lkml.org 
[lkml]   [2020]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] mmc: sdhci-of-esdhc: Don't walk device-tree on every interrupt
+ Yinbo Zhu

On Wed, 2 Sep 2020 at 06:06, Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:
>
> Commit b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support")
> added code to check for a specific compatible string in the device-tree
> on every esdhc interrupt. We know that if it's present the compatible
> string will be found on the sdhc host. Instead of walking the
> device-tree, go directly to the sdhc host's device and use
> of_device_is_compatible().
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Thanks for the patch. Indeed, this isn't the way we should implement quirks.

However, could you perhaps do the OF parsing in esdhc_init() and
assign a quirk flag that you check in esdhc_irq() instead?

Along the lines of how we do it for "quirk_delay_before_data_reset".

Kind regards
Uffe

> ---
>
> I found this in passing while trying to track down another issue using ftrace.
> I found it odd that I was seeing a lot of calls to __of_device_is_compatible()
> coming from esdhc_irq() (the fact that this interrupt is going off on my board
> is also odd, but that's a different story).
>
> drivers/mmc/host/sdhci-of-esdhc.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
> index 7c73d243dc6c..11c8c522d623 100644
> --- a/drivers/mmc/host/sdhci-of-esdhc.c
> +++ b/drivers/mmc/host/sdhci-of-esdhc.c
> @@ -1177,10 +1177,11 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host,
>
> static u32 esdhc_irq(struct sdhci_host *host, u32 intmask)
> {
> + struct device *dev = mmc_dev(host->mmc);
> + struct device_node *np = dev->of_node;
> u32 command;
>
> - if (of_find_compatible_node(NULL, NULL,
> - "fsl,p2020-esdhc")) {
> + if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
> command = SDHCI_GET_CMD(sdhci_readw(host,
> SDHCI_COMMAND));
> if (command == MMC_WRITE_MULTIPLE_BLOCK &&
> --
> 2.28.0
>

\
 
 \ /
  Last update: 2020-09-02 10:01    [W:0.045 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site