lkml.org 
[lkml]   [2020]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 support
Hi Marcel,

在 2020-09-26 00:08,Marcel Holtmann 写道:
> Hi Rocky,
>
>> This patch add support for WCN6855 i.e. patch and nvm download
>> support.
>
> please always include the content of /sys/kernel/debug/usb/devices for
> this hardware.
>
OK.

>>
>> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
>> ---
>> drivers/bluetooth/btusb.c | 66 +++++++++++++++++++++++++++++++--------
>> 1 file changed, 53 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index 9f294b941943..e888e4c02d69 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -59,6 +59,7 @@ static struct usb_driver btusb_driver;
>> #define BTUSB_MEDIATEK 0x200000
>> #define BTUSB_WIDEBAND_SPEECH 0x400000
>> #define BTUSB_VALID_LE_STATES 0x800000
>> +#define BTUSB_QCA_WCN6855 0x1000000
>>
>> static const struct usb_device_id btusb_table[] = {
>> /* Generic Bluetooth USB device */
>> @@ -291,6 +292,10 @@ static const struct usb_device_id
>> blacklist_table[] = {
>> { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME |
>> BTUSB_WIDEBAND_SPEECH },
>>
>> + /* QCA WCN6855 chipset */
>> + { USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 |
>> + BTUSB_WIDEBAND_SPEECH },
>> +
>> /* Broadcom BCM2035 */
>> { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
>> { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
>> @@ -3409,6 +3414,27 @@ static int btusb_set_bdaddr_ath3012(struct
>> hci_dev *hdev,
>> return 0;
>> }
>>
>> +static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
>> + const bdaddr_t *bdaddr)
>> +{
>> + struct sk_buff *skb;
>> + u8 buf[6];
>> + long ret;
>> +
>> + memcpy(buf, bdaddr, sizeof(bdaddr_t));
>> +
>> + skb = __hci_cmd_sync_ev(hdev, 0xfc14, sizeof(buf), buf,
>> + HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
>> + if (IS_ERR(skb)) {
>> + ret = PTR_ERR(skb);
>> + bt_dev_err(hdev, "Change address command failed (%ld)", ret);
>> + return ret;
>> + }
>> + kfree_skb(skb);
>> +
>> + return 0;
>> +}
>> +
>> #define QCA_DFU_PACKET_LEN 4096
>>
>> #define QCA_GET_TARGET_VERSION 0x09
>> @@ -3428,7 +3454,8 @@ struct qca_version {
>> } __packed;
>>
>> struct qca_rampatch_version {
>> - __le16 rom_version;
>> + __le16 rom_version_high;
>> + __le16 rom_version_low;
>> __le16 patch_version;
>> } __packed;
>
> How does this work. The struct now has an extra 16-bit in the middle.
> Is this backwards compatible?
>
It works with old HW by shift the offset byte in qca_devices_table, from
18 to 16.
So for old HW only rom_version_low is being used and it still points to
the correct
bytes.

>>
>> @@ -3440,12 +3467,14 @@ struct qca_device_info {
>> };
>>
>> static const struct qca_device_info qca_devices_table[] = {
>> - { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
>> - { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
>> - { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
>> - { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
>> - { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
>> - { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
>> + { 0x00000100, 20, 4, 8 }, /* Rome 1.0 */
>> + { 0x00000101, 20, 4, 8 }, /* Rome 1.1 */
>
> Align it with 8 }
>
OK.

>> + { 0x00000200, 28, 4, 16 }, /* Rome 2.0 */
>> + { 0x00000201, 28, 4, 16 }, /* Rome 2.1 */
>> + { 0x00000300, 28, 4, 16 }, /* Rome 3.0 */
>> + { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
>> + { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
>> + { 0x00130200, 40, 4, 16 } /* WCN6855 2.0 */
>
> And the last one should also be },
>
OK.

>> };
>>
>> static int btusb_qca_send_vendor_req(struct usb_device *udev, u8
>> request,
>> @@ -3547,8 +3576,8 @@ static int btusb_setup_qca_load_rampatch(struct
>> hci_dev *hdev,
>> {
>> struct qca_rampatch_version *rver;
>> const struct firmware *fw;
>> - u32 ver_rom, ver_patch;
>> - u16 rver_rom, rver_patch;
>> + u32 ver_rom, ver_patch, rver_rom;
>> + u16 rver_rom_low, rver_rom_high, rver_patch;
>> char fwname[64];
>> int err;
>>
>> @@ -3567,9 +3596,16 @@ static int btusb_setup_qca_load_rampatch(struct
>> hci_dev *hdev,
>> bt_dev_info(hdev, "using rampatch file: %s", fwname);
>>
>> rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
>> - rver_rom = le16_to_cpu(rver->rom_version);
>> + rver_rom_low = le16_to_cpu(rver->rom_version_low);
>> rver_patch = le16_to_cpu(rver->patch_version);
>>
>> + if (ver_rom & ~0xffffU) {
>> + rver_rom_high = le16_to_cpu(rver->rom_version_high);
>> + rver_rom = le32_to_cpu(rver_rom_high << 16 | rver_rom_low);
>> + } else {
>> + rver_rom = rver_rom_low;
>> + }
>> +
>> bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, "
>> "firmware rome 0x%x build 0x%x",
>> rver_rom, rver_patch, ver_rom, ver_patch);
>> @@ -3643,9 +3679,6 @@ static int btusb_setup_qca(struct hci_dev *hdev)
>> return err;
>>
>> ver_rom = le32_to_cpu(ver.rom_version);
>> - /* Don't care about high ROM versions */
>> - if (ver_rom & ~0xffffU)
>> - return 0;
>>
>> for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
>> if (ver_rom == qca_devices_table[i].rom_version)
>> @@ -4081,6 +4114,13 @@ static int btusb_probe(struct usb_interface
>> *intf,
>> btusb_check_needs_reset_resume(intf);
>> }
>>
>> + if (id->driver_info & BTUSB_QCA_WCN6855) {
>> + data->setup_on_usb = btusb_setup_qca;
>> + hdev->set_bdaddr = btusb_set_bdaddr_wcn6855;
>> + hdev->cmd_timeout = btusb_qca_cmd_timeout;
>> + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>> + }
>> +
>> if (id->driver_info & BTUSB_AMP) {
>> /* AMP controllers do not support SCO packets */
>> data->isoc = NULL;
>
> Regards
>
> Marcel

\
 
 \ /
  Last update: 2020-09-28 04:12    [W:1.414 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site