lkml.org 
[lkml]   [2020]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] PCI: dwc: Added link up check in map_bus of dw_child_pcie_ops
Date
Hi Rob,

Thanks a lot for your comments!

> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: 2020年9月17日 4:29
> To: Z.q. Hou <zhiqiang.hou@nxp.com>
> Cc: linux-kernel@vger.kernel.org; PCI <linux-pci@vger.kernel.org>; Lorenzo
> Pieralisi <lorenzo.pieralisi@arm.com>; Bjorn Helgaas
> <bhelgaas@google.com>; Gustavo Pimentel
> <gustavo.pimentel@synopsys.com>; Michael Walle <michael@walle.cc>;
> Ard Biesheuvel <ardb@kernel.org>
> Subject: Re: [PATCH] PCI: dwc: Added link up check in map_bus of
> dw_child_pcie_ops
>
> On Tue, Sep 15, 2020 at 11:49 PM Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
> wrote:
> >
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > On NXP Layerscape platforms, it results in SError in the enumeration
> > of the PCIe controller, which is not connecting with an Endpoint
> > device. And it doesn't make sense to enumerate the Endpoints when the
> > PCIe link is down. So this patch added the link up check to avoid to
> > fire configuration transactions on link down bus.
>
> Michael reported the same issue as well.
>
> What happens if the link goes down between the check and the access?

This patch cannot cover this case, and will get the SError.
But I think it makes sense to avoid firing transactions on link down bus.

> It's a racy check. I'd like to find an alternative solution. It's even worse if
> Layerscape is used in ECAM mode. I looked at the EDK2 setup for
> layerscape[1] and it looks like root ports are just skipped if link is down.
> Maybe a link down just never happens once up, but if so, then we only need
> to check it once and fail probe.

Many customers connect the FPGA Endpoint, which may establish PCIe link
after the PCIe enumeration and then rescan the PCIe bus, so I think it should
not exit the probe of root port even if there is not link up during enumeration.

>
> I've dug into this a bit more and am curious about the PCIE_ABSERR register
> setting which is set to:
>
> #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted
> request */
>
> It seems to me this is not what we want at least for config accesses, but
> commit 84d897d6993 where this was added seems to say otherwise. Is it not
> possible to configure the response per access type?

Thanks a lot for your investigation!
The story is like this: Some customers worry about these silent error (DWC PCIe
IP won't forward the error of outbound non-post request by default), so we
were pushed to enable the error forwarding to AXI in the commit
84d897d6993 as you saw. But it cannot differentiate the config transactions
from the MEM_rd, except the Vendor ID access, which is controlled by
a separate bit and it was set to not forward error of access of Vendor ID.
So we think it's okay to enable the error forwarding, the SError should not
occur, because after the enumeration it won't access the non-existent functions.

But now the SError is exactly caused by the first access of the non-existent
function, I dug into the kernel enumeration code and found it will fire a 4Byte
CFG read transaction to read the Vendor ID and Device ID together, so I suspect
the root cause is access the Device ID of a non-existent function triggers SError.

So the alternative solution seems to correct the PCIe enumeration, I will submit
a patch to let the first access only read the Vendor ID.

Thanks,
Zhiqiang

>
> This appears to be a standard DWC register as the tegra driver defines this
> address as PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT. Perhaps
> someone can shed some light on what this register contains.
>
> Rob
>
> [1]
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.lin
> aro.org%2Fleg%2Fnoupstream%2Fedk2-platforms.git%2Ftree%2FSilicon%2F
> NXP%2FLibrary%2FPciHostBridgeLib%2FPciHostBridgeLib.c%3Fh%3Ddevelop
> er-box%23n756&amp;data=02%7C01%7CZhiqiang.Hou%40nxp.com%7Cfa38
> f3e83d0c49983e0c08d85a7f2d5e%7C686ea1d3bc2b4c6fa92cd99c5c301635
> %7C0%7C0%7C637358849549791506&amp;sdata=bJ3uDUm%2FT%2FzC6qz
> GX7NNHQZdDxNFZ%2BBtcEQ3sLQIE4M%3D&amp;reserved=0
>
>
> >
> > [ 0.807773] SError Interrupt on CPU2, code 0xbf000002 -- SError
> > [ 0.807775] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
> > [ 0.807776] Hardware name: LS1046A RDB Board (DT)
> > [ 0.807777] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
> > [ 0.807778] pc : pci_generic_config_read+0x3c/0xe0
> > [ 0.807778] lr : pci_generic_config_read+0x24/0xe0
> > [ 0.807779] sp : ffff80001003b7b0
> > [ 0.807780] x29: ffff80001003b7b0 x28: ffff80001003ba74
> > [ 0.807782] x27: ffff000971d96800 x26: ffff00096e77e0a8
> > [ 0.807784] x25: ffff80001003b874 x24: ffff80001003b924
> > [ 0.807786] x23: 0000000000000004 x22: 0000000000000000
> > [ 0.807788] x21: 0000000000000000 x20: ffff80001003b874
> > [ 0.807790] x19: 0000000000000004 x18: ffffffffffffffff
> > [ 0.807791] x17: 00000000000000c0 x16: fffffe0025981840
> > [ 0.807793] x15: ffffb94c75b69948 x14: 62203a383634203a
> > [ 0.807795] x13: 666e6f635f726568 x12: 202c31203d207265
> > [ 0.807797] x11: 626d756e3e2d7375 x10: 656877202c307830
> > [ 0.807799] x9 : 203d206e66766564 x8 : 0000000000000908
> > [ 0.807801] x7 : 0000000000000908 x6 : ffff800010900000
> > [ 0.807802] x5 : ffff00096e77e080 x4 : 0000000000000000
> > [ 0.807804] x3 : 0000000000000003 x2 : 84fa3440ff7e7000
> > [ 0.807806] x1 : 0000000000000000 x0 : ffff800010034000
> > [ 0.807808] Kernel panic - not syncing: Asynchronous SError Interrupt
> > [ 0.807809] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
> > [ 0.807810] Hardware name: LS1046A RDB Board (DT)
> > [ 0.807811] Call trace:
> > [ 0.807812] dump_backtrace+0x0/0x1c0
> > [ 0.807813] show_stack+0x18/0x28
> > [ 0.807814] dump_stack+0xd8/0x134
> > [ 0.807814] panic+0x180/0x398
> > [ 0.807815] add_taint+0x0/0xb0
> > [ 0.807816] arm64_serror_panic+0x78/0x88
> > [ 0.807817] do_serror+0x68/0x180
> > [ 0.807818] el1_error+0x84/0x100
> > [ 0.807818] pci_generic_config_read+0x3c/0xe0
> > [ 0.807819] dw_pcie_rd_other_conf+0x78/0x110
> > [ 0.807820] pci_bus_read_config_dword+0x88/0xe8
> > [ 0.807821] pci_bus_generic_read_dev_vendor_id+0x30/0x1b0
> > [ 0.807822] pci_bus_read_dev_vendor_id+0x4c/0x78
> > [ 0.807823] pci_scan_single_device+0x80/0x100
> > [ 0.807824] pci_scan_slot+0x38/0x130
> > [ 0.807825] pci_scan_child_bus_extend+0x54/0x2a0
> > [ 0.807826] pci_scan_child_bus+0x14/0x20
> > [ 0.807827] pci_scan_bridge_extend+0x230/0x570
> > [ 0.807828] pci_scan_child_bus_extend+0x134/0x2a0
> > [ 0.807829] pci_scan_root_bus_bridge+0x64/0xf0
> > [ 0.807829] pci_host_probe+0x18/0xc8
> > [ 0.807830] dw_pcie_host_init+0x220/0x378
> > [ 0.807831] ls_pcie_probe+0x104/0x140
> > [ 0.807832] platform_drv_probe+0x54/0xa8
> > [ 0.807833] really_probe+0x118/0x3e0
> > [ 0.807834] driver_probe_device+0x5c/0xc0
> > [ 0.807835] device_driver_attach+0x74/0x80
> > [ 0.807835] __driver_attach+0x8c/0xd8
> > [ 0.807836] bus_for_each_dev+0x7c/0xd8
> > [ 0.807837] driver_attach+0x24/0x30
> > [ 0.807838] bus_add_driver+0x154/0x200
> > [ 0.807839] driver_register+0x64/0x120
> > [ 0.807839] __platform_driver_probe+0x7c/0x148
> > [ 0.807840] ls_pcie_driver_init+0x24/0x30
> > [ 0.807841] do_one_initcall+0x60/0x1d8
> > [ 0.807842] kernel_init_freeable+0x1f4/0x24c
> > [ 0.807843] kernel_init+0x14/0x118
> > [ 0.807843] ret_from_fork+0x10/0x34
> > [ 0.807854] SMP: stopping secondary CPUs
> > [ 0.807855] Kernel Offset: 0x394c64080000 from 0xffff800010000000
> > [ 0.807856] PHYS_OFFSET: 0xffff8bfd40000000
> > [ 0.807856] CPU features: 0x0240022,21806000
> > [ 0.807857] Memory Limit: none
> >
> > Fixes: c2b0c098fbd1 ("PCI: dwc: Use generic config accessors")
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > ---
> > drivers/pci/controller/dwc/pcie-designware-host.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c
> > b/drivers/pci/controller/dwc/pcie-designware-host.c
> > index c01c9d2fb3f9..e82b518430c5 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> > @@ -442,6 +442,9 @@ static void __iomem
> *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
> > struct pcie_port *pp = bus->sysdata;
> > struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> >
> > + if (!dw_pcie_link_up(pci))
> > + return NULL;
> > +
> > busdev = PCIE_ATU_BUS(bus->number) |
> PCIE_ATU_DEV(PCI_SLOT(devfn)) |
> > PCIE_ATU_FUNC(PCI_FUNC(devfn));
> >
> > --
> > 2.17.1
> >
\
 
 \ /
  Last update: 2020-09-18 13:02    [W:0.215 / U:3.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site