lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/3] Input: Add Novatek NT36xxx touchscreen driver
On Tue, 29 Sep 2020 at 03:21, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>
> On Mon, Sep 28, 2020 at 03:18:18PM +0530, Amit Pundir wrote:
> > On Sun, 27 Sep 2020 at 18:06, <kholk11@gmail.com> wrote:
> > >
> > > From: AngeloGioacchino Del Regno <kholk11@gmail.com>
> > >
> > > This is a driver for the Novatek in-cell touch controller and
> > > supports various chips from the NT36xxx family, currently
> > > including NT36525, NT36672A, NT36676F, NT36772 and NT36870.
> > >
> > > Functionality like wake gestures and firmware flashing is not
> > > included: I am not aware of any of these DrIC+Touch combo
> > > chips not including a non-volatile memory and it should be
> > > highly unlikely to find one, since the touch firmware is
> > > embedded into the DriverIC one, which is obviously necessary
> > > to drive the display unit.
> > >
> > > However, the necessary address for the firmware update
> > > procedure was included into the address table in this driver
> > > so, in the event that someone finds the need to implement it
> > > for a reason or another, it will be pretty straightforward to.
> > >
> > > This driver is lightly based on the downstream implementation [1].
> > > [1] https://github.com/Rasenkai/caf-tsoft-Novatek-nt36xxx
> > >
> >
> > This is so cool!
> >
> > Xiaomi PocoF1 phone uses same family touchscreen IC and I could
> > test this series on that phone as well.
> >
> > However I do have to make a minor change to get it working. The
> > downstream driver and even the github code you linked above use
> > GPIO mapped IRQ, and I had to switch to that to get touchscreen
> > working with your driver
> > https://github.com/pundiramit/linux/commit/0a73eb656c1e80787dc195641ce7b0076fddb38e.
> > I wonder if I'm missing any devicetree property other than interrupts?
>
> Simply specifying GPIO controller/pin as interrupt property should work,
> there should be no need to parse custom GPIO property and convert it to
> IRQ in the driver.
>

Indeed. I don't know what was tripping me off yesterday, but I got it
working today with interrupt properties. Thank you.

Regards,
Amit Pundir

> Thanks.
>
> --
> Dmitry

\
 
 \ /
  Last update: 2020-09-29 10:00    [W:0.094 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site