lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/4] drivers/perf: Add support for ARMv8.3-SPE
From
Date
Hi Will,

On 2020/9/7 20:51, Will Deacon wrote:
> On Fri, Jul 24, 2020 at 05:16:04PM +0800, Wei Li wrote:
>> Armv8.3 extends the SPE by adding:
>> - Alignment field in the Events packet, and filtering on this event
>> using PMSEVFR_EL1.
>> - Support for the Scalable Vector Extension (SVE).
>>
>> The main additions for SVE are:
>> - Recording the vector length for SVE operations in the Operation Type
>> packet. It is not possible to filter on vector length.
>> - Incomplete predicate and empty predicate fields in the Events packet,
>> and filtering on these events using PMSEVFR_EL1.
>>
>> Update the check of pmsevfr for empty/partial predicated SVE and
>> alignment event in kernel driver.
>>
>> Signed-off-by: Wei Li <liwei391@huawei.com>
>> ---
>> arch/arm64/include/asm/sysreg.h | 4 +++-
>> drivers/perf/arm_spe_pmu.c | 18 ++++++++++++++----
>> 2 files changed, 17 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
>> index 463175f80341..be4c44ccdb56 100644
>> --- a/arch/arm64/include/asm/sysreg.h
>> +++ b/arch/arm64/include/asm/sysreg.h
>> @@ -281,7 +281,6 @@
>> #define SYS_PMSFCR_EL1_ST_SHIFT 18
>>
>> #define SYS_PMSEVFR_EL1 sys_reg(3, 0, 9, 9, 5)
>> -#define SYS_PMSEVFR_EL1_RES0 0x0000ffff00ff0f55UL
>
> I think we can just update this mask unconditionally to allow the new bits.
>
>> #define SYS_PMSLATFR_EL1 sys_reg(3, 0, 9, 9, 6)
>> #define SYS_PMSLATFR_EL1_MINLAT_SHIFT 0
>> @@ -769,6 +768,9 @@
>> #define ID_AA64DFR0_PMUVER_8_5 0x6
>> #define ID_AA64DFR0_PMUVER_IMP_DEF 0xf
>>
>> +#define ID_AA64DFR0_PMSVER_8_2 0x1
>> +#define ID_AA64DFR0_PMSVER_8_3 0x2
>> +
>> #define ID_DFR0_PERFMON_SHIFT 24
>>
>> #define ID_DFR0_PERFMON_8_1 0x4
>> diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
>> index e51ddb6d63ed..5ec7ee0c8fa1 100644
>> --- a/drivers/perf/arm_spe_pmu.c
>> +++ b/drivers/perf/arm_spe_pmu.c
>> @@ -54,7 +54,7 @@ struct arm_spe_pmu {
>> struct hlist_node hotplug_node;
>>
>> int irq; /* PPI */
>> -
>> + int pmuver;
>
> nit: please call this "pmsver" to align with the architecture (where
> "pmuver" means something else).

OK, i will rename it in v2.

>> u16 min_period;
>> u16 counter_sz;
>>
>> @@ -80,6 +80,15 @@ struct arm_spe_pmu {
>> /* Keep track of our dynamic hotplug state */
>> static enum cpuhp_state arm_spe_pmu_online;
>>
>> +static u64 sys_pmsevfr_el1_mask[] = {
>> + [ID_AA64DFR0_PMSVER_8_2] = GENMASK_ULL(63, 48) | GENMASK_ULL(31, 24) |
>> + GENMASK_ULL(15, 12) | BIT_ULL(7) | BIT_ULL(5) | BIT_ULL(3) |
>> + BIT_ULL(1),
>> + [ID_AA64DFR0_PMSVER_8_3] = GENMASK_ULL(63, 48) | GENMASK_ULL(31, 24) |
>> + GENMASK_ULL(18, 17) | GENMASK_ULL(15, 11) | BIT_ULL(7) |
>> + BIT_ULL(5) | BIT_ULL(3) | BIT_ULL(1),
>> +};
>
> As I said above, you can drop this and just update the #define.
>
>> +
>> enum arm_spe_pmu_buf_fault_action {
>> SPE_PMU_BUF_FAULT_ACT_SPURIOUS,
>> SPE_PMU_BUF_FAULT_ACT_FATAL,
>> @@ -670,7 +679,7 @@ static int arm_spe_pmu_event_init(struct perf_event *event)
>> !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
>> return -ENOENT;
>>
>> - if (arm_spe_event_to_pmsevfr(event) & SYS_PMSEVFR_EL1_RES0)
>> + if (arm_spe_event_to_pmsevfr(event) & ~sys_pmsevfr_el1_mask[spe_pmu->pmuver])
>> return -EOPNOTSUPP;
>
> Same here.

What if we use these new bits on the system which just support ARMv8.2-SPE?
It will return success and never work, i don't think that is suitable.

>>
>> if (attr->exclude_idle)
>> @@ -937,6 +946,7 @@ static void __arm_spe_pmu_dev_probe(void *info)
>> fld, smp_processor_id());
>> return;
>> }
>> + spe_pmu->pmuver = fld;
>>
>> /* Read PMBIDR first to determine whether or not we have access */
>> reg = read_sysreg_s(SYS_PMBIDR_EL1);
>> @@ -1027,8 +1037,8 @@ static void __arm_spe_pmu_dev_probe(void *info)
>> }
>>
>> dev_info(dev,
>> - "probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
>> - cpumask_pr_args(&spe_pmu->supported_cpus),
>> + "v%d probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
>> + spe_pmu->pmuver, cpumask_pr_args(&spe_pmu->supported_cpus),
>
> There's no need for this. If userspace finds this information useful, then
> we should expose it in sysfs, like we do for other PMU paramaters. If
> userspace doesn't find it useful, then there's no need to expose it at all.
>
> So I would suggest adding something like SPE_PMU_CAP_PMSVER and exposing the
> field on a per-SPE-PMU basis in sysfs.

We may need this as then we can know which events are supported. It is meaningful to testcases.
So i will expose it as cap attribute in v2.

> big.LITTLE should work as before, where we expose a completely separate PMU
> instance for each CPU type.
>

The of_compatible of SPE PMU is "arm,statistical-profiling-extension-v1", and the platform_device
name is "arm,spe-v1". Should we add a "v2" entry for ARMv8.3-SPE or not?

Thanks for your time.

Best regards,
Wei

\
 
 \ /
  Last update: 2020-09-29 10:18    [W:0.096 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site