lkml.org 
[lkml]   [2020]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v7 0/4] Add Caninos Loucos Labrador CoM and Base Board Device Tree
Date
I'm adding to the series the new Labrador v3, since it uses the same vendor
prefix. Thanks Andreas, Mani and Rob for your time reviewing it.

Changes since v6:
- Add new caninos,labrador-v3 CoM and caninos,labrador-base-m2 base board
- Improve Model description

Changes since v5:
(Suggested by Andreas Färber)
- Put caninos,labrador-v2 as const one level down

Matheus Castello (4):
dt-bindings: Add vendor prefix for Caninos Loucos
dt-bindings: arm: actions: Document Caninos Loucos Labrador
ARM: dts: Add Caninos Loucos Labrador v2
arm64: dts: Add Caninos Loucos Labrador v3

.../devicetree/bindings/arm/actions.yaml | 10 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 1 +
.../arm/boot/dts/owl-s500-labrador-base-m.dts | 35 +++++
arch/arm/boot/dts/owl-s500-labrador-v2.dtsi | 22 ++++
arch/arm64/boot/dts/actions/Makefile | 2 +
.../dts/actions/s700-labrador-base-m2.dts | 34 +++++
.../boot/dts/actions/s700-labrador-v3.dtsi | 122 ++++++++++++++++++
8 files changed, 228 insertions(+)
create mode 100644 arch/arm/boot/dts/owl-s500-labrador-base-m.dts
create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
create mode 100644 arch/arm64/boot/dts/actions/s700-labrador-base-m2.dts
create mode 100644 arch/arm64/boot/dts/actions/s700-labrador-v3.dtsi

--
2.28.0

\
 
 \ /
  Last update: 2020-09-22 05:08    [W:0.117 / U:6.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site