lkml.org 
[lkml]   [2020]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] arm64: TI K3 DT updates for v5.10
Hi,

Please pull the following for 5.10 cycle (had to base on 5.9-rc3 due to
a bad dependency):
- dts fixups for dtbs_check and W=2 build of dtbs, node names.
- am654 adds crypto nodes and an erratum workaround for PCIe(down to Gen2)
- j721e adds C66, C71 DSP and PCIe nodes

The following changes since commit f75aef392f869018f78cfedf3c320a6b3fcfda6b:

Linux 5.9-rc3 (2020-08-30 16:01:54 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git tags/ti-k3-dt-for-v5.10

for you to fetch changes up to 66db854b1f62dbee48ec7373f149fa30e4b3dd4e:

arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances (2020-09-22 08:19:47 -0500)

----------------------------------------------------------------
Device tree updates towards 5.10-rc1 for TI K3 platform.

----------------------------------------------------------------
Keerthy (2):
arm64: dts: ti: k3-am6: Add crypto accelarator node
arm64: dts: ti: k3-j721e-main: Add crypto accelerator node

Kishon Vijay Abraham I (2):
arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes
arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances

Nishanth Menon (8):
arm64: dts: ti: k3-j721e: Use lower case hexadecimal
arm64: dts: ti: k3-am65-main: Use lower case hexadecimal
arm64: dts: ti: k3-am65*: Use generic gpio for node names
arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names
arm64: dts: ti: k3-*: Use generic pinctrl for node names
arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640
arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name
arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings

Sekhar Nori (1):
arm64: dts: ti: k3-am65: restrict PCIe to Gen2 speed

Suman Anna (10):
arm64: dts: ti: k3-am65: Fix interconnect node names
arm64: dts: ti: k3-j721e: Fix interconnect node names
arm64: dts: ti: k3-j721e-som-p0: Move mailbox nodes from board dts file
arm64: dts: ti: k3-j721e-main: Add C66x DSP nodes
arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C66x DSPs
arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66 DSPs
arm64: dts: ti: k3-j721e-main: Add C71x DSP node
arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C71x DSP
arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C71x DSP
arm64: dts: ti: k3-j721e-som-p0: Reserve memory for IPC between RTOS cores

arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 52 +++-
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 +-
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-am65.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 18 +-
.../boot/dts/ti/k3-am654-industrial-thermal.dtsi | 12 +-
.../boot/dts/ti/k3-j721e-common-proc-board.dts | 191 ++++++-------
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 301 ++++++++++++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 +-
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 155 ++++++++++-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 11 +-
11 files changed, 608 insertions(+), 152 deletions(-)

--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-09-22 15:48    [W:0.025 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site