lkml.org 
[lkml]   [2020]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v5 05/20] ASoC: sun4i-i2s: Set sign extend sample
On Mon, Sep 28, 2020 at 3:29 AM Clément Péron <peron.clem@gmail.com> wrote:
>
> From: Marcus Cooper <codekipper@gmail.com>
>
> On the newer SoCs such as the H3 and A64 this is set by default
> to transfer a 0 after each sample in each slot. However the A10
> and A20 SoCs that this driver was developed on had a default
> setting where it padded the audio gain with zeros.
>
> This isn't a problem while we have only support for 16bit audio
> but with larger sample resolution rates in the pipeline then SEXT
> bits should be cleared so that they also pad at the LSB. Without
> this the audio gets distorted.
>
> Set sign extend sample for all the sunxi generations even if they
> are not affected. This will keep consistency and avoid relying on
> default.
>
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

\
 
 \ /
  Last update: 2020-09-28 08:52    [W:0.216 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site