lkml.org 
[lkml]   [2020]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 03/11] drivers/base: convert deferred_trigger_count and probe_count to counter_atomic
On Tue, Sep 22, 2020 at 07:43:32PM -0600, Shuah Khan wrote:
> counter_atomic is introduced to be used when a variable is used as
> a simple counter and doesn't guard object lifetimes. This clearly
> differentiates atomic_t usages that guard object lifetimes.
>
> counter_atomic variables will wrap around to 0 when it overflows and
> should not be used to guard resource lifetimes, device usage and
> open counts that control state changes, and pm states.
>
> deferred_trigger_count gets incremented and read. It doesn't guard
> object lifetimes, device usage counts, device open counts, and pm
> states. There is very little chance of this counter overflowing.
> Convert it to use counter_atomic.
>
> This conversion doesn't change the oveflow wrap around behavior.
>
> probe_count gets incremented, decremented, read. It doesn't guard
> object lifetimes, device usage counts, device open counts, and pm
> states. There is very little chance of this counter overflowing.
> This counter controls the wait for known devices to complete their
> probing, and probe_count == 0 ends the wait. Other than that it
> meets the other criteria to be converted. Convert it to use
> counter_atomic.
>
> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
> ---
> drivers/base/dd.c | 19 ++++++++++---------
> 1 file changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/base/dd.c b/drivers/base/dd.c
> index 857b0a928e8d..f49fe45960ac 100644
> --- a/drivers/base/dd.c
> +++ b/drivers/base/dd.c
> @@ -28,6 +28,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/pinctrl/devinfo.h>
> #include <linux/slab.h>
> +#include <linux/counters.h>
>
> #include "base.h"
> #include "power/power.h"
> @@ -54,7 +55,7 @@
> static DEFINE_MUTEX(deferred_probe_mutex);
> static LIST_HEAD(deferred_probe_pending_list);
> static LIST_HEAD(deferred_probe_active_list);
> -static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
> +static struct counter_atomic deferred_trigger_count = COUNTER_ATOMIC_INIT(0);
> static struct dentry *deferred_devices;
> static bool initcalls_done;
>
> @@ -173,7 +174,7 @@ static void driver_deferred_probe_trigger(void)
> * into the active list so they can be retried by the workqueue
> */
> mutex_lock(&deferred_probe_mutex);
> - atomic_inc(&deferred_trigger_count);
> + counter_atomic_inc(&deferred_trigger_count);
> list_splice_tail_init(&deferred_probe_pending_list,
> &deferred_probe_active_list);
> mutex_unlock(&deferred_probe_mutex);
> @@ -466,7 +467,7 @@ int device_bind_driver(struct device *dev)
> }
> EXPORT_SYMBOL_GPL(device_bind_driver);
>
> -static atomic_t probe_count = ATOMIC_INIT(0);
> +static struct counter_atomic probe_count = COUNTER_ATOMIC_INIT(0);
> static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);
>
> static void driver_deferred_probe_add_trigger(struct device *dev,
> @@ -474,7 +475,7 @@ static void driver_deferred_probe_add_trigger(struct device *dev,
> {
> driver_deferred_probe_add(dev);
> /* Did a trigger occur while probing? Need to re-trigger if yes */
> - if (local_trigger_count != atomic_read(&deferred_trigger_count))
> + if (local_trigger_count != counter_atomic_read(&deferred_trigger_count))
> driver_deferred_probe_trigger();
> }
>
> @@ -493,7 +494,7 @@ static DEVICE_ATTR_RO(state_synced);
> static int really_probe(struct device *dev, struct device_driver *drv)
> {
> int ret = -EPROBE_DEFER;
> - int local_trigger_count = atomic_read(&deferred_trigger_count);
> + int local_trigger_count = counter_atomic_read(&deferred_trigger_count);
> bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) &&
> !drv->suppress_bind_attrs;
>
> @@ -514,7 +515,7 @@ static int really_probe(struct device *dev, struct device_driver *drv)
> if (ret)
> return ret;
>
> - atomic_inc(&probe_count);
> + counter_atomic_inc(&probe_count);
> pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
> drv->bus->name, __func__, drv->name, dev_name(dev));
> if (!list_empty(&dev->devres_head)) {
> @@ -648,7 +649,7 @@ static int really_probe(struct device *dev, struct device_driver *drv)
> */
> ret = 0;
> done:
> - atomic_dec(&probe_count);
> + counter_atomic_dec(&probe_count);
> wake_up_all(&probe_waitqueue);
> return ret;
> }
> @@ -678,7 +679,7 @@ static int really_probe_debug(struct device *dev, struct device_driver *drv)
> */
> int driver_probe_done(void)
> {
> - int local_probe_count = atomic_read(&probe_count);
> + int local_probe_count = counter_atomic_read(&probe_count);
>
> pr_debug("%s: probe_count = %d\n", __func__, local_probe_count);
> if (local_probe_count)
> @@ -699,7 +700,7 @@ void wait_for_device_probe(void)
> flush_work(&deferred_probe_work);
>
> /* wait for the known devices to complete their probing */
> - wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
> + wait_event(probe_waitqueue, counter_atomic_read(&probe_count) == 0);
> async_synchronize_full();
> }
> EXPORT_SYMBOL_GPL(wait_for_device_probe);
> --
> 2.25.1
>

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

\
 
 \ /
  Last update: 2020-09-23 12:30    [W:0.213 / U:1.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site