lkml.org 
[lkml]   [2020]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 2/3] iommu: Account for dma_mask and iommu aperture in IOVA reserved regions
Date
VFIO currently exposes the usable IOVA regions through the
VFIO_IOMMU_GET_INFO ioctl. However it fails to take into account
the dma_mask of the devices within the container. The top limit
currently is defined by the iommu aperture.

So, for instance, if the IOMMU supports up to 48bits, it may give
the impression the max IOVA is 48b while a device may have a
dma_mask of 42b. So this API cannot really be used to compute
the max usable IOVA.

This patch removes the IOVA region beyond the dma_mask's. As we
start to expose this reserved region in the sysfs file
/sys/kernel/iommu_groups/<n>/reserved_regions, we also need to
expose the IOVA range beyond the IOMMU aperture to handle the case
where the dma_mask would have a higher number of bits than the iommu
max input address. Those out-of-reach regions get the
IOMMU_RESV_RESERVED type.

This is a change to the ABI as this reserved region was not yet
exposed in sysfs /sys/kernel/iommu_groups/<n>/reserved_regions or
through the VFIO ioctl. Document that change.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
.../ABI/testing/sysfs-kernel-iommu_groups | 7 ++++
drivers/iommu/iommu.c | 39 +++++++++++++++++++
2 files changed, 46 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/Documentation/ABI/testing/sysfs-kernel-iommu_groups
index 017f5bc3920c..2f316686c88b 100644
--- a/Documentation/ABI/testing/sysfs-kernel-iommu_groups
+++ b/Documentation/ABI/testing/sysfs-kernel-iommu_groups
@@ -33,3 +33,10 @@ Description: In case an RMRR is used only by graphics or USB devices
it is now exposed as "direct-relaxable" instead of "direct".
In device assignment use case, for instance, those RMRR
are considered to be relaxable and safe.
+
+What: /sys/kernel/iommu_groups/reserved_regions
+Date: Sept 2020
+KernelVersion: v5.11
+Contact: Eric Auger <eric.auger@redhat.com>
+Description: Regions beyond the device dma_mask and the iommu aperture
+ now are exposed as IOMMU_RESV_RESERVED reserved regions.
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index dd8cda340e62..d797f07b3625 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -2511,9 +2511,48 @@ EXPORT_SYMBOL_GPL(iommu_domain_set_attr);
void iommu_get_resv_regions(struct device *dev, struct list_head *list)
{
const struct iommu_ops *ops = dev->bus->iommu_ops;
+ struct iommu_resv_region *region;
+ struct iommu_domain *domain;
+
+ domain = iommu_get_domain_for_dev(dev);
+
+ if (domain) {
+ struct iommu_domain_geometry geo;
+
+ if (iommu_domain_get_attr(domain, DOMAIN_ATTR_GEOMETRY, &geo))
+ return;
+
+ if (geo.aperture_end < ULLONG_MAX && geo.aperture_end != geo.aperture_start) {
+ region = iommu_alloc_resv_region(geo.aperture_end + 1,
+ ULLONG_MAX - geo.aperture_end,
+ 0, IOMMU_RESV_RESERVED);
+ if (!region)
+ return;
+ list_add_tail(&region->list, list);
+ }
+
+ if (geo.aperture_start > 0) {
+ region = iommu_alloc_resv_region(0, geo.aperture_start,
+ 0, IOMMU_RESV_RESERVED);
+ if (!region)
+ return;
+ list_add_tail(&region->list, list);
+ }
+ }

if (ops && ops->get_resv_regions)
ops->get_resv_regions(dev, list);
+
+ if (!dev->dma_mask || *dev->dma_mask == ULLONG_MAX)
+ return;
+
+ region = iommu_alloc_resv_region(*dev->dma_mask + 1,
+ ULLONG_MAX - *dev->dma_mask,
+ 0, IOMMU_RESV_RESERVED);
+ if (!region)
+ return;
+
+ list_add_tail(&region->list, list);
}

void iommu_put_resv_regions(struct device *dev, struct list_head *list)
--
2.21.3
\
 
 \ /
  Last update: 2020-09-28 21:51    [W:0.086 / U:8.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site