lkml.org 
[lkml]   [2020]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] iio: dac: ti-dac7612: Replace indio_dev->mlock with own device lock
Date
From: Sergiu Cuciurean <sergiu.cuciurean@analog.com>

As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state from potential concurrent write
accesses from userspace. The write operation requires an SPI write, then
toggling of a GPIO, so the lock aims to protect the sanity of the entire
sequence of operation.

This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/

Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/dac/ti-dac7612.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c
index 07c9f39d54f1..4c0f4b5e9ff4 100644
--- a/drivers/iio/dac/ti-dac7612.c
+++ b/drivers/iio/dac/ti-dac7612.c
@@ -22,6 +22,14 @@ struct dac7612 {
struct gpio_desc *loaddacs;
uint16_t cache[2];

+ /*
+ * Lock to protect the state of the device from potential concurrent
+ * write accesses from userspace. The write operation requires an
+ * SPI write, then toggling of a GPIO, so the lock aims to protect
+ * the sanity of the entire sequence of operation.
+ */
+ struct mutex lock;
+
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
@@ -101,9 +109,9 @@ static int dac7612_write_raw(struct iio_dev *iio_dev,
if (val == priv->cache[chan->channel])
return 0;

- mutex_lock(&iio_dev->mlock);
+ mutex_lock(&priv->lock);
ret = dac7612_cmd_single(priv, chan->channel, val);
- mutex_unlock(&iio_dev->mlock);
+ mutex_unlock(&priv->lock);

return ret;
}
@@ -145,6 +153,8 @@ static int dac7612_probe(struct spi_device *spi)
iio_dev->num_channels = ARRAY_SIZE(priv->cache);
iio_dev->name = spi_get_device_id(spi)->name;

+ mutex_init(&priv->lock);
+
for (i = 0; i < ARRAY_SIZE(priv->cache); i++) {
ret = dac7612_cmd_single(priv, i, 0);
if (ret)
--
2.17.1
\
 
 \ /
  Last update: 2020-09-16 11:26    [W:0.064 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site