lkml.org 
[lkml]   [2020]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: marvell: espressobin: Simplify v7 ethernet port labeling
Date
Hi Andre,

> Now that the switch ports have a label in the .dtsi, simplify the whole
> "switch0" block for the v7 dts files.
>
> Signed-off-by: Andre Heider <a.heider@gmail.com>

Applied on mvebu/dt64

Thanks,

Gregory

> ---
>
> This goes on top of Pali's patch:
> "arm64: dts: marvell: espressobin: Add ethernet switch aliases"
>
> The resulting .dtb files are the same.
>
> .../armada-3720-espressobin-v7-emmc.dts | 18 +++++-------------
> .../dts/marvell/armada-3720-espressobin-v7.dts | 18 +++++-------------
> 2 files changed, 10 insertions(+), 26 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> index 215d2f702623..61d49d6a2a2a 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> @@ -28,20 +28,12 @@ aliases {
> };
> };
>
> -&switch0 {
> - ports {
> - switch0port1: port@1 {
> - reg = <1>;
> - label = "lan1";
> - phy-handle = <&switch0phy0>;
> - };
> +&switch0port1 {
> + label = "lan1";
> +};
>
> - switch0port3: port@3 {
> - reg = <3>;
> - label = "wan";
> - phy-handle = <&switch0phy2>;
> - };
> - };
> +&switch0port3 {
> + label = "wan";
> };
>
> /* U11 */
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> index b6f4af8ebafb..44dbe9a21cc7 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> @@ -27,18 +27,10 @@ aliases {
> };
> };
>
> -&switch0 {
> - ports {
> - switch0port1: port@1 {
> - reg = <1>;
> - label = "lan1";
> - phy-handle = <&switch0phy0>;
> - };
> +&switch0port1 {
> + label = "lan1";
> +};
>
> - switch0port3: port@3 {
> - reg = <3>;
> - label = "wan";
> - phy-handle = <&switch0phy2>;
> - };
> - };
> +&switch0port3 {
> + label = "wan";
> };
> --
> 2.28.0
>

--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

\
 
 \ /
  Last update: 2020-09-23 17:03    [W:0.079 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site