lkml.org 
[lkml]   [2020]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next v3 0/2] net: dsa: b53: Configure VLANs while not filtering
Date
Hi David, Jakub,

These two patches allow the b53 driver which always configures its CPU
port as egress tagged to behave correctly with VLANs being always
configured whenever a port is added to a bridge.

Vladimir provides a patch that aligns the bridge with vlan_filtering=0
receive path to behave the same as vlan_filtering=1. Per discussion with
Nikolay, this behavior is deemed to be too DSA specific to be done in
the bridge proper.

This is a preliminary series for Vladimir to make
configure_vlan_while_filtering the default behavior for all DSA drivers
in the future.

Thanks!

Changes in v3:

- added Vladimir's Acked-by tag to patch #2
- removed unnecessary if_vlan.h inclusion in patch #2
- reworded commit message to be accurate with the code changes

Changes in v2:

- moved the call to dsa_untag_bridge_pvid() into net/dsa/tag_brcm.c
since we have a single user for now

Florian Fainelli (1):
net: dsa: b53: Configure VLANs while not filtering

Vladimir Oltean (1):
net: dsa: untag the bridge pvid from rx skbs

drivers/net/dsa/b53/b53_common.c | 19 +--------
drivers/net/dsa/b53/b53_priv.h | 1 -
net/dsa/dsa_priv.h | 66 ++++++++++++++++++++++++++++++++
net/dsa/tag_brcm.c | 15 +++++++-
4 files changed, 81 insertions(+), 20 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2020-09-23 23:41    [W:0.424 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site