lkml.org 
[lkml]   [2020]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.8 100/118] serial: core: fix port-lock initialisation
Date
From: Johan Hovold <johan@kernel.org>

commit fe88c6489264eaea23570dfdf03e1d3f5f47f423 upstream.

Commit f743061a85f5 ("serial: core: Initialise spin lock before use in
uart_configure_port()") tried to work around a breakage introduced by
commit a3cb39d258ef ("serial: core: Allow detach and attach serial
device for console") by adding a second initialisation of the port lock
when registering the port.

As reported by the build robots [1], this doesn't really solve the
regression introduced by the console-detach changes and also adds a
second redundant initialisation of the lock for normal ports.

Start cleaning up this mess by removing the redundant initialisation and
making sure that the port lock is again initialised once-only for ports
that aren't already in use as a console.

[1] https://lore.kernel.org/r/20200802054852.GR23458@shao2-debian

Fixes: f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()")
Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Cc: stable <stable@vger.kernel.org> # 5.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200909143101.15389-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/tty/serial/serial_core.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)

--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2376,13 +2376,6 @@ uart_configure_port(struct uart_driver *
uart_change_pm(state, UART_PM_STATE_ON);

/*
- * If this driver supports console, and it hasn't been
- * successfully registered yet, initialise spin lock for it.
- */
- if (port->cons && !(port->cons->flags & CON_ENABLED))
- __uart_port_spin_lock_init(port);
-
- /*
* Ensure that the modem control lines are de-activated.
* keep the DTR setting that is set in uart_set_options()
* We probably don't need a spinlock around this, but
@@ -2897,7 +2890,12 @@ int uart_add_one_port(struct uart_driver
goto out;
}

- uart_port_spin_lock_init(uport);
+ /*
+ * If this port is in use as a console then the spinlock is already
+ * initialised.
+ */
+ if (!uart_console_enabled(uport))
+ __uart_port_spin_lock_init(uport);

if (uport->cons && uport->dev)
of_console_check(uport->dev->of_node, uport->cons->name, uport->line);

\
 
 \ /
  Last update: 2020-09-21 18:47    [W:0.321 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site