lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 3/3] hwmon: (lm75) Add regulator support
Date
On Mon, 2020-09-28 at 09:39 -0700, Guenter Roeck wrote:
> On Mon, Sep 28, 2020 at 05:39:23PM +0200, Alban Bedel wrote:
> > Add regulator support for boards where the sensor first need to be
> > powered up before it can be used.
> >
> > Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> > ---
> > v2: Rely on dummy regulators instead of explicitly handling missing
> > regulator
> > ---
> > drivers/hwmon/lm75.c | 23 +++++++++++++++++++++--
> > 1 file changed, 21 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> > index ba0be48aeadd..e394df648c26 100644
> > --- a/drivers/hwmon/lm75.c
> > +++ b/drivers/hwmon/lm75.c
> > @@ -17,6 +17,7 @@
> > #include <linux/of.h>
> > #include <linux/regmap.h>
> > #include <linux/util_macros.h>
> > +#include <linux/regulator/consumer.h>
> > #include "lm75.h"
> >
> > /*
> > @@ -101,6 +102,7 @@ static const unsigned short normal_i2c[] = {
> > 0x48, 0x49, 0x4a, 0x4b, 0x4c,
> > struct lm75_data {
> > struct i2c_client *client;
> > struct regmap *regmap;
> > + struct regulator *vs;
> > u8 orig_conf;
> > u8 current_conf;
> > u8 resolution; /* In bits, 9 to 16
> > */
> > @@ -540,6 +542,7 @@ static void lm75_remove(void *data)
> > struct i2c_client *client = lm75->client;
> >
> > i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75-
> > >orig_conf);
> > + regulator_disable(lm75->vs);
> > }
> >
> > static int
> > @@ -567,6 +570,10 @@ lm75_probe(struct i2c_client *client, const
> > struct i2c_device_id *id)
> > data->client = client;
> > data->kind = kind;
> >
> > + data->vs = devm_regulator_get(dev, "vs");
> > + if (IS_ERR(data->vs))
> > + return PTR_ERR(data->vs);
> > +
> > data->regmap = devm_regmap_init_i2c(client,
> > &lm75_regmap_config);
> > if (IS_ERR(data->regmap))
> > return PTR_ERR(data->regmap);
> > @@ -581,11 +588,19 @@ lm75_probe(struct i2c_client *client, const
> > struct i2c_device_id *id)
> > data->sample_time = data->params->default_sample_time;
> > data->resolution = data->params->default_resolution;
> >
> > + /* Enable the power */
> > + err = regulator_enable(data->vs);
> > + if (err) {
> > + dev_err(dev, "failed to enable regulator: %d\n", err);
> > + return err;
> > + }
> > +
> > /* Cache original configuration */
> > status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
> > if (status < 0) {
> > dev_dbg(dev, "Can't read config? %d\n", status);
> > - return status;
> > + err = status;
> > + goto disable_regulator;
>
> The point of using devm_add_action_or_reset() was specifically to avoid having
> to have the cleanup gotos. On top of that, the lm75_remove() function was
> specifically intended to clean up configuration data, not to do anything else.
> While hijacking lm75_remove() to also disable the regulator is technically
> correct, it makes the code more difficult to understand, and it creates a
> potential source for subsequently introduced bugs. Right now I am not inclined
> to accept this code as-is. Please provide arguments for handling the cleanup
> this way instead of using devm_add_action_or_reset().

I wrote it that way to keep the memory usage lower, but I see your
point and will update the patch accordingly.

Alban

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-09-29 16:06    [W:0.089 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site