lkml.org 
[lkml]   [2020]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] dt-bindings: phy: convert phy-mtk-tphy.txt to YAML schema
Date
Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../bindings/phy/mediatek,tphy.yaml | 260 ++++++++++++++++++
.../devicetree/bindings/phy/phy-mtk-tphy.txt | 162 -----------
2 files changed, 260 insertions(+), 162 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt

diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
new file mode 100644
index 000000000000..eec75d13ca42
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek T-PHY Controller Device Tree Bindings
+
+maintainers:
+ - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+ The T-phy controller supports physical layer functionality for a number of
+ controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
+
+properties:
+ $nodename:
+ pattern: "^t-phy@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-tphy
+ - enum:
+ - mediatek,generic-tphy-v1
+ - items:
+ - enum:
+ - mediatek,mt2712-tphy
+ - enum:
+ - mediatek,generic-tphy-v2
+ - items:
+ - enum:
+ - mediatek,mt8173-u3phy
+ - items:
+ - const: mediatek,generic-tphy-v1
+ - const: mediatek,generic-tphy-v2
+ - const: mediatek,mt8173-u3phy
+
+ reg:
+ description: |
+ Register shared by multiple ports, exclude port's private register.
+ It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
+ T-PHY V2, such as mt2712.
+ maxItems: 1
+
+ "#address-cells":
+ enum: [1, 2]
+
+ "#size-cells":
+ enum: [1, 2]
+
+ # Used with non-empty value if optional 'reg' is not provided.
+ # The format of the value is an arbitrary number of triplets of
+ # (child-bus-address, parent-bus-address, length).
+ ranges: true
+
+ mediatek,src-ref-clk-mhz:
+ description:
+ Frequency of reference clock for slew rate calibrate
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 26
+
+ mediatek,src-coef:
+ description:
+ Coefficient for slew rate calibrate, depends on SoC process
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 28
+
+# Required child node:
+patternProperties:
+ "^usb-phy@[0-9a-f]+$":
+ type: object
+ description: |
+ A sub-node is required for each port the controller provides.
+ Address range information including the usual 'reg' property
+ is used inside these nodes to describe the controller's topology.
+
+ properties:
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+ - description: Reference clock of analog phy, used if the clocks
+ of analog and digital phys are separated, otherwise uses
+ "ref" clock only if needed.
+
+ clock-names:
+ items:
+ - const: ref
+ - const: da_ref
+
+ "#phy-cells":
+ const: 1
+ description: |
+ The cells contain the following arguments.
+
+ - description: The PHY type
+ enum:
+ - PHY_TYPE_USB2
+ - PHY_TYPE_USB3
+ - PHY_TYPE_PCIE
+ - PHY_TYPE_SATA
+
+ #The following optional vendor properties are only for debug or HQA test
+ mediatek,eye-src:
+ description:
+ The value of slew rate calibrate (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 7
+
+ mediatek,eye-vrt:
+ description:
+ The selection of VRT reference voltage (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 7
+
+ mediatek,eye-term:
+ description:
+ The selection of HS_TX TERM reference voltage (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 7
+
+ mediatek,intr:
+ description:
+ The selection of internal resistor (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 31
+
+ mediatek,discth:
+ description:
+ The selection of disconnect threshold (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 15
+
+ mediatek,bc12:
+ description:
+ Specify the flag to enable BC1.2 if support it
+ type: boolean
+
+ required:
+ - reg
+ - clocks
+ - clock-names
+ - "#phy-cells"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/phy/phy.h>
+ susb: usb@11271000 {
+ compatible = "mediatek,mt8173-mtu3";
+ reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+ reg-names = "mac", "ippc";
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ u3phy: t-phy@11290000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0x11290000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "okay";
+
+ u2port0: usb-phy@11290800 {
+ reg = <0x11290800 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port0: usb-phy@11290900 {
+ reg = <0x11290900 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u2port1: usb-phy@11291000 {
+ reg = <0x11291000 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+#Layout differences of banks between mt8173/mt2701 and mt2712
+#-------------------------------------------------------------
+#mt8173 and mt2701:
+#port offset bank
+#shared 0x0000 SPLLC
+# 0x0100 FMREG
+#u2 port0 0x0800 U2PHY_COM
+#u3 port0 0x0900 U3PHYD
+# 0x0a00 U3PHYD_BANK2
+# 0x0b00 U3PHYA
+# 0x0c00 U3PHYA_DA
+#u2 port1 0x1000 U2PHY_COM
+#u3 port1 0x1100 U3PHYD
+# 0x1200 U3PHYD_BANK2
+# 0x1300 U3PHYA
+# 0x1400 U3PHYA_DA
+#u2 port2 0x1800 U2PHY_COM
+# ...
+#
+#mt2712:
+#port offset bank
+#u2 port0 0x0000 MISC
+# 0x0100 FMREG
+# 0x0300 U2PHY_COM
+#u3 port0 0x0700 SPLLC
+# 0x0800 CHIP
+# 0x0900 U3PHYD
+# 0x0a00 U3PHYD_BANK2
+# 0x0b00 U3PHYA
+# 0x0c00 U3PHYA_DA
+#u2 port1 0x1000 MISC
+# 0x1100 FMREG
+# 0x1300 U2PHY_COM
+#u3 port1 0x1700 SPLLC
+# 0x1800 CHIP
+# 0x1900 U3PHYD
+# 0x1a00 U3PHYD_BANK2
+# 0x1b00 U3PHYA
+# 0x1c00 U3PHYA_DA
+#u2 port2 0x2000 MISC
+# ...
+#
+#SPLLC shared by u3 ports and FMREG shared by u2 ports on
+#mt8173/mt2701 are put back into each port; a new bank MISC for
+#u2 ports and CHIP for u3 ports are added on mt2712.
+
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
deleted file mode 100644
index dd75b676b71d..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-MediaTek T-PHY binding
---------------------------
-
-T-phy controller supports physical layer functionality for a number of
-controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
-
-Required properties (controller (parent) node):
- - compatible : should be one of
- "mediatek,generic-tphy-v1"
- "mediatek,generic-tphy-v2"
- "mediatek,mt2701-u3phy" (deprecated)
- "mediatek,mt2712-u3phy" (deprecated)
- "mediatek,mt8173-u3phy";
- make use of "mediatek,generic-tphy-v1" on mt2701 instead and
- "mediatek,generic-tphy-v2" on mt2712 instead.
-
-- #address-cells: the number of cells used to represent physical
- base addresses.
-- #size-cells: the number of cells used to represent the size of an address.
-- ranges: the address mapping relationship to the parent, defined with
- - empty value: if optional 'reg' is used.
- - non-empty value: if optional 'reg' is not used. should set
- the child's base address to 0, the physical address
- within parent's address space, and the length of
- the address map.
-
-Required nodes : a sub-node is required for each port the controller
- provides. Address range information including the usual
- 'reg' property is used inside these nodes to describe
- the controller's topology.
-
-Optional properties (controller (parent) node):
- - reg : offset and length of register shared by multiple ports,
- exclude port's private register. It is needed on mt2701
- and mt8173, but not on mt2712.
- - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate
- calibrate
- - mediatek,src-coef : coefficient for slew rate calibrate, depends on
- SoC process
-
-Required properties (port (child) node):
-- reg : address and length of the register set for the port.
-- #phy-cells : should be 1 (See second example)
- cell after port phandle is phy type from:
- - PHY_TYPE_USB2
- - PHY_TYPE_USB3
- - PHY_TYPE_PCIE
- - PHY_TYPE_SATA
-
-Optional properties (PHY_TYPE_USB2 port (child) node):
-- clocks : a list of phandle + clock-specifier pairs, one for each
- entry in clock-names
-- clock-names : may contain
- "ref": 48M reference clock for HighSpeed (digital) phy; and 26M
- reference clock for SuperSpeed (digital) phy, sometimes is
- 24M, 25M or 27M, depended on platform.
- "da_ref": the reference clock of analog phy, used if the clocks
- of analog and digital phys are separated, otherwise uses
- "ref" clock only if needed.
-
-- mediatek,eye-src : u32, the value of slew rate calibrate
-- mediatek,eye-vrt : u32, the selection of VRT reference voltage
-- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage
-- mediatek,bc12 : bool, enable BC12 of u2phy if support it
-- mediatek,discth : u32, the selection of disconnect threshold
-- mediatek,intr : u32, the selection of internal R (resistance)
-
-Example:
-
-u3phy: usb-phy@11290000 {
- compatible = "mediatek,mt8173-u3phy";
- reg = <0 0x11290000 0 0x800>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- u2port0: usb-phy@11290800 {
- reg = <0 0x11290800 0 0x100>;
- clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
- clock-names = "ref";
- #phy-cells = <1>;
- };
-
- u3port0: usb-phy@11290900 {
- reg = <0 0x11290800 0 0x700>;
- clocks = <&clk26m>;
- clock-names = "ref";
- #phy-cells = <1>;
- };
-
- u2port1: usb-phy@11291000 {
- reg = <0 0x11291000 0 0x100>;
- clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
- clock-names = "ref";
- #phy-cells = <1>;
- };
-};
-
-Specifying phy control of devices
----------------------------------
-
-Device nodes should specify the configuration required in their "phys"
-property, containing a phandle to the phy port node and a device type;
-phy-names for each port are optional.
-
-Example:
-
-#include <dt-bindings/phy/phy.h>
-
-usb30: usb@11270000 {
- ...
- phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
- phy-names = "usb2-0", "usb3-0";
- ...
-};
-
-
-Layout differences of banks between mt8173/mt2701 and mt2712
--------------------------------------------------------------
-mt8173 and mt2701:
-port offset bank
-shared 0x0000 SPLLC
- 0x0100 FMREG
-u2 port0 0x0800 U2PHY_COM
-u3 port0 0x0900 U3PHYD
- 0x0a00 U3PHYD_BANK2
- 0x0b00 U3PHYA
- 0x0c00 U3PHYA_DA
-u2 port1 0x1000 U2PHY_COM
-u3 port1 0x1100 U3PHYD
- 0x1200 U3PHYD_BANK2
- 0x1300 U3PHYA
- 0x1400 U3PHYA_DA
-u2 port2 0x1800 U2PHY_COM
- ...
-
-mt2712:
-port offset bank
-u2 port0 0x0000 MISC
- 0x0100 FMREG
- 0x0300 U2PHY_COM
-u3 port0 0x0700 SPLLC
- 0x0800 CHIP
- 0x0900 U3PHYD
- 0x0a00 U3PHYD_BANK2
- 0x0b00 U3PHYA
- 0x0c00 U3PHYA_DA
-u2 port1 0x1000 MISC
- 0x1100 FMREG
- 0x1300 U2PHY_COM
-u3 port1 0x1700 SPLLC
- 0x1800 CHIP
- 0x1900 U3PHYD
- 0x1a00 U3PHYD_BANK2
- 0x1b00 U3PHYA
- 0x1c00 U3PHYA_DA
-u2 port2 0x2000 MISC
- ...
-
- SPLLC shared by u3 ports and FMREG shared by u2 ports on
-mt8173/mt2701 are put back into each port; a new bank MISC for
-u2 ports and CHIP for u3 ports are added on mt2712.
--
2.18.0
\
 
 \ /
  Last update: 2020-09-22 10:00    [W:0.063 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site