lkml.org 
[lkml]   [2020]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 14/15] ARM: dts: armada: align GPIO hog names with dtschema
Date
Hi Krzysztof,

> The convention for node names is to use hyphens, not underscores.
> dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.


Applied on mvebu/dt

Thanks,

Gregory

>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm/boot/dts/armada-388-clearfog.dts | 4 ++--
> arch/arm/boot/dts/armada-388-clearfog.dtsi | 10 +++++-----
> arch/arm/boot/dts/armada-388-helios4.dts | 6 +++---
> 3 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
> index 20f8d4667753..4140a5303b48 100644
> --- a/arch/arm/boot/dts/armada-388-clearfog.dts
> +++ b/arch/arm/boot/dts/armada-388-clearfog.dts
> @@ -73,13 +73,13 @@
> * 14-SFP_TX_DISABLE
> * 15-SFP_MOD_DEF0
> */
> - pcie2_0_clkreq {
> + pcie2-0-clkreq-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_LOW>;
> input;
> line-name = "pcie2.0-clkreq";
> };
> - pcie2_0_w_disable {
> + pcie2-0-w-disable-hog {
> gpio-hog;
> gpios = <7 GPIO_ACTIVE_LOW>;
> output-low;
> diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
> index a0aa1d188f0c..f8a06ae4a3c9 100644
> --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
> +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
> @@ -141,31 +141,31 @@
> #gpio-cells = <2>;
> reg = <0x20>;
>
> - pcie1_0_clkreq {
> + pcie1-0-clkreq-hog {
> gpio-hog;
> gpios = <0 GPIO_ACTIVE_LOW>;
> input;
> line-name = "pcie1.0-clkreq";
> };
> - pcie1_0_w_disable {
> + pcie1-0-w-disable-hog {
> gpio-hog;
> gpios = <3 GPIO_ACTIVE_LOW>;
> output-low;
> line-name = "pcie1.0-w-disable";
> };
> - usb3_ilimit {
> + usb3-ilimit-hog {
> gpio-hog;
> gpios = <5 GPIO_ACTIVE_LOW>;
> input;
> line-name = "usb3-current-limit";
> };
> - usb3_power {
> + usb3-power-hog {
> gpio-hog;
> gpios = <6 GPIO_ACTIVE_HIGH>;
> output-high;
> line-name = "usb3-power";
> };
> - m2_devslp {
> + m2-devslp-hog {
> gpio-hog;
> gpios = <11 GPIO_ACTIVE_HIGH>;
> output-low;
> diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
> index fb49df2a3bce..b3728de3bd3f 100644
> --- a/arch/arm/boot/dts/armada-388-helios4.dts
> +++ b/arch/arm/boot/dts/armada-388-helios4.dts
> @@ -166,19 +166,19 @@
> interrupt-controller;
> #interrupt-cells = <2>;
>
> - board_rev_bit_0 {
> + board-rev-bit-0-hog {
> gpio-hog;
> gpios = <0 GPIO_ACTIVE_LOW>;
> input;
> line-name = "board-rev-0";
> };
> - board_rev_bit_1 {
> + board-rev-bit-1-hog {
> gpio-hog;
> gpios = <1 GPIO_ACTIVE_LOW>;
> input;
> line-name = "board-rev-1";
> };
> - usb3_ilimit {
> + usb3-ilimit-hog {
> gpio-hog;
> gpios = <5 GPIO_ACTIVE_HIGH>;
> input;
> --
> 2.17.1
>

--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

\
 
 \ /
  Last update: 2020-09-23 16:41    [W:0.182 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site