lkml.org 
[lkml]   [2020]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/7] Pine64 PineCube support
Hi,

On Wed, Sep 23, 2020 at 08:57:02AM +0800, Icenowy Zheng wrote:
> Pine64 PineCube is an IP camera based on Allwinner S3 chip.
>
> This patchset tries to add support for it.
>
> In order to make sure the system do not hang when camera is brought up,
> a fix to AXP209 driver is needed (sent individually), otherwise the
> system will hang because it changes the voltage of LDO2 when LDO4
> tweaking.

Queued all the patches for 5.11

> Icenowy Zheng (7):
> ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
> ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
> ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
> ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
> ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
> dt-bindings: arm: sunxi: add Pine64 PineCube binding
> ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera

However, I guess for the next patches to the v3s DTSI we should just
have a simpler prefix (like v3), it's really taking a lot of characters
here :)

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-09-25 17:13    [W:0.073 / U:25.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site