lkml.org 
[lkml]   [2020]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/4] drm/etnaviv: add total hi bandwidth perfcounter
On Fr, 2020-08-14 at 11:05 +0200, Christian Gmeiner wrote:
> These two perf counters represent the total read and write
> GPU bandwidth in terms of 64bits.
>
> The used sequence was taken from Vivante kernel driver.
>
> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
> ---
> drivers/gpu/drm/etnaviv/etnaviv_perfmon.c | 35 ++++++++++++++++++++++-
> 1 file changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c b/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
> index 782732e6ce72..b37459f022d7 100644
> --- a/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
> +++ b/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
> @@ -69,6 +69,29 @@ static u32 pipe_perf_reg_read(struct etnaviv_gpu *gpu,
> return value;
> }
>
> +static u32 pipe_reg_read(struct etnaviv_gpu *gpu,
> + const struct etnaviv_pm_domain *domain,
> + const struct etnaviv_pm_signal *signal)
> +{
> + u32 clock = gpu_read(gpu, VIVS_HI_CLOCK_CONTROL);
> + u32 value = 0;
> + unsigned i;
> +
> + for (i = 0; i < gpu->identity.pixel_pipes; i++) {
> + clock &= ~(VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE__MASK);
> + clock |= VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE(i);
> + gpu_write(gpu, VIVS_HI_CLOCK_CONTROL, clock);
> + value += gpu_read(gpu, signal->data);
> + }
> +
> + /* switch back to pixel pipe 0 to prevent GPU hang */
> + clock &= ~(VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE__MASK);
> + clock |= VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE(0);
> + gpu_write(gpu, VIVS_HI_CLOCK_CONTROL, clock);
> +
> + return value;
> +}
> +
> static u32 hi_total_cycle_read(struct etnaviv_gpu *gpu,
> const struct etnaviv_pm_domain *domain,
> const struct etnaviv_pm_signal *signal)
> @@ -102,8 +125,18 @@ static const struct etnaviv_pm_domain doms_3d[] = {
> .name = "HI",
> .profile_read = VIVS_MC_PROFILE_HI_READ,
> .profile_config = VIVS_MC_PROFILE_CONFIG2,
> - .nr_signals = 5,
> + .nr_signals = 7,

I've tripped across this part. It's something I don't particularly
like, as this value has a risk of getting inconsistent with the actual
array. Maybe we could split out signal array from this initialization,
so we could then use the ARRAY_SIZE macro to initialize this value?

But that's not really related to this patch and can be done in a
follow-up cleanup.

Regards,
Lucas

> .signal = (const struct etnaviv_pm_signal[]) {
> + {
> + "TOTAL_READ_BYTES8",
> + VIVS_HI_PROFILE_READ_BYTES8,
> + &pipe_reg_read,
> + },
> + {
> + "TOTAL_WRITE_BYTES8",
> + VIVS_HI_PROFILE_WRITE_BYTES8,
> + &pipe_reg_read,
> + },
> {
> "TOTAL_CYCLES",
> 0,

\
 
 \ /
  Last update: 2020-09-25 12:09    [W:0.086 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site