lkml.org 
[lkml]   [2020]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dmaengine: qcom: Add ADM driver
Hello Jonathan

On 16-09-20, 07:43, Jonathan McDowell wrote:
> From: Andy Gross <agross@codeaurora.org>
>
> (I'm not sure how best to attribute this. It's originally from Andy
> Gross, the version I picked up was a later version from Thomas Pedersen,
> and I can't find clear indication of why the latest version wasn't
> applied. The device tree details were added back in September 2014. The
> driver is the missing piece in mainline for IPQ8064 NAND support and
> I've been using it successfully with my RB3011 device on 5.8+)

Yeah not sure why the driver was missed :(
Btw this note is helpful but not great for log, you should add it after
sob lines.

> Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
> controller found in the MSM8x60 and IPQ/APQ8064 platforms.
>
> The ADM supports both memory to memory transactions and memory
> to/from peripheral device transactions. The controller also provides
> flow control capabilities for transactions to/from peripheral devices.
>
> The initial release of this driver supports slave transfers to/from
> peripherals and also incorporates CRCI (client rate control interface)
> flow control.
>
> Signed-off-by: Andy Gross <agross@codeaurora.org>
> Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
> Signed-off-by: Jonathan McDowell <noodles@earth.li>
>
> diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
> index 3bcb689162c6..75ee112ccea9 100644
> --- a/drivers/dma/qcom/Kconfig
> +++ b/drivers/dma/qcom/Kconfig
> @@ -28,3 +28,13 @@ config QCOM_HIDMA
> (user to kernel, kernel to kernel, etc.). It only supports
> memcpy interface. The core is not intended for general
> purpose slave DMA.
> +
> +config QCOM_ADM

alphabetical sort please

> + tristate "Qualcomm ADM support"
> + depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)

Why COMPILE_TEST && OF? just COMPILE_TEST should be fine


> + select DMA_ENGINE
> + select DMA_VIRTUAL_CHANNELS
> + ---help---
> + Enable support for the Qualcomm ADM DMA controller. This controller
> + provides DMA capabilities for both general purpose and on-chip
> + peripheral devices.
> diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
> index 1ae92da88b0c..98a021fc6fe5 100644
> --- a/drivers/dma/qcom/Makefile
> +++ b/drivers/dma/qcom/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
> hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
> obj-$(CONFIG_QCOM_HIDMA) += hdma.o
> hdma-objs := hidma_ll.o hidma.o hidma_dbg.o
> +obj-$(CONFIG_QCOM_ADM) += qcom_adm.o

alphabetical sort please

> diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c
> new file mode 100644
> index 000000000000..36d16c5e1515
> --- /dev/null
> +++ b/drivers/dma/qcom/qcom_adm.c
> @@ -0,0 +1,914 @@
> +/*
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.

SPDX tags please

> +/* channel status */
> +#define ADM_CH_STATUS_VALID BIT(1)
> +
> +/* channel result */
> +#define ADM_CH_RSLT_VALID BIT(31)
> +#define ADM_CH_RSLT_ERR BIT(3)
> +#define ADM_CH_RSLT_FLUSH BIT(2)
> +#define ADM_CH_RSLT_TPD BIT(1)
> +
> +/* channel conf */
> +#define ADM_CH_CONF_SHADOW_EN BIT(12)
> +#define ADM_CH_CONF_MPU_DISABLE BIT(11)
> +#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
> +#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
> +#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))

USE FIELD_PREP for this?

> +/* channel result conf */
> +#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
> +#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
> +
> +/* CRCI CTL */
> +#define ADM_CRCI_CTL_MUX_SEL BIT(18)
> +#define ADM_CRCI_CTL_RST BIT(17)
> +
> +/* CI configuration */
> +#define ADM_CI_RANGE_END(x) (x << 24)
> +#define ADM_CI_RANGE_START(x) (x << 16)
> +#define ADM_CI_BURST_4_WORDS BIT(2)
> +#define ADM_CI_BURST_8_WORDS BIT(3)
> +
> +/* GP CTL */
> +#define ADM_GP_CTL_LP_EN BIT(12)
> +#define ADM_GP_CTL_LP_CNT(x) (x << 8)
> +
> +/* Command pointer list entry */
> +#define ADM_CPLE_LP BIT(31)
> +#define ADM_CPLE_CMD_PTR_LIST BIT(29)
> +
> +/* Command list entry */
> +#define ADM_CMD_LC BIT(31)
> +#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
> +#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
> +
> +#define ADM_CMD_TYPE_SINGLE 0x0
> +#define ADM_CMD_TYPE_BOX 0x3
> +
> +#define ADM_CRCI_MUX_SEL BIT(4)
> +#define ADM_DESC_ALIGN 8
> +#define ADM_MAX_XFER (SZ_64K-1)
> +#define ADM_MAX_ROWS (SZ_64K-1)

space around - please

> +/**
> + * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
> + *
> + * @achan: ADM channel
> + * @desc: Descriptor memory pointer
> + * @sg: Scatterlist entry
> + * @crci: CRCI value
> + * @burst: Burst size of transaction
> + * @direction: DMA transfer direction
> + */
> +static void *adm_process_fc_descriptors(struct adm_chan *achan,
> + void *desc, struct scatterlist *sg, u32 crci, u32 burst,
> + enum dma_transfer_direction direction)

please align these to preceding parenthesis. Note checkpatch with
--strict option will tell you about the style issues

> +static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
> + struct scatterlist *sgl, unsigned int sg_len,
> + enum dma_transfer_direction direction, unsigned long flags,
> + void *context)
> +{
> + struct adm_chan *achan = to_adm_chan(chan);
> + struct adm_device *adev = achan->adev;
> + struct adm_async_desc *async_desc;
> + struct scatterlist *sg;
> + dma_addr_t cple_addr;
> + u32 i, burst;
> + u32 single_count = 0, box_count = 0, crci = 0;
> + void *desc;
> + u32 *cple;
> + int blk_size = 0;
> +
> + if (!is_slave_direction(direction)) {
> + dev_err(adev->dev, "invalid dma direction\n");
> + return NULL;
> + }
> +
> + /*
> + * get burst value from slave configuration
> + */
> + burst = (direction == DMA_MEM_TO_DEV) ?
> + achan->slave.dst_maxburst :
> + achan->slave.src_maxburst;
> +
> + /* if using flow control, validate burst and crci values */
> + if (achan->slave.device_fc) {
> +
> + blk_size = adm_get_blksize(burst);
> + if (blk_size < 0) {
> + dev_err(adev->dev, "invalid burst value: %d\n",
> + burst);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + crci = achan->slave.slave_id & 0xf;
> + if (!crci || achan->slave.slave_id > 0x1f) {
> + dev_err(adev->dev, "invalid crci value\n");
> + return ERR_PTR(-EINVAL);
> + }
> + }
> +
> + /* iterate through sgs and compute allocation size of structures */
> + for_each_sg(sgl, sg, sg_len, i) {
> + if (achan->slave.device_fc) {
> + box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
> + ADM_MAX_ROWS);
> + if (sg_dma_len(sg) % burst)
> + single_count++;
> + } else {
> + single_count += DIV_ROUND_UP(sg_dma_len(sg),
> + ADM_MAX_XFER);
> + }
> + }
> +
> + async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC);

GFP_NOWAIT please

> +static int adm_dma_probe(struct platform_device *pdev)
> +{
> + struct adm_device *adev;
> + struct resource *iores;
> + int ret;
> + u32 i;
> +
> + adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
> + if (!adev)
> + return -ENOMEM;
> +
> + adev->dev = &pdev->dev;
> +
> + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + adev->regs = devm_ioremap_resource(&pdev->dev, iores);

devm_platform_ioremap_resource() pls

> + if (IS_ERR(adev->regs))
> + return PTR_ERR(adev->regs);
> +
> + adev->irq = platform_get_irq(pdev, 0);
> + if (adev->irq < 0)
> + return adev->irq;
> +
> + ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
> + if (ret) {
> + dev_err(adev->dev, "Execution environment unspecified\n");
> + return ret;
> + }
> +
> + adev->core_clk = devm_clk_get(adev->dev, "core");
> + if (IS_ERR(adev->core_clk))
> + return PTR_ERR(adev->core_clk);
> +
> + ret = clk_prepare_enable(adev->core_clk);
> + if (ret) {
> + dev_err(adev->dev, "failed to prepare/enable core clock\n");
> + return ret;
> + }
> +
> + adev->iface_clk = devm_clk_get(adev->dev, "iface");
> + if (IS_ERR(adev->iface_clk)) {
> + ret = PTR_ERR(adev->iface_clk);
> + goto err_disable_core_clk;
> + }
> +
> + ret = clk_prepare_enable(adev->iface_clk);
> + if (ret) {
> + dev_err(adev->dev, "failed to prepare/enable iface clock\n");
> + goto err_disable_core_clk;
> + }
> +
> + adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
> + if (IS_ERR(adev->clk_reset)) {
> + dev_err(adev->dev, "failed to get ADM0 reset\n");
> + ret = PTR_ERR(adev->clk_reset);
> + goto err_disable_clks;
> + }
> +
> + adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
> + if (IS_ERR(adev->c0_reset)) {
> + dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
> + ret = PTR_ERR(adev->c0_reset);
> + goto err_disable_clks;
> + }
> +
> + adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
> + if (IS_ERR(adev->c1_reset)) {
> + dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
> + ret = PTR_ERR(adev->c1_reset);
> + goto err_disable_clks;
> + }
> +
> + adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
> + if (IS_ERR(adev->c2_reset)) {
> + dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
> + ret = PTR_ERR(adev->c2_reset);
> + goto err_disable_clks;
> + }
> +
> + reset_control_assert(adev->clk_reset);
> + reset_control_assert(adev->c0_reset);
> + reset_control_assert(adev->c1_reset);
> + reset_control_assert(adev->c2_reset);
> +

No delay?

> +static int adm_dma_remove(struct platform_device *pdev)
> +{
> + struct adm_device *adev = platform_get_drvdata(pdev);
> + struct adm_chan *achan;
> + u32 i;
> +
> + of_dma_controller_free(pdev->dev.of_node);
> + dma_async_device_unregister(&adev->common);
> +
> + for (i = 0; i < ADM_MAX_CHANNELS; i++) {
> + achan = &adev->channels[i];
> +
> + /* mask IRQs for this channel/EE pair */
> + writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
> +
> + adm_terminate_all(&adev->channels[i].vc.chan);
> + }
> +
vchan_tasklet needs to be killed here

--
~Vinod

\
 
 \ /
  Last update: 2020-09-18 13:35    [W:0.097 / U:3.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site