lkml.org 
[lkml]   [2020]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net-next] net: dsa: felix: convert TAS link speed based on phylink speed
Date
state->speed holds a value of 10, 100, 1000 or 2500, but
QSYS_TAG_CONFIG_LINK_SPEED expects a value of 0, 1, 2, 3. So convert the
speed to a proper value.

Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via
taprio offload")

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
drivers/net/dsa/ocelot/felix_vsc9959.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 79ddc4ba27a3..f584eababd0a 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -973,8 +973,28 @@ static void vsc9959_mdio_bus_free(struct ocelot *ocelot)
static void vsc9959_sched_speed_set(struct ocelot *ocelot, int port,
u32 speed)
{
+ u8 tas_speed;
+
+ switch (speed) {
+ case SPEED_10:
+ tas_speed = OCELOT_SPEED_10;
+ break;
+ case SPEED_100:
+ tas_speed = OCELOT_SPEED_100;
+ break;
+ case SPEED_1000:
+ tas_speed = OCELOT_SPEED_1000;
+ break;
+ case SPEED_2500:
+ tas_speed = OCELOT_SPEED_2500;
+ break;
+ default:
+ tas_speed = OCELOT_SPEED_1000;
+ break;
+ }
+
ocelot_rmw_rix(ocelot,
- QSYS_TAG_CONFIG_LINK_SPEED(speed),
+ QSYS_TAG_CONFIG_LINK_SPEED(tas_speed),
QSYS_TAG_CONFIG_LINK_SPEED_M,
QSYS_TAG_CONFIG, port);
}
--
2.17.1
\
 
 \ /
  Last update: 2020-09-22 12:59    [W:0.035 / U:12.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site