lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: layerscape: Change back to the default error response behavior
Date
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

In the current error response behavior, it will send a SLVERR response
to device's internal AXI slave system interface when the PCIe controller
experiences an erroneous completion (UR, CA and CT) from an external
completer for its outbound non-posted request, which will result in
SError and crash the kernel directly.
This patch change back it to the default behavior to increase the
robustness of the kernel. In the default behavior, it always sends an
OKAY response to the internal AXI slave interface when the controller
gets these erroneous completions. And the AER driver will report and
try to recover these errors.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
drivers/pci/controller/dwc/pci-layerscape.c | 11 -----------
1 file changed, 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index f24f79a70d9a..e92ab8a77046 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -30,8 +30,6 @@

/* PEX Internal Configuration Registers */
#define PCIE_STRFMR1 0x71c /* Symbol Timer & Filter Mask Register1 */
-#define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */
-#define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */

#define PCIE_IATU_NUM 6

@@ -123,14 +121,6 @@ static int ls_pcie_link_up(struct dw_pcie *pci)
return 1;
}

-/* Forward error response of outbound non-posted requests */
-static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
-{
- struct dw_pcie *pci = pcie->pci;
-
- iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
-}
-
static int ls_pcie_host_init(struct pcie_port *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -142,7 +132,6 @@ static int ls_pcie_host_init(struct pcie_port *pp)
* dw_pcie_setup_rc() will reconfigure the outbound windows.
*/
ls_pcie_disable_outbound_atus(pcie);
- ls_pcie_fix_error_response(pcie);

dw_pcie_dbi_ro_wr_en(pci);
ls_pcie_clear_multifunction(pcie);
--
2.17.1
\
 
 \ /
  Last update: 2020-09-29 15:23    [W:0.125 / U:5.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site