lkml.org 
[lkml]   [2020]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: marvell: espressobin: Add ethernet switch aliases
Date
Hello Pali,

> Espressobin boards have 3 ethernet ports and some of them got assigned more
> then one MAC address. MAC addresses are stored in U-Boot environment.
>
> Since commit a2c7023f7075c ("net: dsa: read mac address from DT for slave
> device") kernel can use MAC addresses from DT for particular DSA port.
>
> Currently Espressobin DTS file contains alias just for ethernet0.
>
> This patch defines additional ethernet aliases in Espressobin DTS files, so
> bootloader can fill correct MAC address for DSA switch ports if more MAC
> addresses were specified.
>
> DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3
> are used for lan ports for both Espressobin revisions (V5 and V7).
>
> Fixes: 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias")
> Signed-off-by: Pali Rohár <pali@kernel.org>


Applied on mvebu/fixes

Thanks,

Gregory

> ---
> .../dts/marvell/armada-3720-espressobin-v7-emmc.dts | 10 ++++++++--
> .../boot/dts/marvell/armada-3720-espressobin-v7.dts | 10 ++++++++--
> .../boot/dts/marvell/armada-3720-espressobin.dtsi | 12 ++++++++----
> 3 files changed, 24 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> index 03733fd92732..215d2f702623 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> @@ -20,17 +20,23 @@
> compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
> "globalscale,espressobin", "marvell,armada3720",
> "marvell,armada3710";
> +
> + aliases {
> + /* ethernet1 is wan port */
> + ethernet1 = &switch0port3;
> + ethernet3 = &switch0port1;
> + };
> };
>
> &switch0 {
> ports {
> - port@1 {
> + switch0port1: port@1 {
> reg = <1>;
> label = "lan1";
> phy-handle = <&switch0phy0>;
> };
>
> - port@3 {
> + switch0port3: port@3 {
> reg = <3>;
> label = "wan";
> phy-handle = <&switch0phy2>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> index 8570c5f47d7d..b6f4af8ebafb 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> @@ -19,17 +19,23 @@
> model = "Globalscale Marvell ESPRESSOBin Board V7";
> compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
> "marvell,armada3720", "marvell,armada3710";
> +
> + aliases {
> + /* ethernet1 is wan port */
> + ethernet1 = &switch0port3;
> + ethernet3 = &switch0port1;
> + };
> };
>
> &switch0 {
> ports {
> - port@1 {
> + switch0port1: port@1 {
> reg = <1>;
> label = "lan1";
> phy-handle = <&switch0phy0>;
> };
>
> - port@3 {
> + switch0port3: port@3 {
> reg = <3>;
> label = "wan";
> phy-handle = <&switch0phy2>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
> index b97218c72727..0775c16e0ec8 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
> @@ -13,6 +13,10 @@
> / {
> aliases {
> ethernet0 = &eth0;
> + /* for dsa slave device */
> + ethernet1 = &switch0port1;
> + ethernet2 = &switch0port2;
> + ethernet3 = &switch0port3;
> serial0 = &uart0;
> serial1 = &uart1;
> };
> @@ -120,7 +124,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> - port@0 {
> + switch0port0: port@0 {
> reg = <0>;
> label = "cpu";
> ethernet = <&eth0>;
> @@ -131,19 +135,19 @@
> };
> };
>
> - port@1 {
> + switch0port1: port@1 {
> reg = <1>;
> label = "wan";
> phy-handle = <&switch0phy0>;
> };
>
> - port@2 {
> + switch0port2: port@2 {
> reg = <2>;
> label = "lan0";
> phy-handle = <&switch0phy1>;
> };
>
> - port@3 {
> + switch0port3: port@3 {
> reg = <3>;
> label = "lan1";
> phy-handle = <&switch0phy2>;
> --
> 2.20.1
>

--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

\
 
 \ /
  Last update: 2020-09-23 17:03    [W:0.170 / U:1.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site