lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 1/2] dt-bindings: ata: ahci: ceva: Update documentation for CEVA Controller
On Tue, Sep 22, 2020 at 03:45:12PM +0530, Piyush Mehta wrote:
> This patch updates the documentation for the CEVA controller for adding
> the optional properties for 'phys' and 'resets'.
>
> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
> ---
> Documentation/devicetree/bindings/ata/ahci-ceva.txt | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
> index 7561cc4..da423eb 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
> @@ -38,6 +38,9 @@ Required properties:
>
> Optional properties:
> - ceva,broken-gen2: limit to gen1 speed instead of gen2.
> + - phys: phandle for the PHY device
> + - phy-names: Should be "sata-phy"

Not really a useful name. There's not much point to *-names when only 1.

> + - resets: phandle to the reset controller for the SATA IP
>
> Examples:
> ahci@fd0c0000 {
> @@ -56,4 +59,7 @@ Examples:
> ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
> ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
> ceva,broken-gen2;
> + phy-names = "sata-phy";
> + phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
> + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
> };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-09-29 20:10    [W:0.106 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site