lkml.org 
[lkml]   [2020]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 net] net: stmmac: removed enabling eee in EEE set callback
Acked-by: Mark Gross <mgross@linux.intel.com>

On Wed, Sep 23, 2020 at 04:56:14PM +0800, Voon Weifeng wrote:
> EEE should be only be enabled during stmmac_mac_link_up() when the
> link are up and being set up properly. set_eee should only do settings
> configuration and disabling the eee.
>
> Without this fix, turning on EEE using ethtool will return
> "Operation not supported". This is due to the driver is in a dead loop
> waiting for eee to be advertised in the for eee to be activated but the
> driver will only configure the EEE advertisement after the eee is
> activated.
>
> Ethtool should only return "Operation not supported" if there is no EEE
> capbility in the MAC controller.
>
> Fixes: 8a7493e58ad6 ("net: stmmac: Fix a race in EEE enable callback")
>
> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
> ---
> .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 15 ++++-----------
> 1 file changed, 4 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
> index ac5e8cc5fb9f..430a4b32ec1e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
> @@ -675,23 +675,16 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev,
> struct stmmac_priv *priv = netdev_priv(dev);
> int ret;
>
> - if (!edata->eee_enabled) {
> + if (!priv->dma_cap.eee)
> + return -EOPNOTSUPP;
> +
> + if (!edata->eee_enabled)
> stmmac_disable_eee_mode(priv);
> - } else {
> - /* We are asking for enabling the EEE but it is safe
> - * to verify all by invoking the eee_init function.
> - * In case of failure it will return an error.
> - */
> - edata->eee_enabled = stmmac_eee_init(priv);
> - if (!edata->eee_enabled)
> - return -EOPNOTSUPP;
> - }
>
> ret = phylink_ethtool_set_eee(priv->phylink, edata);
> if (ret)
> return ret;
>
> - priv->eee_enabled = edata->eee_enabled;
> priv->tx_lpi_timer = edata->tx_lpi_timer;
> return 0;
> }
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-09-24 01:38    [W:0.062 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site