lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH v2 1/1] fpga: dfl: afu: harden port enable logic
Date
> -----Original Message-----
> From: Russ Weight <russell.h.weight@intel.com>
> Sent: Friday, September 18, 2020 2:32 AM
> To: mdf@kernel.org; linux-fpga@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Cc: trix@redhat.com; lgoncalv@redhat.com; Xu, Yilun <yilun.xu@intel.com>;
> Wu, Hao <hao.wu@intel.com>; Gerlach, Matthew
> <matthew.gerlach@intel.com>; Weight, Russell H
> <russell.h.weight@intel.com>
> Subject: [PATCH v2 1/1] fpga: dfl: afu: harden port enable logic
>
> Port enable is not complete until ACK = 0. Change
> __afu_port_enable() to guarantee that the enable process
> is complete by polling for ACK == 0.

The description of this port reset ack bit is

" After initiating a Port soft reset, SW should monitor this bit. HW
will set this bit when all outstanding requests initiated by this port
have been drained, and the minimum soft reset pulse width has
elapsed. "

But no description about what to do when clearing a Port soft reset
to enable the port.

So we need to understand clearly on why we need this change
(e.g. what may happen without this change), and will it apply for all
existing DFL devices and future ones, or just for one specific card.
Could you please help? : )

>
> Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> ---
> drivers/fpga/dfl-afu-error.c | 2 +-
> drivers/fpga/dfl-afu-main.c | 29 +++++++++++++++++++++--------
> drivers/fpga/dfl-afu.h | 2 +-
> 3 files changed, 23 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/fpga/dfl-afu-error.c b/drivers/fpga/dfl-afu-error.c
> index c4691187cca9..0806532a3e9f 100644
> --- a/drivers/fpga/dfl-afu-error.c
> +++ b/drivers/fpga/dfl-afu-error.c
> @@ -103,7 +103,7 @@ static int afu_port_err_clear(struct device *dev, u64
> err)
> __afu_port_err_mask(dev, false);
>
> /* Enable the Port by clear the reset */
> - __afu_port_enable(pdev);
> + ret = __afu_port_enable(pdev);
>
> done:
> mutex_unlock(&pdata->lock);
> diff --git a/drivers/fpga/dfl-afu-main.c b/drivers/fpga/dfl-afu-main.c
> index 753cda4b2568..f73b06cdf13c 100644
> --- a/drivers/fpga/dfl-afu-main.c
> +++ b/drivers/fpga/dfl-afu-main.c
> @@ -21,6 +21,9 @@
>
> #include "dfl-afu.h"
>
> +#define RST_POLL_INVL 10 /* us */
> +#define RST_POLL_TIMEOUT 1000 /* us */
> +
> /**
> * __afu_port_enable - enable a port by clear reset
> * @pdev: port platform device.
> @@ -32,7 +35,7 @@
> *
> * The caller needs to hold lock for protection.
> */
> -void __afu_port_enable(struct platform_device *pdev)
> +int __afu_port_enable(struct platform_device *pdev)
> {
> struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev-
> >dev);
> void __iomem *base;
> @@ -41,7 +44,7 @@ void __afu_port_enable(struct platform_device *pdev)
> WARN_ON(!pdata->disable_count);
>
> if (--pdata->disable_count != 0)
> - return;
> + return 0;
>
> base = dfl_get_feature_ioaddr_by_id(&pdev->dev,
> PORT_FEATURE_ID_HEADER);
>
> @@ -49,10 +52,20 @@ void __afu_port_enable(struct platform_device
> *pdev)
> v = readq(base + PORT_HDR_CTRL);
> v &= ~PORT_CTRL_SFTRST;
> writeq(v, base + PORT_HDR_CTRL);
> -}
>
> -#define RST_POLL_INVL 10 /* us */
> -#define RST_POLL_TIMEOUT 1000 /* us */
> + /*
> + * HW clears the ack bit to indicate that the port is fully out
> + * of reset.
> + */
> + if (readq_poll_timeout(base + PORT_HDR_CTRL, v,
> + !(v & PORT_CTRL_SFTRST_ACK),
> + RST_POLL_INVL, RST_POLL_TIMEOUT)) {
> + dev_err(&pdev->dev, "timeout, failure to enable device\n");
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +}
>
> /**
> * __afu_port_disable - disable a port by hold reset
> @@ -111,7 +124,7 @@ static int __port_reset(struct platform_device *pdev)
>
> ret = __afu_port_disable(pdev);
> if (!ret)
> - __afu_port_enable(pdev);
> + ret = __afu_port_enable(pdev);
>
> return ret;

What about:

ret = __afu_port_disable(pdev);
if (ret)
return ret;

return __afu_port_enable(pdev);

Thanks
Hao

> }
> @@ -872,11 +885,11 @@ static int afu_dev_destroy(struct platform_device
> *pdev)
> static int port_enable_set(struct platform_device *pdev, bool enable)
> {
> struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev-
> >dev);
> - int ret = 0;
> + int ret;
>
> mutex_lock(&pdata->lock);
> if (enable)
> - __afu_port_enable(pdev);
> + ret = __afu_port_enable(pdev);
> else
> ret = __afu_port_disable(pdev);
> mutex_unlock(&pdata->lock);
> diff --git a/drivers/fpga/dfl-afu.h b/drivers/fpga/dfl-afu.h
> index 576e94960086..e5020e2b1f3d 100644
> --- a/drivers/fpga/dfl-afu.h
> +++ b/drivers/fpga/dfl-afu.h
> @@ -80,7 +80,7 @@ struct dfl_afu {
> };
>
> /* hold pdata->lock when call __afu_port_enable/disable */
> -void __afu_port_enable(struct platform_device *pdev);
> +int __afu_port_enable(struct platform_device *pdev);
> int __afu_port_disable(struct platform_device *pdev);
>
> void afu_mmio_region_init(struct dfl_feature_platform_data *pdata);
> --
> 2.17.1

\
 
 \ /
  Last update: 2020-09-18 04:49    [W:0.157 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site