lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 5/5] arm: dts: add new device nodes to NPCM750 device tree EVB
Date
Add the following new device nodes to
NPCM750 evolution board device tree:

- NPCM7xx Pin controller and GPIO
- NPCM7xx PWM and FAN.
- NPCM7xx EHCI USB.
- NPCM7xx KCS.
- NPCM Reset.
- NPCM Peripheral SPI.
- NPCM FIU SPI.
- NPCM HWRNG.
- NPCM I2C.
- STMicro STMMAC.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 367 +++++++++++++++++-
.../boot/dts/nuvoton-npcm750-pincfg-evb.dtsi | 157 ++++++++
2 files changed, 523 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi

diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 15f744f1beea..9f13d08f5804 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -4,24 +4,161 @@

/dts-v1/;
#include "nuvoton-npcm750.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+#include "nuvoton-npcm750-pincfg-evb.dtsi"

/ {
model = "Nuvoton npcm750 Development Board (Device Tree)";
compatible = "nuvoton,npcm750";

+ aliases {
+ ethernet2 = &gmac0;
+ ethernet3 = &gmac1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ i2c14 = &i2c14;
+ i2c15 = &i2c15;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ fiu0 = &fiu0;
+ fiu1 = &fiu3;
+ fiu2 = &fiux;
+ };
+
chosen {
stdout-path = &serial3;
};

memory {
- reg = <0 0x40000000>;
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+};
+
+&gmac0 {
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&gmac1 {
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&fiu0 {
+ status = "okay";
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <2>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ partitions@80000000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bbuboot1@0 {
+ label = "bb-uboot-1";
+ reg = <0x0000000 0x80000>;
+ read-only;
+ };
+ bbuboot2@80000 {
+ label = "bb-uboot-2";
+ reg = <0x0080000 0x80000>;
+ read-only;
+ };
+ envparam@100000 {
+ label = "env-param";
+ reg = <0x0100000 0x40000>;
+ read-only;
+ };
+ spare@140000 {
+ label = "spare";
+ reg = <0x0140000 0xC0000>;
+ };
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x0200000 0x400000>;
+ };
+ rootfs@600000 {
+ label = "rootfs";
+ reg = <0x0600000 0x700000>;
+ };
+ spare1@D00000 {
+ label = "spare1";
+ reg = <0x0D00000 0x200000>;
+ };
+ spare2@0F00000 {
+ label = "spare2";
+ reg = <0x0F00000 0x200000>;
+ };
+ spare3@1100000 {
+ label = "spare3";
+ reg = <0x1100000 0x200000>;
+ };
+ spare4@1300000 {
+ label = "spare4";
+ reg = <0x1300000 0x0>;
+ };
+ };
+ };
+};
+
+&fiu3 {
+ pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
+ status = "okay";
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <2>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ partitions@A0000000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ system1@0 {
+ label = "spi3-system1";
+ reg = <0x0 0x0>;
+ };
+ };
};
};

+&fiux {
+ spix-mode;
+};
+
&watchdog1 {
status = "okay";
};

+&rng {
+ status = "okay";
+};
+
&serial0 {
status = "okay";
};
@@ -37,3 +174,231 @@
&serial3 {
status = "okay";
};
+
+&adc {
+ status = "okay";
+};
+
+&lpc_kcs {
+ kcs1: kcs1@0 {
+ status = "okay";
+ };
+
+ kcs2: kcs2@0 {
+ status = "okay";
+ };
+
+ kcs3: kcs3@0 {
+ status = "okay";
+ };
+};
+
+/* lm75 on SVB */
+&i2c0 {
+ clock-frequency = <100000>;
+ status = "okay";
+ lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ status = "okay";
+ };
+};
+
+/* lm75 on EB */
+&i2c1 {
+ clock-frequency = <100000>;
+ status = "okay";
+ lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ status = "okay";
+ };
+};
+
+/* tmp100 on EB */
+&i2c2 {
+ clock-frequency = <100000>;
+ status = "okay";
+ tmp100@48 {
+ compatible = "tmp100";
+ reg = <0x48>;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c5 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+/* tmp100 on SVB */
+&i2c6 {
+ clock-frequency = <100000>;
+ status = "okay";
+ tmp100@48 {
+ compatible = "tmp100";
+ reg = <0x48>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c8 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c9 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c10 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c11 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c14 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&pwm_fan {
+ status = "okay";
+ fan@0 {
+ reg = <0x00>;
+ fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ cooling-levels = <127 255>;
+ };
+ fan@1 {
+ reg = <0x01>;
+ fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@2 {
+ reg = <0x02>;
+ fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@3 {
+ reg = <0x03>;
+ fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@4 {
+ reg = <0x04>;
+ fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@5 {
+ reg = <0x05>;
+ fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@6 {
+ reg = <0x06>;
+ fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@7 {
+ reg = <0x07>;
+ fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+};
+
+&spi0 {
+ cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ Flash@0 {
+ compatible = "winbond,w25q128",
+ "jedec,spi-nor";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <5000000>;
+ partition@0 {
+ label = "spi0_spare1";
+ reg = <0x0000000 0x800000>;
+ };
+ partition@1 {
+ label = "spi0_spare2";
+ reg = <0x800000 0x0>;
+ };
+ };
+};
+
+&spi1 {
+ cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ Flash@0 {
+ compatible = "winbond,w25q128fw",
+ "jedec,spi-nor";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <5000000>;
+ partition@0 {
+ label = "spi1_spare1";
+ reg = <0x0000000 0x800000>;
+ };
+ partition@1 {
+ label = "spi1_spare2";
+ reg = <0x800000 0x0>;
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = < &iox1_pins
+ &pin8_input
+ &pin9_output_high
+ &pin10_input
+ &pin11_output_high
+ &pin16_input
+ &pin24_output_high
+ &pin25_output_low
+ &pin32_output_high
+ &jtag2_pins
+ &pin61_output_high
+ &pin62_output_high
+ &pin63_output_high
+ &lpc_pins
+ &pin160_input
+ &pin162_input
+ &pin168_input
+ &pin169_input
+ &pin170_input
+ &pin187_output_high
+ &pin190_input
+ &pin191_output_high
+ &pin192_output_high
+ &pin197_output_low
+ &ddc_pins
+ &pin218_input
+ &pin219_output_low
+ &pin220_output_low
+ &pin221_output_high
+ &pin222_input
+ &pin223_output_low
+ &spix_pins
+ &pin228_output_low
+ &pin231_output_high
+ &pin255_input>;
+};
+
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi b/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
new file mode 100644
index 000000000000..3b3806274adf
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology
+
+/ {
+ pinctrl: pinctrl@f0800000 {
+ pin8_input: pin8-input {
+ pins = "GPIO8/LKGPO1";
+ bias-disable;
+ input-enable;
+ };
+ pin9_output_high: pin9-output-high {
+ pins = "GPIO9/LKGPO2";
+ bias-disable;
+ output-high;
+ };
+ pin10_input: pin10-input {
+ pins = "GPIO10/IOXHLD";
+ bias-disable;
+ input-enable;
+ };
+ pin11_output_high: pin11-output-high {
+ pins = "GPIO11/IOXHCK";
+ bias-disable;
+ output-high;
+ };
+ pin16_input: pin16-input {
+ pins = "GPIO16/LKGPO0";
+ bias-disable;
+ input-enable;
+ };
+ pin24_output_high: pin24-output-high {
+ pins = "GPIO24/IOXHDO";
+ bias-disable;
+ output-high;
+ };
+ pin25_output_low: pin25-output-low {
+ pins = "GPIO25/IOXHDI";
+ bias-disable;
+ output-low;
+ };
+ pin32_output_high: pin32-output-high {
+ pins = "GPIO32/nSPI0CS1";
+ bias-disable;
+ output-high;
+ };
+ pin61_output_high: pin61-output-high {
+ pins = "GPO61/nDTR1_BOUT1/STRAP6";
+ bias-disable;
+ output-high;
+ };
+ pin62_output_high: pin62-output-high {
+ pins = "GPO62/nRTST1/STRAP5";
+ bias-disable;
+ output-high;
+ };
+ pin63_output_high: pin63-output-high {
+ pins = "GPO63/TXD1/STRAP4";
+ bias-disable;
+ output-high;
+ };
+ pin160_input: pin160-input {
+ pins = "GPIO160/CLKOUT/RNGOSCOUT";
+ bias-disable;
+ input-enable;
+ };
+ pin162_input: pin162-input {
+ pins = "GPIO162/SERIRQ";
+ bias-disable;
+ input-enable;
+ };
+ pin168_input: pin168-input {
+ pins = "GPIO168/nCLKRUN/nESPIALERT";
+ bias-disable;
+ input-enable;
+ };
+ pin169_input: pin169-input {
+ pins = "GPIO169/nSCIPME";
+ bias-disable;
+ input-enable;
+ };
+ pin170_input: pin170-input {
+ pins = "GPIO170/nSMI";
+ bias-disable;
+ input-enable;
+ };
+ pin187_output_high: pin187-output-high {
+ pins = "GPIO187/nSPI3CS1";
+ bias-disable;
+ output-high;
+ };
+ pin190_input: pin190-input {
+ pins = "GPIO190/nPRD_SMI";
+ bias-disable;
+ input-enable;
+ };
+ pin191_output_high: pin191-output-high {
+ pins = "GPIO191";
+ bias-disable;
+ output-high;
+ };
+ pin192_output_high: pin192-output-high {
+ pins = "GPIO192";
+ bias-disable;
+ output-high;
+ };
+ pin197_output_low: pin197-output-low {
+ pins = "GPIO197/SMB0DEN";
+ bias-disable;
+ output-low;
+ };
+ pin218_input: pin218-input {
+ pins = "GPIO218/nWDO1";
+ bias-disable;
+ input-enable;
+ };
+ pin219_output_low: pin219-output-low {
+ pins = "GPIO219/nWDO2";
+ bias-disable;
+ output-low;
+ };
+ pin220_output_low: pin220-output-low {
+ pins = "GPIO220/SMB12SCL";
+ bias-disable;
+ output-low;
+ };
+ pin221_output_high: pin221-output-high {
+ pins = "GPIO221/SMB12SDA";
+ bias-disable;
+ output-high;
+ };
+ pin222_input: pin222-input {
+ pins = "GPIO222/SMB13SCL";
+ bias-disable;
+ input-enable;
+ };
+ pin223_output_low: pin223-output-low {
+ pins = "GPIO223/SMB13SDA";
+ bias-disable;
+ output-low;
+ };
+ pin228_output_low: pin228-output-low {
+ pins = "GPIO228/nSPIXCS1";
+ bias-disable;
+ output-low;
+ };
+ pin231_output_high: pin231-output-high {
+ pins = "GPIO230/SPIXD3";
+ bias-disable;
+ output-high;
+ };
+ pin255_input: pin255-input {
+ pins = "GPI255/DACOSEL";
+ bias-disable;
+ input-enable;
+ };
+ };
+};
--
2.22.0
\
 
 \ /
  Last update: 2020-09-29 15:19    [W:0.059 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site