lkml.org 
[lkml]   [2020]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/6] Support more HDMI modes on RK3228/RK3328
Date
This is a long overdue revival of an old series that prepares support for
more HDMI modes, YUV420 and 10-bit output on RK3228/RK3328.

This v3 series contains the original v2 patches targeting the inno hdmi phy
driver, a separate series targeting drm driver should follow in a few days.

Part of this has been reworked from vendor BSP 4.4 kernel commits.

Patch 1-5 fixes issues and shortcomings in the inno hdmi phy driver.

Patch 6 adds support for more pixel clock rates in order to support
common DMT modes in addition to CEA modes.

Changes in v3:
- split series
- drop drm and device tree changes

Changes in v2:
- collect acked-by tag
- drop the limit resolution width to 3840 patch

This series is also available at [1].

[1] https://github.com/Kwiboo/linux-rockchip/commits/next-20200922-inno-hdmi-phy

Regards,
Jonas

Algea Cao (1):
phy/rockchip: inno-hdmi: Support more pre-pll configuration

Huicong Xu (1):
phy/rockchip: inno-hdmi: force set_rate on power_on

Jonas Karlman (3):
phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328
phy/rockchip: inno-hdmi: remove unused no_c from rk3328 recalc_rate
phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write

Zheng Yang (1):
phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate

drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 110 ++++++++++++------
1 file changed, 74 insertions(+), 36 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2020-09-22 23:05    [W:0.151 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site