lkml.org 
[lkml]   [2020]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/1] PCI/ERR: Fix reset logic in pcie_do_recovery() call
From
Date
On 9/24/2020 12:06 AM, Kuppuswamy, Sathyanarayanan wrote:
> For problem description, please check the following details
>
> Current pcie_do_recovery() implementation has following two issues:
>
> 1. Fatal (DPC) error recovery is currently broken for non-hotplug
> capable devices. Current fatal error recovery implementation relies
> on PCIe hotplug (pciehp) handler for detaching and re-enumerating
> the affected devices/drivers. pciehp handler listens for DLLSC state
> changes and handles device/driver detachment on DLLSC_LINK_DOWN event
> and re-enumeration on DLLSC_LINK_UP event. So when dealing with
> non-hotplug capable devices, recovery code does not restore the state
> of the affected devices correctly. Correct implementation should
> restore the device state and call report_slot_reset() function after
> resetting the link to restore the state of the device/driver.
>

So, this is a matter of moving the save/restore logic from the hotplug
driver into common code so that DPC slot reset takes advantage of it?

If that's direction we are going, this is fine change IMO.

> You can find fatal non-hotplug related issues reported in following links:
>
> https://lore.kernel.org/linux-pci/20200527083130.4137-1-Zhiqiang.Hou@nxp.com/
>
> https://lore.kernel.org/linux-pci/12115.1588207324@famine/
> https://lore.kernel.org/linux-pci/0e6f89cd6b9e4a72293cc90fafe93487d7c2d295.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com/
>
>
> 2. For non-fatal errors if report_error_detected() or
> report_mmio_enabled() functions requests PCI_ERS_RESULT_NEED_RESET then
> current pcie_do_recovery() implementation does not do the requested
> explicit device reset, instead just calls the report_slot_reset() on all
> affected devices. Notifying about the reset via report_slot_reset()
> without doing the actual device reset is incorrect.
>

This makes sens too. There seems to be an ordering issue per your
description.

> To fix above issues, use PCI_ERS_RESULT_NEED_RESET as error state after
> successful reset_link() operation. This will ensure ->slot_reset() be
> called after reset_link() operation for fatal errors.

You lost me here. Why do we want to do secondary bus reset on top of
DPC reset?

> Also call
> pci_bus_reset() to do slot/bus reset() before triggering device specific
> ->slot_reset() callback. Also, using pci_bus_reset() will restore the state
> of the devices after performing the reset operation.
>
> Even though using pci_bus_reset() will do redundant reset operation after
> ->reset_link() for fatal errors, it should should affect the functional
> behavior.

\
 
 \ /
  Last update: 2020-09-24 22:53    [W:0.138 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site