lkml.org 
[lkml]   [2020]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/32] auxdisplay: Move write_data pointer to hd44780_common
Date
From: Lars Poeschel <poeschel@lemonage.de>

This moves the write_data function pointer from struct charlcd_ops to
struct hd44780_common. This is the function that actually writes the
character to the display. This hd44780 hardware specific function is
used by two drivers at the moment.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
drivers/auxdisplay/charlcd.c | 12 ++++++------
drivers/auxdisplay/charlcd.h | 1 -
drivers/auxdisplay/hd44780.c | 16 +++++++++-------
drivers/auxdisplay/hd44780_common.h | 1 +
drivers/auxdisplay/panel.c | 12 ++++++------
5 files changed, 22 insertions(+), 20 deletions(-)

diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c
index 59e0a815bf3d..df54078656c1 100644
--- a/drivers/auxdisplay/charlcd.c
+++ b/drivers/auxdisplay/charlcd.c
@@ -182,7 +182,7 @@ static void charlcd_print(struct charlcd *lcd, char c)
if (priv->addr.x < hdc->bwidth) {
if (lcd->char_conv)
c = lcd->char_conv[(unsigned char)c];
- lcd->ops->write_data(lcd, c);
+ hdc->write_data(hdc, c);
priv->addr.x++;

/* prevents the cursor from wrapping onto the next line */
@@ -202,7 +202,7 @@ static void charlcd_clear_fast(struct charlcd *lcd)
lcd->ops->clear_fast(lcd);
else
for (pos = 0; pos < min(2, lcd->height) * hdc->hwidth; pos++)
- lcd->ops->write_data(lcd, ' ');
+ hdc->write_data(hdc, ' ');

charlcd_home(lcd);
}
@@ -446,7 +446,7 @@ static inline int handle_lcd_special_code(struct charlcd *lcd)
int x;

for (x = priv->addr.x; x < hdc->bwidth; x++)
- lcd->ops->write_data(lcd, ' ');
+ hdc->write_data(hdc, ' ');

/* restore cursor position */
charlcd_gotoxy(lcd);
@@ -505,7 +505,7 @@ static inline int handle_lcd_special_code(struct charlcd *lcd)

lcd->ops->write_cmd(lcd, LCD_CMD_SET_CGRAM_ADDR | (cgaddr * 8));
for (addr = 0; addr < cgoffset; addr++)
- lcd->ops->write_data(lcd, cgbytes[addr]);
+ hdc->write_data(hdc, cgbytes[addr]);

/* ensures that we stop writing to CGRAM */
charlcd_gotoxy(lcd);
@@ -587,7 +587,7 @@ static void charlcd_write_char(struct charlcd *lcd, char c)
priv->addr.x--;
}
/* replace with a space */
- lcd->ops->write_data(lcd, ' ');
+ hdc->write_data(hdc, ' ');
/* back one char again */
lcd->ops->write_cmd(lcd, LCD_CMD_SHIFT);
break;
@@ -601,7 +601,7 @@ static void charlcd_write_char(struct charlcd *lcd, char c)
* go to the beginning of the next line
*/
for (; priv->addr.x < hdc->bwidth; priv->addr.x++)
- lcd->ops->write_data(lcd, ' ');
+ hdc->write_data(hdc, ' ');
priv->addr.x = 0;
priv->addr.y = (priv->addr.y + 1) % lcd->height;
charlcd_gotoxy(lcd);
diff --git a/drivers/auxdisplay/charlcd.h b/drivers/auxdisplay/charlcd.h
index 5dce9dd36562..fba4f2cd42c4 100644
--- a/drivers/auxdisplay/charlcd.h
+++ b/drivers/auxdisplay/charlcd.h
@@ -27,7 +27,6 @@ struct charlcd {
struct charlcd_ops {
/* Required */
void (*write_cmd)(struct charlcd *lcd, int cmd);
- void (*write_data)(struct charlcd *lcd, int data);

/* Optional */
void (*write_cmd_raw4)(struct charlcd *lcd, int cmd); /* 4-bit only */
diff --git a/drivers/auxdisplay/hd44780.c b/drivers/auxdisplay/hd44780.c
index f6786239c36f..922f0e0d2e6d 100644
--- a/drivers/auxdisplay/hd44780.c
+++ b/drivers/auxdisplay/hd44780.c
@@ -115,9 +115,8 @@ static void hd44780_write_cmd_gpio8(struct charlcd *lcd, int cmd)
}

/* Send data to the LCD panel in 8 bit GPIO mode */
-static void hd44780_write_data_gpio8(struct charlcd *lcd, int data)
+static void hd44780_write_data_gpio8(struct hd44780_common *hdc, int data)
{
- struct hd44780_common *hdc = lcd->drvdata;
struct hd44780 *hd = hdc->hd44780;

hd44780_write_gpio8(hd, data, 1);
@@ -128,7 +127,6 @@ static void hd44780_write_data_gpio8(struct charlcd *lcd, int data)

static const struct charlcd_ops hd44780_ops_gpio8 = {
.write_cmd = hd44780_write_cmd_gpio8,
- .write_data = hd44780_write_data_gpio8,
.backlight = hd44780_backlight,
};

@@ -163,9 +161,8 @@ static void hd44780_write_cmd_raw_gpio4(struct charlcd *lcd, int cmd)
}

/* Send data to the LCD panel in 4 bit GPIO mode */
-static void hd44780_write_data_gpio4(struct charlcd *lcd, int data)
+static void hd44780_write_data_gpio4(struct hd44780_common *hdc, int data)
{
- struct hd44780_common *hdc = lcd->drvdata;
struct hd44780 *hd = hdc->hd44780;

hd44780_write_gpio4(hd, data, 1);
@@ -177,7 +174,6 @@ static void hd44780_write_data_gpio4(struct charlcd *lcd, int data)
static const struct charlcd_ops hd44780_ops_gpio4 = {
.write_cmd = hd44780_write_cmd_gpio4,
.write_cmd_raw4 = hd44780_write_cmd_raw_gpio4,
- .write_data = hd44780_write_data_gpio4,
.backlight = hd44780_backlight,
};

@@ -276,7 +272,13 @@ static int hd44780_probe(struct platform_device *pdev)
device_property_read_u32(dev, "internal-buffer-width", &hdc->bwidth);

hdc->ifwidth = ifwidth;
- lcd->ops = ifwidth == 8 ? &hd44780_ops_gpio8 : &hd44780_ops_gpio4;
+ if (ifwidth == 8) {
+ lcd->ops = &hd44780_ops_gpio8;
+ hdc->write_data = hd44780_write_data_gpio8;
+ } else {
+ lcd->ops = &hd44780_ops_gpio4;
+ hdc->write_data = hd44780_write_data_gpio4;
+ }

ret = charlcd_register(lcd);
if (ret)
diff --git a/drivers/auxdisplay/hd44780_common.h b/drivers/auxdisplay/hd44780_common.h
index 1100e0a32394..1d686c99b2c1 100644
--- a/drivers/auxdisplay/hd44780_common.h
+++ b/drivers/auxdisplay/hd44780_common.h
@@ -7,6 +7,7 @@ struct hd44780_common {
int ifwidth; /* 4-bit or 8-bit (default) */
int bwidth; /* Default set by hd44780_alloc() */
int hwidth; /* Default set by hd44780_alloc() */
+ void (*write_data)(struct hd44780_common *hdc, int data);
void *hd44780;
};

diff --git a/drivers/auxdisplay/panel.c b/drivers/auxdisplay/panel.c
index cec6b729d668..15100d21a6e9 100644
--- a/drivers/auxdisplay/panel.c
+++ b/drivers/auxdisplay/panel.c
@@ -734,7 +734,7 @@ static void lcd_write_cmd_s(struct charlcd *charlcd, int cmd)
}

/* send data to the LCD panel in serial mode */
-static void lcd_write_data_s(struct charlcd *charlcd, int data)
+static void lcd_write_data_s(struct hd44780_common *hdc, int data)
{
spin_lock_irq(&pprt_lock);
lcd_send_serial(0x5F); /* R/W=W, RS=1 */
@@ -767,7 +767,7 @@ static void lcd_write_cmd_p8(struct charlcd *charlcd, int cmd)
}

/* send data to the LCD panel in 8 bits parallel mode */
-static void lcd_write_data_p8(struct charlcd *charlcd, int data)
+static void lcd_write_data_p8(struct hd44780_common *hdc, int data)
{
spin_lock_irq(&pprt_lock);
/* present the data to the data port */
@@ -799,7 +799,7 @@ static void lcd_write_cmd_tilcd(struct charlcd *charlcd, int cmd)
}

/* send data to the TI LCD panel */
-static void lcd_write_data_tilcd(struct charlcd *charlcd, int data)
+static void lcd_write_data_tilcd(struct hd44780_common *hdc, int data)
{
spin_lock_irq(&pprt_lock);
/* present the data to the data port */
@@ -874,21 +874,18 @@ static void lcd_clear_fast_tilcd(struct charlcd *charlcd)

static const struct charlcd_ops charlcd_serial_ops = {
.write_cmd = lcd_write_cmd_s,
- .write_data = lcd_write_data_s,
.clear_fast = lcd_clear_fast_s,
.backlight = lcd_backlight,
};

static const struct charlcd_ops charlcd_parallel_ops = {
.write_cmd = lcd_write_cmd_p8,
- .write_data = lcd_write_data_p8,
.clear_fast = lcd_clear_fast_p8,
.backlight = lcd_backlight,
};

static const struct charlcd_ops charlcd_tilcd_ops = {
.write_cmd = lcd_write_cmd_tilcd,
- .write_data = lcd_write_data_tilcd,
.clear_fast = lcd_clear_fast_tilcd,
.backlight = lcd_backlight,
};
@@ -1019,6 +1016,7 @@ static void lcd_init(void)

if (lcd.proto == LCD_PROTO_SERIAL) { /* SERIAL */
charlcd->ops = &charlcd_serial_ops;
+ hdc->write_data = lcd_write_data_s;

if (lcd.pins.cl == PIN_NOT_SET)
lcd.pins.cl = DEFAULT_LCD_PIN_SCL;
@@ -1027,6 +1025,7 @@ static void lcd_init(void)

} else if (lcd.proto == LCD_PROTO_PARALLEL) { /* PARALLEL */
charlcd->ops = &charlcd_parallel_ops;
+ hdc->write_data = lcd_write_data_p8;

if (lcd.pins.e == PIN_NOT_SET)
lcd.pins.e = DEFAULT_LCD_PIN_E;
@@ -1036,6 +1035,7 @@ static void lcd_init(void)
lcd.pins.rw = DEFAULT_LCD_PIN_RW;
} else {
charlcd->ops = &charlcd_tilcd_ops;
+ hdc->write_data = lcd_write_data_tilcd;
}

if (lcd.pins.bl == PIN_NOT_SET)
--
2.28.0
\
 
 \ /
  Last update: 2020-09-21 16:48    [W:0.216 / U:4.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site