lkml.org 
[lkml]   [2020]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm/panel: otm8009a: remove hack to force commands in HS
On Fri, Sep 18, 2020 at 01:47:18PM +0200, Yannick Fertre wrote:
> From: Antonio Borneo <antonio.borneo@st.com>
>
> The panel is able to receive commands in LP. The current hack to
> force backlight commands in HS was due to workaround an incorrect
> settings on DSI controller that prevents sending LP commands while
> video out was active.
>
> Remove the hack that forces HS commands.
>
> Signed-off-by: Antonio Borneo <antonio.borneo@st.com>

This and the next are missing your s-o-b line. Also you've done a bunch of
gpu patches arlready, want drm-misc commit rights so you can make sure
they all do land?

https://drm.pages.freedesktop.org/maintainer-tools/getting-started.html

There's tons more docs about how the tooling and process works.

Cheers, Daniel

> ---
> .../gpu/drm/panel/panel-orisetech-otm8009a.c | 18 ++----------------
> 1 file changed, 2 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> index 6ac1accade80..f80b44a8a700 100644
> --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> @@ -99,20 +99,6 @@ static void otm8009a_dcs_write_buf(struct otm8009a *ctx, const void *data,
> dev_warn(ctx->dev, "mipi dsi dcs write buffer failed\n");
> }
>
> -static void otm8009a_dcs_write_buf_hs(struct otm8009a *ctx, const void *data,
> - size_t len)
> -{
> - struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> -
> - /* data will be sent in dsi hs mode (ie. no lpm) */
> - dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> -
> - otm8009a_dcs_write_buf(ctx, data, len);
> -
> - /* restore back the dsi lpm mode */
> - dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> -}
> -
> #define dcs_write_seq(ctx, seq...) \
> ({ \
> static const u8 d[] = { seq }; \
> @@ -400,7 +386,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
> */
> data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS;
> data[1] = bd->props.brightness;
> - otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data));
> + otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
>
> /* set Brightness Control & Backlight on */
> data[1] = 0x24;
> @@ -412,7 +398,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
>
> /* Update Brightness Control & Backlight */
> data[0] = MIPI_DCS_WRITE_CONTROL_DISPLAY;
> - otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data));
> + otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
>
> return 0;
> }
> --
> 2.17.1
>

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2020-09-18 14:53    [W:0.119 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site