lkml.org 
[lkml]   [2020]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] Input: synaptics-rmi4 - add support for F3A
Date
RMI4 F3A supports the touchpad GPIO function, it's designed to
support more GPIOs and used on newer touchpads. This patch adds
support of the touchpad buttons.

Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/input/rmi4/Kconfig | 8 ++
drivers/input/rmi4/Makefile | 1 +
drivers/input/rmi4/rmi_bus.c | 3 +
drivers/input/rmi4/rmi_driver.h | 1 +
drivers/input/rmi4/rmi_f3a.c | 241 ++++++++++++++++++++++++++++++++
5 files changed, 254 insertions(+)
create mode 100644 drivers/input/rmi4/rmi_f3a.c

diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
index a212ff706f74..16119f760d11 100644
--- a/drivers/input/rmi4/Kconfig
+++ b/drivers/input/rmi4/Kconfig
@@ -100,6 +100,14 @@ config RMI4_F34
device via the firmware loader interface. This is triggered using a
sysfs attribute.

+config RMI4_F3A
+ bool "RMI4 Function 3A (GPIO)"
+ help
+ Say Y here if you want to add support for RMI4 function 3A.
+
+ Function 3A provides GPIO support for RMI4 devices. This includes
+ support for buttons on TouchPads and ClickPads.
+
config RMI4_F54
bool "RMI4 Function 54 (Analog diagnostics)"
depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m)
diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
index f17631656987..02f14c846861 100644
--- a/drivers/input/rmi4/Makefile
+++ b/drivers/input/rmi4/Makefile
@@ -10,6 +10,7 @@ rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o rmi_f34v7.o
+rmi_core-$(CONFIG_RMI4_F3A) += rmi_f3a.o
rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
rmi_core-$(CONFIG_RMI4_F55) += rmi_f55.o

diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
index af706a583656..47d1b97ed6cf 100644
--- a/drivers/input/rmi4/rmi_bus.c
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -365,6 +365,9 @@ static struct rmi_function_handler *fn_handlers[] = {
#ifdef CONFIG_RMI4_F34
&rmi_f34_handler,
#endif
+#ifdef CONFIG_RMI4_F3A
+ &rmi_f3a_handler,
+#endif
#ifdef CONFIG_RMI4_F54
&rmi_f54_handler,
#endif
diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
index 65bfaa95e193..1c6c6086c0e5 100644
--- a/drivers/input/rmi4/rmi_driver.h
+++ b/drivers/input/rmi4/rmi_driver.h
@@ -135,6 +135,7 @@ extern struct rmi_function_handler rmi_f11_handler;
extern struct rmi_function_handler rmi_f12_handler;
extern struct rmi_function_handler rmi_f30_handler;
extern struct rmi_function_handler rmi_f34_handler;
+extern struct rmi_function_handler rmi_f3a_handler;
extern struct rmi_function_handler rmi_f54_handler;
extern struct rmi_function_handler rmi_f55_handler;
#endif
diff --git a/drivers/input/rmi4/rmi_f3a.c b/drivers/input/rmi4/rmi_f3a.c
new file mode 100644
index 000000000000..be3c1ecc1181
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f3a.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2020 Synaptics Incorporated
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#define RMI_F3A_MAX_GPIO_COUNT 128
+#define RMI_F3A_MAX_REG_SIZE DIV_ROUND_UP(RMI_F3A_MAX_GPIO_COUNT, 8)
+
+/* Defs for Query 0 */
+#define RMI_F3A_GPIO_COUNT 0x7F
+
+#define RMI_F3A_DATA_REGS_MAX_SIZE RMI_F3A_MAX_REG_SIZE
+
+#define TRACKSTICK_RANGE_START 3
+#define TRACKSTICK_RANGE_END 6
+
+struct f3a_data {
+ /* Query Data */
+ u8 gpio_count;
+
+ u8 register_count;
+
+ u8 data_regs[RMI_F3A_DATA_REGS_MAX_SIZE];
+ u16 *gpio_key_map;
+
+ struct input_dev *input;
+
+ struct rmi_function *f03;
+ bool trackstick_buttons;
+};
+
+static void rmi_f3a_report_button(struct rmi_function *fn,
+ struct f3a_data *f3a, unsigned int button)
+{
+ u16 key_code = f3a->gpio_key_map[button];
+ bool key_down = !(f3a->data_regs[0] & BIT(button));
+
+ if (f3a->trackstick_buttons &&
+ button >= TRACKSTICK_RANGE_START &&
+ button <= TRACKSTICK_RANGE_END) {
+ rmi_f03_overwrite_button(f3a->f03, key_code, key_down);
+ } else {
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+ "%s: call input report key (0x%04x) value (0x%02x)",
+ __func__, key_code, key_down);
+ input_report_key(f3a->input, key_code, key_down);
+ }
+}
+
+static irqreturn_t rmi_f3a_attention(int irq, void *ctx)
+{
+ struct rmi_function *fn = ctx;
+ struct f3a_data *f3a = dev_get_drvdata(&fn->dev);
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+ int error;
+ int i;
+
+ if (drvdata->attn_data.data) {
+ if (drvdata->attn_data.size < f3a->register_count) {
+ dev_warn(&fn->dev,
+ "F3A interrupted, but data is missing\n");
+ return IRQ_HANDLED;
+ }
+ memcpy(f3a->data_regs, drvdata->attn_data.data,
+ f3a->register_count);
+ drvdata->attn_data.data += f3a->register_count;
+ drvdata->attn_data.size -= f3a->register_count;
+ } else {
+ error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
+ f3a->data_regs, f3a->register_count);
+ if (error) {
+ dev_err(&fn->dev,
+ "%s: Failed to read F3a data registers: %d\n",
+ __func__, error);
+ return IRQ_RETVAL(error);
+ }
+ }
+
+
+ for (i = 0; i < f3a->gpio_count; i++)
+ if (f3a->gpio_key_map[i] != KEY_RESERVED)
+ rmi_f3a_report_button(fn, f3a, i);
+ if (f3a->trackstick_buttons)
+ rmi_f03_commit_buttons(f3a->f03);
+
+ return IRQ_HANDLED;
+}
+
+static int rmi_f3a_config(struct rmi_function *fn)
+{
+ struct f3a_data *f3a = dev_get_drvdata(&fn->dev);
+ struct rmi_driver *drv = fn->rmi_dev->driver;
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(fn->rmi_dev);
+
+ if (!f3a)
+ return 0;
+
+ if (pdata->gpio_data.trackstick_buttons) {
+ /* Try [re-]establish link to F03. */
+ f3a->f03 = rmi_find_function(fn->rmi_dev, 0x03);
+ f3a->trackstick_buttons = f3a->f03 != NULL;
+ }
+
+ drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+
+ return 0;
+}
+
+static bool rmi_f3a_is_valid_button(int button, struct f3a_data *f3a,
+ u8 *query1_regs, u8 *ctrl1_regs)
+{
+ /* gpio exist && direction input */
+ return (query1_regs[0] & BIT(button)) && !(ctrl1_regs[0] & BIT(button));
+}
+
+static int rmi_f3a_map_gpios(struct rmi_function *fn, struct f3a_data *f3a,
+ u8 *query1_regs, u8 *ctrl1_regs)
+{
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(fn->rmi_dev);
+ struct input_dev *input = f3a->input;
+ unsigned int button = BTN_LEFT;
+ unsigned int trackstick_button = BTN_LEFT;
+ bool button_mapped = false;
+ int i;
+ int button_count = min_t(u8, f3a->gpio_count, TRACKSTICK_RANGE_END);
+
+ f3a->gpio_key_map = devm_kcalloc(&fn->dev,
+ button_count,
+ sizeof(f3a->gpio_key_map[0]),
+ GFP_KERNEL);
+ if (!f3a->gpio_key_map) {
+ dev_err(&fn->dev, "Failed to allocate gpio map memory.\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < button_count; i++) {
+
+ if (!rmi_f3a_is_valid_button(i, f3a, query1_regs, ctrl1_regs))
+ continue;
+
+ if (pdata->gpio_data.trackstick_buttons &&
+ i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) {
+ f3a->gpio_key_map[i] = trackstick_button++;
+ } else if (!pdata->gpio_data.buttonpad || !button_mapped) {
+ f3a->gpio_key_map[i] = button;
+ input_set_capability(input, EV_KEY, button++);
+ button_mapped = true;
+ }
+ }
+ input->keycode = f3a->gpio_key_map;
+ input->keycodesize = sizeof(f3a->gpio_key_map[0]);
+ input->keycodemax = f3a->gpio_count;
+
+ if (pdata->gpio_data.buttonpad || (button - BTN_LEFT == 1))
+ __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+
+ return 0;
+}
+
+static int rmi_f3a_initialize(struct rmi_function *fn, struct f3a_data *f3a)
+{
+ u8 query1[RMI_F3A_MAX_REG_SIZE];
+ u8 ctrl1[RMI_F3A_MAX_REG_SIZE];
+ u8 buf;
+ int error;
+
+ error = rmi_read(fn->rmi_dev, fn->fd.query_base_addr, &buf);
+ if (error < 0) {
+ dev_err(&fn->dev, "Failed to read general info register: %d\n",
+ error);
+ return -ENODEV;
+ }
+
+ f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT;
+ f3a->register_count = DIV_ROUND_UP(f3a->gpio_count, 8);
+
+ /* Query1 -> gpio exist */
+ error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr + 1,
+ query1, f3a->register_count);
+ if (error) {
+ dev_err(&fn->dev, "Failed to read query1 register\n");
+ return error;
+ }
+
+ /* Ctrl1 -> gpio direction */
+ error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr + 1,
+ ctrl1, f3a->register_count);
+ if (error) {
+ dev_err(&fn->dev, "Failed to read control1 register\n");
+ return error;
+ }
+
+ error = rmi_f3a_map_gpios(fn, f3a, query1, ctrl1);
+ if (error)
+ return error;
+ return 0;
+}
+
+static int rmi_f3a_probe(struct rmi_function *fn)
+{
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+ struct f3a_data *f3a;
+ int error;
+
+ if (!drv_data->input) {
+ dev_info(&fn->dev, "F3A: no input device found, ignoring\n");
+ return -ENXIO;
+ }
+
+ f3a = devm_kzalloc(&fn->dev, sizeof(*f3a), GFP_KERNEL);
+ if (!f3a)
+ return -ENOMEM;
+
+ f3a->input = drv_data->input;
+
+ error = rmi_f3a_initialize(fn, f3a);
+ if (error)
+ return error;
+
+ dev_set_drvdata(&fn->dev, f3a);
+ return 0;
+}
+
+struct rmi_function_handler rmi_f3a_handler = {
+ .driver = {
+ .name = "rmi4_f3a",
+ },
+ .func = 0x3a,
+ .probe = rmi_f3a_probe,
+ .config = rmi_f3a_config,
+ .attention = rmi_f3a_attention,
+};
--
2.25.1
\
 
 \ /
  Last update: 2020-09-28 07:22    [W:0.053 / U:10.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site