lkml.org 
[lkml]   [2020]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 09/11] usb: phy: phy-mv-usb: convert to readl_poll_timeout_atomic()
Date
Use readl_poll_timeout_atomic() to simplify code

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4: no changes

v3: re-align argument of log suggested by Sergei

v2: udelay 10us instead of 20us according to kerneldoc
---
drivers/usb/phy/phy-mv-usb.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index ce767ec..576d925 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/uaccess.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
@@ -135,8 +136,8 @@ static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,

static int mv_otg_reset(struct mv_otg *mvotg)
{
- unsigned int loops;
u32 tmp;
+ int ret;

/* Stop the controller */
tmp = readl(&mvotg->op_regs->usbcmd);
@@ -146,15 +147,12 @@ static int mv_otg_reset(struct mv_otg *mvotg)
/* Reset the controller to get default values */
writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);

- loops = 500;
- while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
- if (loops == 0) {
- dev_err(&mvotg->pdev->dev,
- "Wait for RESET completed TIMEOUT\n");
- return -ETIMEDOUT;
- }
- loops--;
- udelay(20);
+ ret = readl_poll_timeout_atomic(&mvotg->op_regs->usbcmd, tmp,
+ (tmp & USBCMD_CTRL_RESET), 10, 10000);
+ if (ret < 0) {
+ dev_err(&mvotg->pdev->dev,
+ "Wait for RESET completed TIMEOUT\n");
+ return ret;
}

writel(0x0, &mvotg->op_regs->usbintr);
--
1.9.1
\
 
 \ /
  Last update: 2020-09-21 08:18    [W:0.071 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site