lkml.org 
[lkml]   [2020]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 02/16] misc: bcm-vk: add Broadcom VK driver
Date
Add initial version of Broadcom VK driver to enumerate PCI device IDs
of Valkyrie and Viper device IDs.

VK based cards provide real-time high performance, high throughput,
low latency offload compute engine operations.
They are used for multiple parallel offload tasks as:
audio, video and image processing and crypto operations.

Further commits add additional features to driver beyond probe/remove.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
drivers/misc/Kconfig | 1 +
drivers/misc/Makefile | 1 +
drivers/misc/bcm-vk/Kconfig | 15 ++++
drivers/misc/bcm-vk/Makefile | 8 ++
drivers/misc/bcm-vk/bcm_vk.h | 29 +++++++
drivers/misc/bcm-vk/bcm_vk_dev.c | 137 +++++++++++++++++++++++++++++++
6 files changed, 191 insertions(+)
create mode 100644 drivers/misc/bcm-vk/Kconfig
create mode 100644 drivers/misc/bcm-vk/Makefile
create mode 100644 drivers/misc/bcm-vk/bcm_vk.h
create mode 100644 drivers/misc/bcm-vk/bcm_vk_dev.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index ce136d685d14..9d42b5def81b 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -469,6 +469,7 @@ source "drivers/misc/genwqe/Kconfig"
source "drivers/misc/echo/Kconfig"
source "drivers/misc/cxl/Kconfig"
source "drivers/misc/ocxl/Kconfig"
+source "drivers/misc/bcm-vk/Kconfig"
source "drivers/misc/cardreader/Kconfig"
source "drivers/misc/habanalabs/Kconfig"
source "drivers/misc/uacce/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c7bd01ac6291..766837e4b961 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_ECHO) += echo/
obj-$(CONFIG_CXL_BASE) += cxl/
obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
obj-$(CONFIG_OCXL) += ocxl/
+obj-$(CONFIG_BCM_VK) += bcm-vk/
obj-y += cardreader/
obj-$(CONFIG_PVPANIC) += pvpanic.o
obj-$(CONFIG_HABANA_AI) += habanalabs/
diff --git a/drivers/misc/bcm-vk/Kconfig b/drivers/misc/bcm-vk/Kconfig
new file mode 100644
index 000000000000..2272e47655ed
--- /dev/null
+++ b/drivers/misc/bcm-vk/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Broadcom VK device
+#
+config BCM_VK
+ tristate "Support for Broadcom VK Accelerators"
+ depends on PCI_MSI
+ help
+ Select this option to enable support for Broadcom
+ VK Accelerators. VK is used for performing
+ specific offload processing.
+ This driver enables userspace programs to access these
+ accelerators via /dev/bcm-vk.N devices.
+
+ If unsure, say N.
diff --git a/drivers/misc/bcm-vk/Makefile b/drivers/misc/bcm-vk/Makefile
new file mode 100644
index 000000000000..f8a7ac4c242f
--- /dev/null
+++ b/drivers/misc/bcm-vk/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Broadcom VK driver
+#
+
+obj-$(CONFIG_BCM_VK) += bcm_vk.o
+bcm_vk-objs := \
+ bcm_vk_dev.o
diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h
new file mode 100644
index 000000000000..9152785199ab
--- /dev/null
+++ b/drivers/misc/bcm-vk/bcm_vk.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2018-2020 Broadcom.
+ */
+
+#ifndef BCM_VK_H
+#define BCM_VK_H
+
+#include <linux/pci.h>
+
+#define DRV_MODULE_NAME "bcm-vk"
+
+/* VK device supports a maximum of 3 bars */
+#define MAX_BAR 3
+
+enum pci_barno {
+ BAR_0 = 0,
+ BAR_1,
+ BAR_2
+};
+
+#define BCM_VK_NUM_TTY 2
+
+struct bcm_vk {
+ struct pci_dev *pdev;
+ void __iomem *bar[MAX_BAR];
+};
+
+#endif
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
new file mode 100644
index 000000000000..bb24efb1b9fb
--- /dev/null
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018-2020 Broadcom.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+
+#include "bcm_vk.h"
+
+#define PCI_DEVICE_ID_VALKYRIE 0x5e87
+#define PCI_DEVICE_ID_VIPER 0x5e88
+
+/* MSIX usages */
+#define VK_MSIX_MSGQ_MAX 3
+#define VK_MSIX_NOTF_MAX 1
+#define VK_MSIX_TTY_MAX BCM_VK_NUM_TTY
+#define VK_MSIX_IRQ_MAX (VK_MSIX_MSGQ_MAX + VK_MSIX_NOTF_MAX + \
+ VK_MSIX_TTY_MAX)
+#define VK_MSIX_IRQ_MIN_REQ (VK_MSIX_MSGQ_MAX + VK_MSIX_NOTF_MAX)
+
+/* Number of bits set in DMA mask*/
+#define BCM_VK_DMA_BITS 64
+
+static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err;
+ int i;
+ int irq;
+ struct bcm_vk *vk;
+ struct device *dev = &pdev->dev;
+
+ vk = kzalloc(sizeof(*vk), GFP_KERNEL);
+ if (!vk)
+ return -ENOMEM;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(dev, "Cannot enable PCI device\n");
+ return err;
+ }
+ vk->pdev = pci_dev_get(pdev);
+
+ err = pci_request_regions(pdev, DRV_MODULE_NAME);
+ if (err) {
+ dev_err(dev, "Cannot obtain PCI resources\n");
+ goto err_disable_pdev;
+ }
+
+ /* make sure DMA is good */
+ err = dma_set_mask_and_coherent(&pdev->dev,
+ DMA_BIT_MASK(BCM_VK_DMA_BITS));
+ if (err) {
+ dev_err(dev, "failed to set DMA mask\n");
+ goto err_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+ pci_set_drvdata(pdev, vk);
+
+ irq = pci_alloc_irq_vectors(pdev,
+ 1,
+ VK_MSIX_IRQ_MAX,
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
+
+ if (irq < VK_MSIX_IRQ_MIN_REQ) {
+ dev_err(dev, "failed to get min %d MSIX interrupts, irq(%d)\n",
+ VK_MSIX_IRQ_MIN_REQ, irq);
+ err = (irq >= 0) ? -EINVAL : irq;
+ goto err_disable_pdev;
+ }
+
+ dev_info(dev, "Number of IRQs %d allocated - requested(%d).\n",
+ irq, VK_MSIX_IRQ_MAX);
+
+ for (i = 0; i < MAX_BAR; i++) {
+ /* multiple by 2 for 64 bit BAR mapping */
+ vk->bar[i] = pci_ioremap_bar(pdev, i * 2);
+ if (!vk->bar[i]) {
+ dev_err(dev, "failed to remap BAR%d\n", i);
+ goto err_iounmap;
+ }
+ }
+
+ return 0;
+
+err_iounmap:
+ for (i = 0; i < MAX_BAR; i++) {
+ if (vk->bar[i])
+ pci_iounmap(pdev, vk->bar[i]);
+ }
+ pci_release_regions(pdev);
+
+err_disable_pdev:
+ pci_free_irq_vectors(pdev);
+ pci_disable_device(pdev);
+ pci_dev_put(pdev);
+
+ return err;
+}
+
+static void bcm_vk_remove(struct pci_dev *pdev)
+{
+ int i;
+ struct bcm_vk *vk = pci_get_drvdata(pdev);
+
+ for (i = 0; i < MAX_BAR; i++) {
+ if (vk->bar[i])
+ pci_iounmap(pdev, vk->bar[i]);
+ }
+
+ pci_release_regions(pdev);
+ pci_free_irq_vectors(pdev);
+ pci_disable_device(pdev);
+}
+
+static const struct pci_device_id bcm_vk_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VALKYRIE), },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VIPER), },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, bcm_vk_ids);
+
+static struct pci_driver pci_driver = {
+ .name = DRV_MODULE_NAME,
+ .id_table = bcm_vk_ids,
+ .probe = bcm_vk_probe,
+ .remove = bcm_vk_remove,
+};
+module_pci_driver(pci_driver);
+
+MODULE_DESCRIPTION("Broadcom VK Host Driver");
+MODULE_AUTHOR("Scott Branden <scott.branden@broadcom.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("1.0");
--
2.17.1
\
 
 \ /
  Last update: 2020-09-29 02:13    [W:0.130 / U:10.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site