2.
>
> + config DEBUG_SD5203_UART
> + bool "Hisilicon SD5203 Debug UART"
> + depends on ARCH_SD5203
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want kernel low-level debugging support
> + on SD5203 UART.
> +
> config DEBUG_SOCFPGA_UART0
> depends on ARCH_SOCFPGA
> bool "Use SOCFPGA UART0 for low-level debug"
> @@ -1639,6 +1647,7 @@ config DEBUG_UART_PHYS
> default 0x11006000 if DEBUG_MT6589_UART0
> default 0x11009000 if DEBUG_MT8135_UART3
> default 0x16000000 if DEBUG_INTEGRATOR
> + default 0x1600d000 if DEBUG_SD5203_UART
> default 0x18000300 if DEBUG_BCM_5301X
> default 0x18000400 if DEBUG_BCM_HR2
> default 0x18010000 if DEBUG_SIRFATLAS7_UART0
> @@ -1841,7 +1850,7 @@ config DEBUG_UART_VIRT
> default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
> default 0xfec90000 if DEBUG_RK32_UART2
> default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
> - default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
> + default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
> default 0xfed60000 if DEBUG_RK29_UART0
> default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
> default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
>

\
 
 \ /
  Last update: 2020-09-30 05:07    [W:0.145 / U:3.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site