lkml.org 
[lkml]   [2020]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 00/28] The new cgroup slab memory controller
From
Date
On 8/28/20 6:47 PM, Pavel Tatashin wrote:
> There appears to be another problem that is related to the
> cgroup_mutex -> mem_hotplug_lock deadlock described above.
>
> In the original deadlock that I described, the workaround is to
> replace crash dump from piping to Linux traditional save to files
> method. However, after trying this workaround, I still observed
> hardware watchdog resets during machine shutdown.
>
> The new problem occurs for the following reason: upon shutdown systemd
> calls a service that hot-removes memory, and if hot-removing fails for

Why is that hotremove even needed if we're shutting down? Are there any
(virtualization?) platforms where it makes some difference over plain
shutdown/restart?

> some reason systemd kills that service after timeout. However, systemd
> is never able to kill the service, and we get hardware reset caused by
> watchdog or a hang during shutdown:
>
> Thread #1: memory hot-remove systemd service
> Loops indefinitely, because if there is something still to be migrated
> this loop never terminates. However, this loop can be terminated via
> signal from systemd after timeout.
> __offline_pages()
> do {
> pfn = scan_movable_pages(pfn, end_pfn);
> # Returns 0, meaning there is nothing available to
> # migrate, no page is PageLRU(page)
> ...
> ret = walk_system_ram_range(start_pfn, end_pfn - start_pfn,
> NULL, check_pages_isolated_cb);
> # Returns -EBUSY, meaning there is at least one PFN that
> # still has to be migrated.
> } while (ret);
>
> Thread #2: ccs killer kthread
> css_killed_work_fn
> cgroup_mutex <- Grab this Mutex
> mem_cgroup_css_offline
> memcg_offline_kmem.part
> memcg_deactivate_kmem_caches
> get_online_mems
> mem_hotplug_lock <- waits for Thread#1 to get read access
>
> Thread #3: systemd
> ksys_read
> vfs_read
> __vfs_read
> seq_read
> proc_single_show
> proc_cgroup_show
> mutex_lock -> wait for cgroup_mutex that is owned by Thread #2
>
> Thus, thread #3 systemd stuck, and unable to deliver timeout interrupt
> to thread #1.
>
> The proper fix for both of the problems is to avoid cgroup_mutex ->
> mem_hotplug_lock ordering that was recently fixed in the mainline but
> still present in all stable branches. Unfortunately, I do not see a
> simple fix in how to remove mem_hotplug_lock from
> memcg_deactivate_kmem_caches without using Roman's series that is too
> big for stable.
>
> Thanks,
> Pasha
>
> On Wed, Aug 12, 2020 at 8:31 PM Pavel Tatashin
> <pasha.tatashin@soleen.com> wrote:
>>
>> On Wed, Aug 12, 2020 at 8:04 PM Roman Gushchin <guro@fb.com> wrote:
>> >
>> > On Wed, Aug 12, 2020 at 07:16:08PM -0400, Pavel Tatashin wrote:
>> > > Guys,
>> > >
>> > > There is a convoluted deadlock that I just root caused, and that is
>> > > fixed by this work (at least based on my code inspection it appears to
>> > > be fixed); but the deadlock exists in older and stable kernels, and I
>> > > am not sure whether to create a separate patch for it, or backport
>> > > this whole thing.
>> >
>>
>> Hi Roman,
>>
>> > Hi Pavel,
>> >
>> > wow, it's a quite complicated deadlock. Thank you for providing
>> > a perfect analysis!
>>
>> Thank you, it indeed took me a while to fully grasp the deadlock.
>>
>> >
>> > Unfortunately, backporting the whole new slab controller isn't an option:
>> > it's way too big and invasive.
>>
>> This is what I thought as well, this is why I want to figure out what
>> is the best way forward.
>>
>> > Do you already have a standalone fix?
>>
>> Not yet, I do not have a standalone fix. I suspect the best fix would
>> be to address fix css_killed_work_fn() stack so we never have:
>> cgroup_mutex -> mem_hotplug_lock. Either decoupling them or reverse
>> the order would work. If you have suggestions since you worked on this
>> code recently, please let me know.
>>
>> Thank you,
>> Pasha
>>
>> >
>> > Thanks!
>> >
>> >
>> > >
>> > > Thread #1: Hot-removes memory
>> > > device_offline
>> > > memory_subsys_offline
>> > > offline_pages
>> > > __offline_pages
>> > > mem_hotplug_lock <- write access
>> > > waits for Thread #3 refcnt for pfn 9e5113 to get to 1 so it can
>> > > migrate it.
>> > >
>> > > Thread #2: ccs killer kthread
>> > > css_killed_work_fn
>> > > cgroup_mutex <- Grab this Mutex
>> > > mem_cgroup_css_offline
>> > > memcg_offline_kmem.part
>> > > memcg_deactivate_kmem_caches
>> > > get_online_mems
>> > > mem_hotplug_lock <- waits for Thread#1 to get read access
>> > >
>> > > Thread #3: crashing userland program
>> > > do_coredump
>> > > elf_core_dump
>> > > get_dump_page() -> get page with pfn#9e5113, and increment refcnt
>> > > dump_emit
>> > > __kernel_write
>> > > __vfs_write
>> > > new_sync_write
>> > > pipe_write
>> > > pipe_wait -> waits for Thread #4 systemd-coredump to
>> > > read the pipe
>> > >
>> > > Thread #4: systemd-coredump
>> > > ksys_read
>> > > vfs_read
>> > > __vfs_read
>> > > seq_read
>> > > proc_single_show
>> > > proc_cgroup_show
>> > > cgroup_mutex -> waits from Thread #2 for this lock.
>> >
>> > >
>> > > In Summary:
>> > > Thread#1 waits for Thread#3 for refcnt, Thread#3 waits for Thread#4 to
>> > > read pipe. Thread#4 waits for Thread#2 for cgroup_mutex lock; Thread#2
>> > > waits for Thread#1 for mem_hotplug_lock rwlock.
>> > >
>> > > This work appears to fix this deadlock because cgroup_mutex is not
>> > > called anymore before mem_hotplug_lock (unless I am missing it), as it
>> > > removes memcg_deactivate_kmem_caches.
>> > >
>> > > Thank you,
>> > > Pasha
>> > >
>> > > On Wed, Jan 29, 2020 at 9:42 PM Roman Gushchin <guro@fb.com> wrote:
>> > > >
>> > > > On Thu, Jan 30, 2020 at 07:36:26AM +0530, Bharata B Rao wrote:
>> > > > > On Mon, Jan 27, 2020 at 09:34:25AM -0800, Roman Gushchin wrote:
>> > > > > > The existing cgroup slab memory controller is based on the idea of
>> > > > > > replicating slab allocator internals for each memory cgroup.
>> > > > > > This approach promises a low memory overhead (one pointer per page),
>> > > > > > and isn't adding too much code on hot allocation and release paths.
>> > > > > > But is has a very serious flaw: it leads to a low slab utilization.
>> > > > > >
>> > > > > > Using a drgn* script I've got an estimation of slab utilization on
>> > > > > > a number of machines running different production workloads. In most
>> > > > > > cases it was between 45% and 65%, and the best number I've seen was
>> > > > > > around 85%. Turning kmem accounting off brings it to high 90s. Also
>> > > > > > it brings back 30-50% of slab memory. It means that the real price
>> > > > > > of the existing slab memory controller is way bigger than a pointer
>> > > > > > per page.
>> > > > > >
>> > > > > > The real reason why the existing design leads to a low slab utilization
>> > > > > > is simple: slab pages are used exclusively by one memory cgroup.
>> > > > > > If there are only few allocations of certain size made by a cgroup,
>> > > > > > or if some active objects (e.g. dentries) are left after the cgroup is
>> > > > > > deleted, or the cgroup contains a single-threaded application which is
>> > > > > > barely allocating any kernel objects, but does it every time on a new CPU:
>> > > > > > in all these cases the resulting slab utilization is very low.
>> > > > > > If kmem accounting is off, the kernel is able to use free space
>> > > > > > on slab pages for other allocations.
>> > > > > >
>> > > > > > Arguably it wasn't an issue back to days when the kmem controller was
>> > > > > > introduced and was an opt-in feature, which had to be turned on
>> > > > > > individually for each memory cgroup. But now it's turned on by default
>> > > > > > on both cgroup v1 and v2. And modern systemd-based systems tend to
>> > > > > > create a large number of cgroups.
>> > > > > >
>> > > > > > This patchset provides a new implementation of the slab memory controller,
>> > > > > > which aims to reach a much better slab utilization by sharing slab pages
>> > > > > > between multiple memory cgroups. Below is the short description of the new
>> > > > > > design (more details in commit messages).
>> > > > > >
>> > > > > > Accounting is performed per-object instead of per-page. Slab-related
>> > > > > > vmstat counters are converted to bytes. Charging is performed on page-basis,
>> > > > > > with rounding up and remembering leftovers.
>> > > > > >
>> > > > > > Memcg ownership data is stored in a per-slab-page vector: for each slab page
>> > > > > > a vector of corresponding size is allocated. To keep slab memory reparenting
>> > > > > > working, instead of saving a pointer to the memory cgroup directly an
>> > > > > > intermediate object is used. It's simply a pointer to a memcg (which can be
>> > > > > > easily changed to the parent) with a built-in reference counter. This scheme
>> > > > > > allows to reparent all allocated objects without walking them over and
>> > > > > > changing memcg pointer to the parent.
>> > > > > >
>> > > > > > Instead of creating an individual set of kmem_caches for each memory cgroup,
>> > > > > > two global sets are used: the root set for non-accounted and root-cgroup
>> > > > > > allocations and the second set for all other allocations. This allows to
>> > > > > > simplify the lifetime management of individual kmem_caches: they are
>> > > > > > destroyed with root counterparts. It allows to remove a good amount of code
>> > > > > > and make things generally simpler.
>> > > > > >
>> > > > > > The patchset* has been tested on a number of different workloads in our
>> > > > > > production. In all cases it saved significant amount of memory, measured
>> > > > > > from high hundreds of MBs to single GBs per host. On average, the size
>> > > > > > of slab memory has been reduced by 35-45%.
>> > > > >
>> > > > > Here are some numbers from multiple runs of sysbench and kernel compilation
>> > > > > with this patchset on a 10 core POWER8 host:
>> > > > >
>> > > > > ==========================================================================
>> > > > > Peak usage of memory.kmem.usage_in_bytes, memory.usage_in_bytes and
>> > > > > meminfo:Slab for Sysbench oltp_read_write with mysqld running as part
>> > > > > of a mem cgroup (Sampling every 5s)
>> > > > > --------------------------------------------------------------------------
>> > > > > 5.5.0-rc7-mm1 +slab patch %reduction
>> > > > > --------------------------------------------------------------------------
>> > > > > memory.kmem.usage_in_bytes 15859712 4456448 72
>> > > > > memory.usage_in_bytes 337510400 335806464 .5
>> > > > > Slab: (kB) 814336 607296 25
>> > > > >
>> > > > > memory.kmem.usage_in_bytes 16187392 4653056 71
>> > > > > memory.usage_in_bytes 318832640 300154880 5
>> > > > > Slab: (kB) 789888 559744 29
>> > > > > --------------------------------------------------------------------------
>> > > > >
>> > > > >
>> > > > > Peak usage of memory.kmem.usage_in_bytes, memory.usage_in_bytes and
>> > > > > meminfo:Slab for kernel compilation (make -s -j64) Compilation was
>> > > > > done from bash that is in a memory cgroup. (Sampling every 5s)
>> > > > > --------------------------------------------------------------------------
>> > > > > 5.5.0-rc7-mm1 +slab patch %reduction
>> > > > > --------------------------------------------------------------------------
>> > > > > memory.kmem.usage_in_bytes 338493440 231931904 31
>> > > > > memory.usage_in_bytes 7368015872 6275923968 15
>> > > > > Slab: (kB) 1139072 785408 31
>> > > > >
>> > > > > memory.kmem.usage_in_bytes 341835776 236453888 30
>> > > > > memory.usage_in_bytes 6540427264 6072893440 7
>> > > > > Slab: (kB) 1074304 761280 29
>> > > > >
>> > > > > memory.kmem.usage_in_bytes 340525056 233570304 31
>> > > > > memory.usage_in_bytes 6406209536 6177357824 3
>> > > > > Slab: (kB) 1244288 739712 40
>> > > > > --------------------------------------------------------------------------
>> > > > >
>> > > > > Slab consumption right after boot
>> > > > > --------------------------------------------------------------------------
>> > > > > 5.5.0-rc7-mm1 +slab patch %reduction
>> > > > > --------------------------------------------------------------------------
>> > > > > Slab: (kB) 821888 583424 29
>> > > > > ==========================================================================
>> > > > >
>> > > > > Summary:
>> > > > >
>> > > > > With sysbench and kernel compilation, memory.kmem.usage_in_bytes shows
>> > > > > around 70% and 30% reduction consistently.
>> > > > >
>> > > > > Didn't see consistent reduction of memory.usage_in_bytes with sysbench and
>> > > > > kernel compilation.
>> > > > >
>> > > > > Slab usage (from /proc/meminfo) shows consistent 30% reduction and the
>> > > > > same is seen right after boot too.
>> > > >
>> > > > That's just perfect!
>> > > >
>> > > > memory.usage_in_bytes was most likely the same because the freed space
>> > > > was taken by pagecache.
>> > > >
>> > > > Thank you very much for testing!
>> > > >
>> > > > Roman
>

\
 
 \ /
  Last update: 2020-09-02 11:53    [W:0.193 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site