lkml.org 
[lkml]   [2020]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] dt-bindings: interrupt-controller: add Hisilicon SD5203 vector interrupt controller
From
Date


On 2020/9/15 14:12, Leizhen (ThunderTown) wrote:
>
>
> On 2020/9/15 4:31, Rob Herring wrote:
>> On Thu, Sep 03, 2020 at 08:05:03PM +0800, Zhen Lei wrote:
>>> Add DT bindings for the Hisilicon SD5203 vector interrupt controller.
>>>
>>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>>> ---
>>> .../hisilicon,sd5203-vic.txt | 27 +++++++++++++++++++
>>
>> Bindings should be in DT schema format now.

Do I need to change the existing "snps,dw-apb-ictl.txt" to DT schema format?

>
> Hi, Rob Herring:
>
> As Marc Zyngier's suggestion, I discarded adding an independent SD5203-VIC
> driver, but make the dw-apb-ictl irqchip driver to support hierarchy irq domain.
> So this new file was also dropped. Now, I updated the descriptions in the existing
> file "snps,dw-apb-ictl.txt" in the following versions.
>
>>
>>> 1 file changed, 27 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,sd5203-vic.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,sd5203-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,sd5203-vic.txt
>>> new file mode 100644
>>> index 000000000000..a08292e868b0
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,sd5203-vic.txt
>>> @@ -0,0 +1,27 @@
>>> +Hisilicon SD5203 vector interrupt controller (VIC)
>>> +
>>> +Hisilicon SD5203 VIC based on Synopsys DesignWare APB interrupt controller, but
>>> +there's something special:
>>> +1. The maximum number of irqs supported is 32. The registers ENABLE, MASK and
>>> + FINALSTATUS are 32 bits.
>>> +2. There is only one VIC, it's used as primary interrupt controller.
>>> +
>>> +Required properties:
>>> +- compatible: shall be "hisilicon,sd5203-vic"
>>> +- reg: physical base address of the controller and length of memory mapped
>>> + region starting with ENABLE_LOW register
>>> +- interrupt-controller: identifies the node as an interrupt controller
>>> +- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
>>> +
>>> +The interrupt sources map to the corresponding bits in the interrupt
>>> +registers, i.e.
>>> +- 0 maps to bit 0 of low interrupts,
>>> +- 1 maps to bit 1 of low interrupts,
>>> +
>>> +Example:
>>> + vic: interrupt-controller@10130000 {
>>> + compatible = "hisilicon,sd5203-vic";
>>> + reg = <0x10130000 0x1000>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <1>;
>>> + };
>>> --
>>> 2.26.0.106.g9fadedd
>>>
>>>
>>
>> .
>>

\
 
 \ /
  Last update: 2020-09-17 05:30    [W:0.046 / U:1.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site